Brand Sirui
Color Black
Compatible Devices Camcorder, Cellphone, Camera
Special Feature Full-size, Compact, Adjustable-panning
Material Carbon Fiber
Weight Limit 6.61 Pounds
Maximum Height 62.6 Inches
Tripod Head Type Fluid Heads
Minimum Height 17.72 Inches
Number of leg sections 4
Carbon Fiber Construction - High quality carbon fiber video tripod, lightweight and sturdy. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 3kg/6.61lb. Tripod weighs only 2.8lbs/1.27kg (Without video head).
Adjustable and Extendable - 4 section Carbon Fiber legs with quick release twist-locks allow you to adjust the working height from 17.7" to 62.6" in seconds, while with a folded height of 18.5". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions.
2-in-1 Video Tripod and Monopod - 2 in 1 video camera tripod, it's functional design allows it to be used in video tripod, monopod or alpenstock mode to make your photography more diverse, you can converted into a full size monopod by screwing together the center column and the removable tripod leg. Its invertible central column also allows for super low shots and great Macro control.
VA-5 Ultra-Compact Fluid Video Head - The VA-5 Fluid Video Head weighing in at 1.3 lbs while holding up to 6.6 lbs. The VA-5 fluid head utilizes two bubble levels – one on the base of the head for tripod alignment and one on the top for camera alignment. An internal spring-assisted counter-balance provides for smooth 360° pans and +90°/-70° tilts.
Easy to Carry - Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 18.5" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel.

PERFECT FIT - Custom designed for both Fujifilm X-T5 Mirrorless Camera; Use a real Fujifilm XT5 camera as the model, the XT5 half case fits the X-T5 camera perfectly and will not affect the use of microphone, earphone, tripod and other external XT5 accessories
MATERIAL - This Fuji XT5 case is made of high quality Vintage PU Leather, the interior is suede. The soft interior layer and rugged construction will protect your XT5 camera from scratches, damages and dirt
MULTIFUNCTION - This Fuji X-T5 half case can enhance the protection of your XT5 camera. And it can be used as XT5 grip to increase the sense of grip when using your camera. Designed for efficient photography, you can access all XT5 peripheral ports, card slots, buttons, and connect with tripod
CONVENIENT TO USE - Special design make you freely to flip the XT5 camera screen and easy to install. There is a battery opening at the bottom, you don't need to take off the X-T5 half case when you change battery or SD Card. You also don’t need to take off the half case when you connect tripod or data line, avoiding frequent disassembly
STYLISH DESIGN - Vintage style never out of date, durable material and lightweight features make it suitable for travel and outdoor use. Whether you are a beginner or a experienced photographer, you will want these lightweight leather X-T5/XT5 half cases at your side

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-C Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Canon, FUJIFILM, Nikon, and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
CANON:
EOS M6
EOS 6D
EOS 5D Mark IV
EOS 5D Mark III
EOS 5D Mark II
EOS 5Ds
EOS 5Dsr
Rebel XT1 / 400D

FUJIFILM:
GFX 100S
GFX 50R
GFX 50S II
GFX 50 S
X-T30 II
X-Pro3
X-T3

NIKON:
Df
D750
D780
D850
D810
D810A
D800
D610
D500
D7500
D7200
D5600
D5300
D3500

SONY:
a7
a7R

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-S Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Nikon and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
SONY:
a1
a7 II
a7 III
a7M II
a7M III
a7R II
a7R III
a7R IV
a7S II
a9
a9 II
a6600
a6400
a6300

NIKON:
Z6 II
Z6
Z7 II
Z7
Zfc
Z5
Z50
D3400

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-SG Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Canon and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera, and features a cut-out slot to accommodate movement of the camera's flip-out LCD screen. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
CANON:
EOS R
EOS R5
EOS R6
EOS M50

SONY:
a7 IV
a7C
a7S III

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 63mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-63 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select Sony mirrorless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-63 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-63 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-63 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 63mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 63mm.

The Wizard W-63 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
a1
a9 II
a9
a7 IV
a7 III
a7 II
a7
a7R V
a7R IV
a7R III
a7R II
a7R
a7S III
a7S II
a7
a6600
a6500
a6400
a6300
a6100
a6000
FX3
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 72mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-73 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select mirroless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-73 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-73 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-73 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 72mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 72mm.

