Key Features

Load Capacity: 33.1 lb
Maximum Height: 67.1"
Minimum Height: 6.7"
Folded Length: 22.4"
Leg Sections: 4
Weight: 4.2 lb
Twist Leg Locks
Arca-Type Compatible LH-40 Ball Head
Includes Quick Release Plate
The 4.2 lb LS-324C Ranger Series Tripod and LH-40 ball Head Kit from Leofoto is an all-purpose four-section support with twist leg locks that open, so you can extend the legs along with the rapid center column to a maximum height of 67.1". The tripod's minimum height is 6.7", which is ideal for macro or close-up photography, and the folded length is 22.4". The Arca-type compatible LH-40 ball head has a load capacity of 33.1 lb and includes a quick release plate.

About this item
Leofoto MC-30 +MBH-19+PC-90 II Phone Outdoor Multipurpose Clamp Kit
leofoto MC-30 Phone Outdoor Multipurpose Clamp: Locking diameter: 31mm Mounting screw/hole: UNC 1/4" Weight: 72.5g Max. load: 2kg
MBH-19: Super Solid Micro Ball Head Max load: 2kg (4.4lbs) 1/4" Top & Bottom Thread
Leofoto PC-90 II Phone Holder Arca Stand Adjustable Locking Width Phone Clip

The wood-colored Leofoto MT-01 + LH-25 kit Wood consists of the Leofoto MT-01 mini tripod and the LH-25 tripod head. Both components of this tripod are finished in a light wood color for a high degree of unobtrusiveness when used in the field. This ultra-compact but at the same time extremely strong mini tripod offers maximum ease of use while still being able to handle a huge weight. This high-quality aluminum tripod combination weighs only 340 grams including ball head and can carry up to 6 kilograms. Nice all-round, super solid and yet compact to carry!

Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto MT-01 with LH-25 Mini table tripod kit Wood
The wood-colored Leofoto MT-01 + LH-25 kit Wood consists of the Leofoto MT-01 mini tripod and the LH-25 tripod head. Both components of this tripod are finished in a light wood color for a high degree of unobtrusiveness when used in the field. This ultra-compact but at the same time extremely strong mini tripod offers maximum ease of use while still being able to handle a huge weight. This high-quality aluminum tripod combination weighs only 340 grams including ball head and can carry up to 6 kilograms. Nice all-round, super solid and yet compact to carry!

Light and strong tripod
The Leofoto MT-01 mini tripod is made of high quality, hardened aircraft aluminum and has a black anodized body, ensuring a very strong yet light tripod. The minimum working height with tripod head is 114 centimeters and when folded, this mini tripod measures only 22 centimeters including the head, so it fits easily into any photo bag. The load capacity of the Leofoto MT-01 mini tripod without ball head is an impressive 6 kilograms if you fold out the legs completely and screw the camera directly onto the tripod using the 1/4-inch tripod screw. The tripod legs are finished with a wood-colored finish that allows the tripod to fully blend into its surroundings. The legs have rubber feet for maximum grip on any surface. This makes it a real little powerhouse suitable for use with a wide variety of camera/lens combinations.

Compact LH-25 tripod head
The ultra-compact but extremely strong Leofoto LH-25 ball head is included in the kit with the MT-01 mini tripod. This small ball head is only 6.9 centimeters high and made of black anodized aircraft aluminum for great durability. Thanks to the professional PU-25 Arca-Swiss quick-release plate, you can mount your camera on this tripod head in no time. With the adjustment wing on the side of the head you control the horizontal adjustment of the entire head, which can rotate 360 degrees. Thanks to the notch under the ball you can quickly switch from landscape to portrait mode! You do this simply by pulling the wing forward and adjusting the position. The load capacity of this tripod head is 6 kilos and the ballhead itself weighs just 172 grams.

Specifications
Questions (

The Leofoto NB-34 ball head with NP-50 quick release plate is a compact but solid tripod head for heavy duty work. The head is suitable for use on all Leofoto tripods and also for use on other brands of tripods with a 3/8-inch tripod screw.
Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto NB-34 Tripod Head with NP-50 Quick Release Plate
The Leofoto NB-34 ball head with NP-50 quick release plate is a compact but solid tripod head for heavy duty work. The head is suitable for use on all Leofoto tripods and also for use on other brands of tripods with a 3/8-inch tripod screw. This robust ball head has a ball diameter of 34 mm and the load capacity is 20 kilos.

