Vanguard's ALTA GH-100 Pistol-Grip Ballhead combines impressive ergonomic control with a precise, smooth ball head. With a safe payload capacity of 6 kg/13.2 lbs, this lightweight pistol grip allows you to lock, unlock, and reposition your gear comfortably with one hand, leaving your other hand free to make lens adjustments.

Never waver – Pistol grip provides secure one-handed operation of head controls
Versatile – Outstanding for still photography, videography or even surveillance
Control– Friction Control System allows you to control the level of friction on the ball to accommodate changing equipment weight and to control weight balance
Robustness – Magnesium alloy construction for lightweight and long-lasting performance
Precise – 72 built-in click stops, Bubble level for precise panoramic photo and videography
Custom fit - 8-stop Handle positioning for superior ergonomics
Smooth – Anodized center ball allows for extremely fluid movement without sacrificing precise control
Optimum load performance – 6kg (13.2 lbs) safety payload for multi-gear options
Safe – Arca-type quick release system & Dual-locking quick shoe mechanism
Pan Head Base – 58mm with 3/8 to ¼ reducer bushing

The ALTA PH-114V is a lightweight video head with fluid action movements, incorporates an Arca-type quick release system and has an ergonomic long handle for smooth pans and tilts.

Lightweight Magnesium alloy construction provides long-lasting performance and durability
Fluid action movements
Ergonomic long handle for smooth pans and tilts
Bubble level for precise leveling
High working load performance 17.6lbs./8kg
Arca-type quick release system with a built-in safety pin
58mm Pan Head Base
Easily Connects to all types of tripods using the 3/8”-16 receiver

Key Features
Load Capacity: 15.4 lb
Maximum Height: 59"
Folded Length: 19.9"
Tiltable & Rotatable Rapid Center Column
Leg Angle Selector: 20/40/60/80 Degrees
Ball-and-Socket Tripod Head
Arca-Type Compatible Clamp
360 Degree Pan with Independent Pan Lock
90 Degree Vertical Tilt
Two Bubble Levels
The Vanguard Alta Pro 2+ 264AT Aluminum Tripod supports up to 15.4 lb, measures 19.9" when folded, and can be positioned to a maximum height of 59" with its push-and-pull, rapid center column fully raised. Its 4-section legs each feature an independent 20°, 40°, 60°, or 80° spread as well as 35° twist locks for rapid adjustments. Non-slip, all-weather TPU grips on two of the legs provide a secure, comfortable grip while moving the tripod, and rubber feet enhance stability on a wide variety of surfaces.

Tripod heads, cameras, lenses, or sport optics that are compatible with 1/4"-20 or 3/8"-16 male threads connect to top of the tripod's stable, hexagonal, cross arm-type center column that can be positioned horizontally like a small boom in in 15° increments. This allows for a very low minimum working distances that are ideal for macro work. A tripod bag with shoulder strap is included for storage and transport.

MACC (Multi-Angle Center Column System):
With a unique quick action center column has simple and intuitive twist and lock positioning at any angle in 15° steps with a rotation range of -90° to +90°.
Central Column and Lock Mechanism
The mechanism offers one-handed, effortless smooth operation and rapid set-up, while the unique hexagonal central column ensures enhanced rigidity and stability.
Leg Angle Selector
Achieve ideal positioning and balance of the tripod to match any working terrain, by using the strong and steady 4-angle leg setting options of 20°, 40°, 60°, or 80°.
Advanced Twist-Lock
Fast 35° turn to lock or unlock ensures instant leg extension/retraction. This system is engineered to support a high load capacity in comparison with other tripods in its class.
ALTA Link
The tripod is fitted with a 3/8"-16 threaded connector, which allow easy attachment of additional accessories, such as lighting equipment and articulated or flexible arms, thus offering users new creative possibilities.
Multi Featured
Its many features include: fitted bubble level and dedicated suspension loop to ensure ideal positioning and additional stability by hanging a counterweight or bags; non-slip, all-weather TPU grips on 2 legs; angled rubber feet to ensure a secure grip on any terrain (spiked feet sold separately). Included tripod bag is designed to fit any standard head combo.