The Wizard W-73 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
Nikon:
Z7 II
Z7
Z6 II
Z6
Z5

FUJIFILM
X-H2S
X-T5
X-T4
X-T3
X-T2
X-H1

Panasonic
S5

Leica
SL 2
SL

Olympus / OM System
EM1
OM1
EM5 III
EM5 II
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Key Features
46" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 48" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 46" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

1/4″ and 3/8″ Screw. Motorized camera sliders with 1/4 “and 3/8” tapped holes can be mounted on a tripod or light stand to support multiple angles.

It can also be used on feet and height-adjustable floors.

Multi-target Switching

With 2 axes (horizontal, tilt, and rotation), you can easily switch shooting targets, and also make a smooth transition between these targets as the slider moves.

Multi-angle Shooting with High Load Capacity

The camera slider is compatible with light stands or camera tripods for shooting at different angles.

Moreover, it has a load capacity of up to 11 pounds, which makes horizontal and vertical shooting smoother.

Powered by AC adapter or NP F750 battery (not included). In time-lapse mode, the battery may last for nearly 10 hours
GVM 2D 2-Axis Wireless Carbon Fiber Motorized Slider

1x Motorized Slider

1 x Controller

x Battery

2 x Battery Charger

1 x Controller Connection Line

6 x Shutter Link

1 x Shutter Extension Line

1 x Carrying Bag

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
Dual-Handgrip Light with Phone Holder
For Vlogging and Tripod-Mount Setups
Vertical and Horizontal Attachment
Smartphone Photo Trigger on Handgrip
Powered by Included L-Series Battery
5600K Color Temperature with 97 CRI
0 to 99% Dimming
White and Orange Filters Included
2 x Cold Shoe Mounts; 1/4"-20 Threads
Optional DC Adapter Supported
The LT-10S Smartphone Video Camera Rig Light from GVM features a dual-handgrip design and includes an adjustable smartphone holder you can attach in the center. Mount virtually any smartphone in-between the two LED panels, which deliver either warm or cool white light thanks to two sets of filters. An included L-series battery neatly installs on the back and powers the light and a photo trigger on one of the handgrips.

Color 32"/80cm
Brand GVM Great Video Maker
Compatible Devices Camera, Cellphone
Item Dimensions LxWxH 38 x 24 x 12 inches
Item Weight 10 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
SUPPORT MULTIPLE SHOOTING MODES: Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point. Set A/B Points and Time-Lapse Keyframes: Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images.
1 TO 100% ADJUSTABLE SLIDING SPEED: The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode, In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
WIRELESS IOS/ANDROID APP CONTROL: Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion.
1/4"-20 AND 3/8"-16 TRIPOD MOUNT THREADS: The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. 1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
BELT DRIVEN WITH BATTERY-POWERED MOTOR: The motor is positioned on one end of the slider and features a L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras.

Key Features
For Content Creators and Vloggers
196 Lux at 3.3' (5600K)
Variable Color Temperature: 3200-5600K
Battery-Powered Operation
CRI/TLCI: 97+
Smartphone Photo Trigger on Handgrip
Eight FX Modes
HSI and CCT Modes
Two 1/4"-20 Mounting Threads
Two Cold Shoe Accessory Mounts
The TL15RS RGB Bi-Color Smartphone Video Camera Rig Light from GVM features a dual-handgrip and has an adjustable holder in the center to mount virtually any smartphone. The LEDs deliver a variable color temperature of 3200 to 5600K with 1 to 99% brightness dimming. An included battery neatly installs on the back and powers the light. A photo trigger on one of the handgrips works wirelessly over Bluetooth so you can take photos with your phone without taking your hands off the handgrips. Additionally, two shoe mounts allow you to attach accessories to the top, and 1/4"-20 threads let you mount the rig on a tripod or stand in vertical or horizontal setups.