Depthy but compact ball head
The solid but very compact Leofoto NB-34 ball head is made of black anodized aircraft aluminum for high strength at low weight and has a built-in level on the quick release. Thanks to the professional, 5-centimetre-long NP-50 Arca-Swiss quick-release plate, you can quickly fix your camera to the tripod. The height of the entire tripod head is 91 mm and the total weight is only 418 grams. The base diameter is 45mm and this, in combination with the large ball diameter of 34mm, ensures a high degree of stability. The ball is CNC machined from a solid block of aluminium and coated to make it super-smooth. The friction of the ball is separately adjustable by a large knob, and the ball of the NB-34 can tilt 90 degrees for vertical shooting.

Tripod head with double panning function
The special feature of the Leofoto NB-34 tripod head is the double panning capability. Both the base plate of this ball head and the camera plate with quick-release connection can each separately rotate 360 degrees. This offers advantages when you want to quickly rotate your camera without adjusting the base, as well as when you want to tilt the camera while the ball is in the air. The fine degree scale on both the base plate and the quick-release coupling allows you to adjust this ball head very precisely. The panning function of the top half is controlled by a quick-release lever and the base of the head is locked by a set screw. Thanks to the modular design of the NB-34, the quick coupling can be exchanged for another type.

The professional Leofoto NB-46 ball head with NP-60 quick release plate is a solid and high quality tripod head for the heavy work. The head is suitable for use on all Leofoto tripods and also for use on other brands of tripods with a 3/8-inch tripod screw. This robust ball head has a 46mm diameter ball and a load-bearing capacity of 30 kilos.
Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto NB-46 Tripod Head with NP-60 Quick Release Plate
The professional Leofoto NB-46 ball head with NP-60 quick release plate is a solid and high quality tripod head for the heavy work. The head is suitable for use on all Leofoto tripods and also for use on other brands of tripods with a 3/8-inch tripod screw. This robust ball head has a 46mm diameter ball and a load-bearing capacity of 30 kilos. The Leofoto NB-46 head comes with an NP-60 Arca-Swiss quick release plate.

Tripod head with panning function
The special feature of the Leofoto NB-46 is the double panning possibility. Both the base of this head and the camera plate with quick release can each independently rotate 360 degrees. This offers advantages if you want to quickly turn your camera without adjusting the base, but also if you want to tilt the camera while the ball is tilted. The fine degree scale on both the base plate and the quick-release coupling allows you to adjust this ball head very precisely. The panning function of the top half is controlled by a quick-release lever, and the base of the head is locked with a set screw.

Very solid ball head
This very solid ball head is made of black anodized aircraft aluminum for high strength at low weight and has a built-in level on the quick release. Thanks to the professional Arca-Swiss quick-release plate, you can mount your camera on the tripod in no time. The height of the entire tripod head is 10.5 cm and the total weight is 649 grams. The base diameter is 56 mm and this, in combination with the large ball diameter of no less than 46 mm, ensures a high degree of stability. The friction of the ball is separately adjustable by a large knob and the ball of the NB-46 can tilt 90 degrees for vertical shots. The quick coupling of the NB-46 is exchangeable for another type.

The Leofoto NP-400 is an Arca-Swiss lens rail with a length of 400mm. This multifunctional lens rail offers the possibility to mount an extensive camera set-up.

The Leofoto NR-200 universal accessory rail is CNC machined and made entirely of black anodized aircraft aluminum for high strength at a low weight. Leofoto has provided the NR-200 with V-shaped Arca-Swiss quick-release grooves.

The PC-190 iPad holder allows you to mount a tablet to the head of a tripod. The PC-190 has a ¼-inch screw hole at the bottom and is also Arca-Swiss compatible. The iPad holder is CNC machined and made of black anodised aircraft aluminium. This makes it extremely strong but lightweight.

With the PC-230 Tablet holder you can mount a tablet on the ball head of a tripod. At the bottom of the PC-230 it has a ¼-inch screw hole and the base of the holder is Arca-Swiss compatible. The iPad holder has a minimum width of 138mm and you can expand the space to a maximum of 230mm. With the grey turning wheel you can easily adjust the width. The PC-230 Tablet holder can carry up to 8 kg. It is suitable for the iPad Pro, for example. The tablet holder is CNC machined and made of black anodised aircraft aluminium. So he is enormously strong but remains lightweight.