Vanguard Alta BH-100 Ball Head
The Vanguard Alta BH-100 is an Arca-type ball head that has a load capacity of 22.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount.

Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QS-60 V2 Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Within the recessed surface between the clamp's jaws is a retaining pin. This pin prevents an installed QS-60 V2 Quick Release Plate from accidentally sliding off when the clamp is opened. The quick release plate features a rubberized, non-slip platform while two built-in bubble levels along the edges of the clamp accommodate landscape or portrait orientations.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located above the primary locking knob. Toward the side of the ball head opposite the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.

Arca-type ball head with 22.0 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Large, primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
Knurled friction knob located above the primary locking knob applies variable tension on the ball-and-socket joint's movements
Secondary locking knob with knurled surface allows head to rotate 360°
Integrated clamp on top of on the ball-and-socket joint is compatible with included QS-60 V2 Quick Release Plate
Two built-in bubble levels along the edges of the clamp accommodate landscape or portrait orientations
Integrated retaining pin on the clamp prevents QS-60 V2 Quick Release Plate from accidentally sliding off when the clamp is opened
Durable, aluminum-alloy construction

The VEO 3 GO 235CB is an ultra-compact and lightweight carbon fiber travel tripod with an Arca-Swiss-compatible ball head, a leg that converts to a monopod (which can double as a selfie/vlogging stick), a smartphone adapter, and a Bluetooth remote shutter trigger, offering maximum versatility for mirrorless camera kits, DSLR camera kits, and even smartphones.

Folds down to just 13 inches and weighs just 2.3 pounds for maximum portability
Extends to 53.5 inches, with a maximum load capacity up to 8.8 pounds
Monopod leg that extends to 54.3 inches is fast and easy to deploy
Arca-Swiss-compatible T-50 Ball Head with independent pan-lock
Reversible center column; or, use the Low-Angle Adapter for low-angle/macro photographs
Three easy-set leg angles (21°, 50° and 80°) for maximum stability on any terrain
Rapid-set and easy-to-clean twist locks
Includes rubber and spiked feet that allow for easy setup on different types of terrain
Retractable hook to add weight for extra stability
Includes a tripod bag
Reversible thread to allow heads with 1/4” or 3/8” thread to be attached with ease
Includes smartphone connector for any smartphone up to 3.4 inches wide
Bluetooth remote shutter trigger allows the monopod leg to be used as a selfie stick

The most compact of the Vanguard VEO 3T series, the 204ABP is an aluminum travel tripod that boasts an array of versatile features and new design improvements for stability, portability, and reliability. It’s the perfect solution for bloggers, streamers, photographers, and videographers on the go.

Classic design elements meet leading-edge engineering
Folds down and then out again quickly for max portability
Three easy-set leg angles – from up high to low angle, plus invertible center column for macro shots
Converts to a monopod in three easy steps
Canopy is built tough from a block of aircraft-grade aluminum and features a bubble level and two additional 3/8” threads to add more accessories
Arca-compatible VEO 2 BP-45T ball head with removable panhandle and Quick Shoe with a built-in universal smartphone connector
Includes Bluetooth remote, spiked feet, low-angle adapter, premium tripod bag, Allen keys, and 3/8” to ¼” adapter

Brand VANGUARD
Color Black
Compatible Devices Smartphone, Mirrorless and DSLR Cameras
Special Feature Rotatable, Adjustable
Material Aluminum
Item Weight 3 Pounds
Weight Limit 8.8 Pounds
Model Name VEO3T204CBP Carbon Fiber Travel Tripod
Maximum Height 55 Inches
Tripod Head Type Ball Heads
Classic design elements meet leading-edge engineering. Folds down and then out again quickly for maximum portability
Converts to a monopod in three easy steps. Canopy is built tough from a block of aircraft-grade aluminum and features a bubble level and two additional 3/8” threads to add more accessories
Arca-compatible VEO 2 BP-45T ball head with removable panhandle and Quick Shoe with a built-in universal smartphone connector
Includes Bluetooth remote, spiked feet, low-angle adapter, premium tripod bag, Allen keys, and 3/8” to ¼” adapter
Folded length: 15.9" Extended height: 55.1" Weight: 3 pounds Max. load: 8.8 pounds

The professional NP-50S is the longer and narrower version of the NP-50. With this Arca-Swiss plate you quickly mount a camera safely and securely on a tripod head.