Dual-handgrip and adjustable smartphone holder
Variable color temperature ranging from 3200 to 5600K
Green/magenta correction feature for color balancing with fluorescent lights
Adjustable hue, saturation, and light intensity
Eight FX modes for lightning, cop car, candle, TV, party, disco, bad bulb, and paparazzi
Rechargeable NP-F battery neatly installs on the rear and powers the light
Bluetooth compatible smartphone photo trigger on handgrip
Two shoe mounts to attach accessories
Optional DC power adapter

Key Features
Tripod-Mount Mobile Teleprompter
Supports up to 10.5" Tablets & Phones
iOS/Android Prompting App
Remote Control with Speed/Pause Controls
Compatible with Small & Mid-Size Cameras
The GVM Teleprompter TQ-M has a traditional tripod-mount prompter design and supports up to 10.5" tablets and smartphones. It includes an iOS/Android GVM prompting app and comes with a Bluetooth remote control that works with the app.

Although traditional, the design is compact and lightweight, consisting mainly of a slim base with a camera bracket on the rear and tablet holder on the front. A phone holder is included that can be installed instead of the tablet holder to support most smartphones. The colorless beamsplitter glass with multi-layer dielectric coating for light loss prevention is positioned in the middle with a hood to keep light out of your camera's lens. Virtually any small- or mid-sized camera with any lens diameter can be lined up behind the glass. The camera bracket can be rotated to support compact cameras on one side and larger ones on the other.

The camera bracket can also be moved forward and backward to properly line up your camera, and it's easily secured tool-free via a knob on the bottom. The tablet cradle on the front can similarly be adjusted forward and backward to line up different-sized tablets and phones to the beamsplitter glass. And the beamsplitter glass can be tilted forward and backward to your talent's needs to more clearly reflect the text from your mobile app.

The GVM app allows you to enter text and adjust font size, playback speed, and background color. The included remote control lets you adjust the scroll speed as well as start and pause scrolling remotely.

The main bracket features 1/4"-20 and 3/8"-16 threaded holes on the bottom for mounting compatibility with virtually all tripods, and included 1/4"-20 and 3/8"-16 thumbscrews secure your camera on top.

For easier transport, the prompter breaks down and the different components can be packed away more compact.

Key Features
Tripod-mount mobile teleprompter with tablet and smartphone holders; supports up to 10.5" tablets
Designed for small- to mid-sized cameras
iOS/Android GVM prompting app with adjustable font size, playback speed, and background color
Bluetooth remote control with scroll speed and scroll start/stop controls
1/4"-20 and 3/8"-16 tripod-mount threads
1/4"-20 and 3/8"-16 camera thumbscrews
Colorless beamsplitter glass with multi-layer dielectric coating ensuring no light loss
Base: 22 lb load capacity

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 82mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-82D Camera Positioning Bracket from NiSi is a rotating collar that attaches to select DSLR camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-82D is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-82D features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-82D features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 82mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 82mm.

The Wizard W-82D is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
DSLR cameras with lenses less than 82mm in diameter
Not compatible with large profile bodies or cameras using battery grips
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Store, transport, and protect photo gear under 40.9" long with the black CB-03 Light Stand and Tripod Carrying Bag from Godox. The bag features zipper closure, dual, connecting top strap handles, and nylon construction.

The Godox CB-17 Carrying Bag for AD1200 Pro Battery Powered Flash System from Godox is designed transport and store the AD1200 Pro Battery Powered Flash System set. The case can contain one AD1200 Pro flash head, one battery-powered base, and the related accessories. It features a folding handle and casters for easy transport, plus two exterior zippered pockets, and a pair of exterior straps for attaching a light stand or tripod.

A versatile addition to your setup whether you're shooting in the studio or in the field, the Dual Mount Arm from Godox features two side mounts and two top mounts. This bar mounts to your tripod and transforms it into a platform for attaching different accessories. One of the top mounts features a 1/4"-20 mount and the other provides a 3/8"-16 mount. Likewise, one of the side mounts features a 1/4"-20 mount and the other provides a 3/8"-16 mount. The tube slides back-and-forth to reposition the attached accessories and locks down with a ratchet lever. Additionally, the two top mounts lock down with their respective ratchet levers. With the two top mounts, you have the option of mounting a platform for your laptop computer, a tripod head, a microphone, an LED video light, and other photo and video accessories.