PCL-60 PANNING CLAMPS
Only involve innovation in the our classic works, can we achieve sustainable development in this Era of survival of the fittest.

304 Stainless Steel
Hard Anodized
FASTER AND EASIER INSTALLING AND REMOVING

ARCA-SWISS STYLE

HOLLOW OUT DESIGN, WEIGHS ONLY 125G

Key Features
For 2.3 to 3.7" Wide Smartphones
2 x Fold-Out Legs for Tabletop Use
1 x 1/4" Threaded Tripod Connector
1 x Arca-Type Dovetail Connector
1 x Cold Shoe Mount
300° Phone Tilt
360° Phone Rotation
Integrated Tabletop Rubber Padded
Integrated Smartphone Holder Padding
Angled Phone Holder for Better Security
Maximizing your mobile device's mounting abilities, the Leofoto Tabletop & Tripod Folding Smartphone Holder can be used as a stand on a flat surface, or attached to a tripod or light stand via 1/4" female and Arca-type dovetail connections. When the base is swiveled out into a tabletop stand, two legs can pivot out in opposite directions to provide increased stability. Speaking of which, integrated rubber pads help to keep the stand steady on slick surfaces. In either configuration, the smartphone holder can tilt up to 300° and rotate 360°, letting you shoot images, record video, livestream, and chat in portrait, landscape, or anywhere in between.

Additional Features
Angled clamps help to hold your phone securely in the mount
Cold shoe for optional accessories, such as an external mic or LED light
Durable metal construction

The high-quality Leofoto RH-1L panning clamp with Arca-Swiss QP-70 quick release plate is a quick release clamp with panning capability that can be used as an alternative or replacement for the standard Arca-Swiss quick release clamp on various Leofoto tripod heads.
Leofoto RH-1L panning clamp with QP-70 quick release plate
The high-quality Leofoto RH-1L panning clamp with Arca-Swiss QP-70 quick release plate is a quick release clamp with panning capability that can be used as an alternative or replacement for the standard Arca-Swiss quick release clamp on various Leofoto tripod heads. The RH-1L allows very precise positioning of the camera for critical panorama work, and the dial locks the head in exactly the right place.

Interchangeable panning clamp quick release
The professional Leofoto RH-1L panning clamp is CNC machined from black anodized aircraft aluminum, making this clutch very strong yet lightweight. A standard Leofoto coupling can be easily exchanged for the RH-1L panning clamp by loosening the central Allen screw. The screw hole of the RH-1L is 3/8-inch and therefore universally usable for professional applications. The Leofoto RH-1L weighs only 78 grams without the quick release plate, its diameter is 52mm and its thickness is 18mm. Thanks to the built-in spirit level, you can easily level a tripod head when using the RH-1L.

Quick-action coupling with spirit level
The RH-1L has a screw-lock quick release that allows you to tighten the interchangeable QP-70 plate as much as you like, which is useful if you want to move the camera slightly on the tripod head. The professional, 7cm long and 38mm wide QP-70 Arca-Swiss Quick Release Plate allows you to mount your camera on this plate in no time. The 20mm wide clamps of the RH-1L release plate ensure maximum locking of the QP-70 release plate.

Key Features
Load Capacity: 8.8 lb
Max Height: 13.4"
Min Height: 4.5"
Folded Length: 9.5"
Leg Sections: 1
Weight: 15.2 oz
Removable, Extendable Center Column
Arca-Type Compatible Ball Head
Quick-Release Plate
Doubles as Handheld Pole
The red Sirui 3T-35R Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Key Features
Load Capacity: 22 lb
Maximum Height: 55.1"
Minimum Height: 10.2"
Folded Length: 14"
Leg Sections: 5
Weight: 2.7 lb
Aluminum Legs
180° Reverse-Folding Legs
Detachable Monopod Leg
Y-10 Ball Head
The A1005 Aluminum Tripod with Y-10 Ball Head from Sirui is a 5-section tripod that weighs 2.7 lb. The aluminum legs fold a full 180° in reverse to make it a compact 14". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.