About this item
►Clamp accommodates Arca-swiss / RRS plates
►Clamp length: 45mm.►Includes 52mm QR Plate.
►Ball Diameter: 36mm.
►Base diameter: 45mm.
►Max load: 10kg (22 lbs).

Key Features
Compact Video Head with Flat Base
8.8 lb Maximum Load, Bubble Level
Arca-Type Sliding Quick Release Plate
Independent Pan and Tilt Locks
1/4"-20 Accessory Thread on Each Side
Measurement Markings on Base and Plate
Adjustable Pan Bar, Left/Right Mounts
Durable Aluminum Construction
Add a compact fluid head to your travel or mobile camera rig with the Mini Fluid Head with Arca-Type Plate from Leofoto. This durable aluminum mini fluid head weighs only 1.2 lb yet supports up to 8.8 lb, and it features a 2" flat base with an Arca-type sliding quick release plate. It also features a bubble level on top for keeping level with the horizon, and it has measurement markings on the base and a quick release plate to assist with balancing.

Independent pan and tilt locks allow you to keep one axis locked while adjusting the other, or you can lock off the head entirely. It features 360° panning and -75 to 90° tilting for a wide range of movement. The pan handle can be used on the left or right side, and it can be quickly released and installed using the thumb lever. A 1/4"-20 thread on each side allows you to mount additional accessories, such as mounting arms, hooks, and extensions.

The Leofoto LPF-GFX100S L-Bracket for FUJIFILM GFX 100S/GFX 50SII Cameras is designed with anti-twist flanges that prevent the camera from moving within the bracket. Its Arca-type compatible dovetail design enables the camera to mount in a vertical or horizontal position when shooting with compatible tripod head.
Precision Engineered for Fujifilm GFX 100S and GFX 50SII
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum.
Fully Compatible with Arca-Swiss
Weight: 100g/ 0.22lb
Height 93mm/ 3.66"
Length 120mm/ 4.27"
Width 43mm/ 1.69"

Precision Engineered for Fujifilm X-H2 & X-H2s
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum.
Fully Compatible with Arca-Swiss & RRS Clamps
Weight: 125g. Height 90mm. Length 143mm. Width 62mm.

The Leofoto LPFO-X-T5 L Plate for Fujifilm X-T5 is designed with anti-twist flanges that prevent the camera from moving within the bracket. Its Arca-type compatible dovetail design enables the camera to mount in a vertical or horizontal position when shooting with compatible tripod head.
Precision Engineered for Fujifilm X-T5
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum
Fully Compatible with Arca-Swiss
Weight: 125g/ 0.27lb
Height 84mm/ 3.3in
Length 140mm/ 5.51in
Width 58mm/ 2.28in

The Leofoto LA-284C Athena Series Tripod in Red + LH-30 Ballhead is a stunning carbon fiber tripod with ballhead system that stands out from the crowd. It is designed for use in harsh, wet environments. Made with 10-layer carbon fiber leg tubes and titanium components, it provides excellent corrosion resistance and makes it suitable for use in a variety of conditions. The tripod also features twist-lock joints that repel water, sand, and debris, which helps to minimize the need for maintenance. The LA series tripod features a fixed, compact apex.

Waterproof and sand-proof design
Corrosion-resistant materials
Compact, center column-free design
Fixed apex with 3/8" mounting stud
Independent leg spread
Three Angle Stops: 23-, 55-, and 85°
1/4"-20 threaded Accessory Socket for Monitor, Microphone, LED light or More
Interchangeable Feet (3/8")
Interchangeable titanium foot spike
Carrying Case
10x carbon fiber leg tubes
*Leofoto LA/LP Series tripods are the same tripod with different colors

The included Leofoto LH-30 Low-Profile Ball Head is lightweight aluminum and features an Arca-type compatible quick release system. A precisely-machined ball provides ultra-smooth movements and a large, ergonomically-designed locking knob, enables the movement of the ball head to be controlled. Laser-engraved scales on the panning base provide precise control during panorama shooting and dual drop notches provide the capability for rapidly changing from horizontal to vertical orientation.

Leofoto LA-284C Red Tripod + LH-30 Ballhead:

Max. height: 1290mm / 50.8 inches
Min. height: 160mm / 6.3 inches
Folded length: 540mm / 21.3 inches
Leg sections: 4
Max load: 10kg / 22 pounds
Weight: 1.55kg / 3.42 pounds

The Leofoto LA-324C Athena Series Tripod in Red + LH-40 Ballhead is a stunning carbon fiber tripod with ballhead system that stands out from the crowd. It is designed for use in harsh, wet environments. Made with 10-layer carbon fiber leg tubes and titanium components, it provides excellent corrosion resistance and makes it suitable for use in a variety of conditions. The tripod also features twist-lock joints that repel water, sand, and debris, which helps to minimize the need for maintenance. The LA series tripod features a fixed, compact apex.

Waterproof and sand-proof design
Corrosion-resistant materials
Compact, center column-free design
Fixed apex with 3/8" mounting stud
Independent leg spread
Three Angle Stops: 23-, 55-, and 85°
1/4"-20 threaded Accessory Socket for Monitor, Microphone, LED light or More
Interchangeable Feet (3/8")
Interchangeable titanium foot spike
Carrying Case
10x carbon fiber leg tubes
*Leofoto LA/LP Series tripods are the same tripod with different colors

The included Leofoto LH-40 Low-Profile Ball Head is lightweight aluminum and features an Arca-type compatible quick release system. A precisely-machined ball provides ultra-smooth movements and a large, ergonomically-designed locking knob, enables the movement of the ball head to be controlled. Laser-engraved scales on the panning base provide precise control during panorama shooting and dual drop notches provide the capability for rapidly changing from horizontal to vertical orientation.


Leofoto LA-324C Red Tripod + LH-40 Ballhead:

Max. height: 1395mm / 54.92 inches
Min. height: 165mm / 6.50 inches
Folded length: 580mm / 22.83 inches
Leg Sections: 4
Max load: 15kg / 33.07 pounds
Weight: 1.95kg / 4.30 pounds

Key Features
Load Capacity: 33 lb
Maximum Height: 55"
Folded Length: 22.8"
Leg sections: 4
Weight: 4.3 lb
10x Layer Carbon Fiber Tubing
Corrosion-Resistant Titanium Spiked Feet
Water and Sand Proof Twist-Lock Joints
LH-40 Low Profile Arca-Type Head
Quick Release Plate Included
The LP-324C Poseidon-Series Waterproof Carbon Fiber Tripod with LH-40 Ball Head from Leofoto is a compact carbon-fiber travel tripod made with corrosion-resistant titanium and 6061-T6 aluminum components that is designed to perform on beaches and in snowy conditions that would render other tripods useless. The maintenance free, waterproof twist-lock system keeps the legs free from sand and water, and embedded silica gel mats provide traction for easy gripping. The legs are crafted of 10-layer carbon fiber and offer independent leg spread for easy leveling on uneven terrain. Combined with the center-column-free design, the leg spread allows the camera to be positioned virtually all the way down to floor level. The LP-324C provides a load capacity of 33 lb and a maximum height of 55", yet still folds to a compact 22.8" for travel and storage.

The low-profile Arca-type LELH40 ball head incorporates laser engraved panoramic and QR-plate positioning scales for precise and repeatable results and incorporates a bubble level for easy setup.

This lightweight, durable, and portable tripod and head combo is made for outdoor photographers who shoot seascapes, landscapes, and other locations where nature is at its compelling worst.

Corrosion-resistant titanium foot spikes, foot threads, and tube plugs
Waterproof and sand-proof twist-lock joints
10x-layer carbon fiber tripod
Lightweight center-column-free design
Triple set screw design prevents ball head from rotating on leg set
1/4"-20 mounting socket on leg spider for mounting accessory arm for monitor, mic, or other accessory
Removable ballast hook carabiner with 1/4"-20 mount
Low-profile Arca-type ball head with laser-engraved scales and bubble level
Bright blue color for high visibility

The ultra-compact Leofoto LH-25 ball head is the lightest and smallest tripod head in Leofoto's LH ball head series. It is perfect for those looking for the lightest and most compact headset possible, for example to take with them on trips. Despite its compactness and light weight of 178 grams, the LH-25 is very solid with a load capacity of 6 kilograms. This combination of light weight and sturdiness comes from the anodised aluminium that the head is made from.
Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto LH-25 Tripod Head with PU-25 Quick Release Plate
The ultra-compact Leofoto LH-25 ball head is the lightest and smallest tripod head in Leofoto's LH ball head series. It is perfect for those looking for the lightest and most compact headset possible, for example to take with them on trips. Despite its compactness and light weight of 178 grams, the LH-25 is very solid with a load capacity of 6 kilograms. This combination of light weight and sturdiness comes from the anodised aluminium that the head is made from.

User-friendly and compact ball head
The LH-25 ball head is easy and quick to use. The adjustment wing on the side of the head controls the horizontal adjustment of the entire head, which can rotate 360 degrees. The notch under the ball allows you to switch from landscape to portrait mode in no time! Simply pull the wing forward and adjust the position. The degree scale on the tripod plate allows the LH-25 to be positioned very precisely.

Arca-Swiss compatible tripod plate
Thanks to the professional and universal PU-25 Arca-Swiss quick-release plate, you can quickly attach your camera to the Leofoto LH-25 ballhead. You unscrew the clamp, slide the 25mm quick release plate into the holder and screw the clamp back on. Simple and very solid. Of course, this quick-release plate can also be exchanged with another universal Arca-Swiss compatible quick-release plate.

The LH-36 ball head is a standard feature on various Leofoto tripods, such as the LS-284C Ranger tripod from Leofoto, but is also available separately. This professional head is 360 degrees rotatable, tilts from portrait to landscape position and has a double panning function. It is also equipped with a spirit level and a universal 3/8" tripod screw to which you can attach almost any camera. The friction is adjustable via a convenient dial, which allows for more precise settings.
Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto LH-36 ball head with QP-70N quick release plate
The LH-36 ball head is a standard feature on various Leofoto tripods, such as the LS-284C Ranger tripod from Leofoto, but is also available separately. This professional head is 360 degrees rotatable, tilts from portrait to landscape position and has a double panning function. It is also equipped with a spirit level and a universal 3/8" tripod screw to which you can attach almost any camera. The friction is adjustable via a convenient dial, which allows for more precise settings.

Arca-Swiss compatible tripod plate
Thanks to the universal QP-70N Arca-Swiss quick-release plate, you can quickly attach your camera to the Leofoto LH-36 ballhead. You unscrew the clamp, slide the 70mm quick release plate into the holder and screw the clamp back on. Of course, this quick release plate can also be exchanged with another universal Arca-Swiss compatible quick release plate.

Specifications
Questions (0

The Leofoto LP-284C Poseidon Series Tripod + LH-30 Ballhead in Full Blue is a stunning carbon fiber tripod with ballhead system that stands out from the crowd. The bold, eye-catching color not only adds a touch of personality to your gear but also makes it easy to spot in a crowded setting.

It is designed for use in harsh, wet environments. Made with 10-layer carbon fiber leg tubes and titanium components, it provides excellent corrosion resistance and makes it suitable for use in a variety of conditions. The tripod also features twist-lock joints that repel water, sand, and debris, which helps to minimize the need for maintenance. The LP series tripod features a fixed, compact apex.

Waterproof and sand-proof design
Corrosion-resistant materials
Compact, center column-free design
Fixed apex with 3/8" mounting stud
Independent leg spread
Three Angle Stops: 23-, 55-, and 85°
1/4"-20 threaded Accessory Socket for Monitor, Microphone, LED light or More
Interchangeable Feet (3/8")
Interchangeable titanium foot spike
Carrying Case
10x carbon fiber leg tubes
*Leofoto LP/LA Series tripods are the same tripod with different colors

The included Leofoto LH-30 Low-Profile Ball Head (Blue) is lightweight aluminum and features an Arca-type compatible quick release system. A precisely-machined ball provides ultra-smooth movements and a large, ergonomically-designed locking knob, enables the movement of the ball head to be controlled. Laser-engraved scales on the panning base provide precise control during panorama shooting and dual drop notches provide the capability for rapidly changing from horizontal to vertical orientation.

Leofoto LP-284C Blue Tripod + LH-30 Blue Ballhead:

Max. height: 1290mm / 50.8 inches
Min. height: 160mm / 6.3 inches
Folded length: 540mm / 21.3 inches
Leg sections: 4
Max load: 10kg / 22 pounds
Weight: 1.55kg / 3.42 pounds

Leg tube sizes: 28/25/22/19MM

If you're looking for a lightweight alternative to the regular Arca-Swiss quick release on your Leofoto tripod, the Leofoto LR-50 lever clamp is a great choice. With this quick coupling with quick-release lever and NP-50 quick coupling plate, you can safely click your camera on and off the tripod in no time.

Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto LR-50 Quick Release Clamp with NP-50 quick release plate
If you're looking for a lightweight alternative to the regular Arca-Swiss quick release on your Leofoto tripod, the Leofoto LR-50 lever clamp is a great choice. With this quick coupling with quick-release lever and NP-50 quick coupling plate, you can safely click your camera on and off the tripod in no time.

Strong and lightweight quick coupling made of aircraft aluminum
The professional Leofoto LR-50 quick release is made of aircraft aluminum. This makes it featherlight in weight, but at the same time very strong. The quick coupler is milled from a single piece of light metal and hollowed out in some places to save even more weight. The weight of the LR-50 finally comes down to only 131 grams. Furthermore, the quick coupler measures 50 x 61 mm with a thickness of 22 mm. The LR-50 fits virtually all of Leofoto's tripod heads.

.
The LR-50 quick coupling comes with an NP-50 Arca-Swiss quick coupling plate that is 50 mm long, 44 mm wide and 10 mm thick. The plate weighs 38 grams. Using the 1/4 inch tripod screw, you attach it very easily and securely under your camera. With its length of 50 mm, your camera is then locked in the quick-release. Thanks to the lockable quick-release lever you can also quickly change your quick-release plate.

Millimeter scale and level are built-in
On the sides of the Leofoto LR-50 you will find a mm scale for very accurate mounting of your camera to a panorama head or macro rails. Thanks to the millimeter scale, very precise positioning of your camera is no problem at all. In addition, the Leofoto LR-50 also has a built-in level, so you can perfectly adjust your camera horizontally.

Key Features
Load Capacity: 33.1 lb
Maximum Height: 67.1"
Minimum Height: 6.7"
Folded Length: 22.4"
Leg Sections: 4
Weight: 4.2 lb
Twist Leg Locks
Arca-Type Compatible LH-40 Ball Head
Includes Quick Release Plate
The 4.2 lb LS-324C Ranger Series Tripod and LH-40 ball Head Kit from Leofoto is an all-purpose four-section support with twist leg locks that open, so you can extend the legs along with the rapid center column to a maximum height of 67.1". The tripod's minimum height is 6.7", which is ideal for macro or close-up photography, and the folded length is 22.4". The Arca-type compatible LH-40 ball head has a load capacity of 33.1 lb and includes a quick release plate.