The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

The 2.7 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
The aluminum legs have 5-sections and the legs fold in reverse to a compact 14"
Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1004K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1004K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1004K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Ball head included
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. Furthermore, it has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Best quality aluminum in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 2,0kg
- Max. Load capacity: 12kg
- Material: Aluminium

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. load capacity: 20kg - Packing size: 20kg Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1004K tripod/monopod Alu
1x SIRUI K-10X ball head Alu with interchangeable plate
3x metal spikes
1x carrying bag

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1204K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1204K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1204K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Including ball head K-10X
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. It also has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Carbon 8-layer in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 1.68kg
- Max. Load capacity: 12kg
- Material: Carbon

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1204K tripod/monopod carbon
1x SIRUI K-10X ball head aluminium with interchangeable plate
3x metal spikes
1x carrying bag

Key Features
Load Capacity: 22 lb
Height: 2.76"
Weight: 7.2 oz
Arca-Type Compatible
Safety-Lock Release Button
Anodized, Scratch-Resistant Aluminum
Portrait Notch for 90° Tilt
360° Rotation with Panning Lock
Includes TY-C10 Quick Release Plate
The black B-00 Series Mini Ball Head from Sirui is an Arca-type compatible, anodized aluminum head that weighs 7.2 oz and has a load capacity of 22 lb. The 2.76" tall ball head has a portrait notch on the side of the head that allows an attached camera to move in 90° angle for vertical shooting. At the base, a scale with index direction marks enables you to accurately move a camera in a 360° pan and lock into place with its independent panning lock. The ball head also includes the TY-C10 quick release plate, which can slide out by opening the head's clamp, but a safety-lock release button needs to be pressed to release the plate as well.

Key Features
Load Capacity: 6.6 lb
Maximum Height: 60.4"
Minimum Height: 8.6"
Folded Length: 20.2"
Leg Sections: 4
Aluminum-Constructed Legs
Flip Leg Lock System
Fluid System for Smooth Pans and Tilts
Spring-Assisted Counterbalance
TY-70A Quick-Release Plate
Gain the advantage of using the ET-2004 Aluminum Tripod with VA5 Video Head Kit from Sirui, where features from both the photo and video worlds combine into one tripod. With the quickness of the tripod's flip leg lock system and the compact size of the fluid head, you can be ready to go and capture video at a moment's notice.

Sirui VA-5 Ultra-Compact Video Head
The SIRUI VA-5 Ultra-Compact Video Head uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 6.6 lb. It features independent pan and tilt locks and uses an internal spring-assisted counterbalance mechanism for smoother tilt movements with heavier cameras. A TY-70A quick-release plate comes included, for forward/backward adjustment possible when attached to the head to help balance your camera. A dual safety lock system prevents the plate and your camera from falling off the head when the primary locking mechanism is loosened. To release the plate, simply press the secondary release button. To assist in horizontal alignment of your shots, the head has two bubble levels: one on the base of the head to align the tripod and one on the top of the head to align the camera. One pan handle comes included.

For DSLRs or compact video cameras up to 6.6 lb
Fluid system for smooth pan and tilts
Internal spring-loaded counterbalance mechanism
Quick-release plate with forward/backward adjustment
Dual safety lock system prevents plate from slipping off head
Two bubble levels: one at base of head, one a top of head
Accepts SIRUI TY-50/60/70/70-2 and LP-40/75 and many Arca-compatible quick release plates
Sirui ET-2004 Travel Aluminum Tripod
The ET-2004 Travel Aluminum Tripod from Sirui is a 4-section support with a flip leg lock system that you can disengage to give you the ability to extend the legs along with the standard rapid center column to a maximum height of 57.1". With its three variable leg angles and independent leg spread, the tripod's legs can conform to uneven terrain; splaying the tripod's legs out and switching the standard center column to the included short column, the support can go to a minimum height of 5.3". The legs fold in the reverse to a compact 16.9" to travel with the tripod, and the rubber feet on the legs prevent the tripod from sliding on smooth and flat surfaces. In addition, the feet retract back to reveal metal spikes to further stabilize the support on softer terrain.

Key Features
Knobs for Pan, Tilt & Tension
55 lb Load Capacity
Quick Release Plate
Arca-Type Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-20x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-type clamp for the included quick release plate. The pan, tilt, and quick release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation.

The interior ball locking of the K-20x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 55 lb. The quick release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-type platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-20x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-type quick release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
66 lb Load Capacity
QR Plate with Anti-Twist Rubber Mat
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-30x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation, and the quick-release plate has a rubberized surface that prevents camera twist when it's tilted 90°.

The interior ball locking of the K-30x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 66 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-30x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw