Load Capacity: 15kg
Ultra low profile design
Leg Sections: 4
Weight: 1.6kg
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-284 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.6kg
Max. load: 15kg
Minimum height: 150mm
Maximum height: 1270mm
Closed size: 530mm
Leg diameter 29.4mm – 18.6mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-284 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Key Features
Load Capacity: 11 lb
Max Height: 5.9', Min Height: 1.8'
Folded Height: 1.6'
Air Cushioned for Easy Adjustment
Reversed Folding Legs
Carbon Fiber Construction
This Carbon Fiber Air-Cushioned Light Stand from Sirui is a compact and versatile support that extends from 1.8' to a maximum height of 5.9'. The sturdy carbon fiber construction of the circular tubes provides a load capacity of 11 lb. The stand gets small enough to pack for location shoots due to its reverse-leg design that folds down to just 1.6'. You can even place it completely flat on the ground. Additionally, the air cushion allows easy and comfortable raising or lowering of your mounted light and different accessories. Its flip lock system allows quick setup and breakdown, while rubber feet give you extra stability. A standard 16mm spigot with a top 1/4"-20 screw is widely compatible with equipment and accessories.

Air-Cushioned
Protects equipment and fingers from segments closing too quickly
Rotatable Center Column
You can easily rotate the center column for practical beam angle adjustments
Compact Design
Reversible leg design for easy storage and portability
Lightweight
Durable yet lightweight at 2 lb

Key Features
Load Capacity: 18 lb
Max Height: 55"
Min Height: 5"
Folded Length: 16.5"
Leg Sections: 4
Weight: 3.6 lb
E-10 Ball Head with TY-50E QR Plate
Reverse-Folding Legs
Short Center Column Included
Custom Padded Case & Shoulder Strap
The ET-1004 Aluminum Tripod with E-10 Ball Head from Sirui is a 4-section aluminum tripod with an included ball head and quick release plate.

With the center column extended, the tripod's maximum height is 55" The tripod weighs 3.6 lb and can support up to 18 lb. An included short center column allows for changeover to shoot macro or from low angles. Also, the center column can be inverted to shoot from under the tripod.

The 4-section legs feature flip locks for easy adjustment and each leg can be independently placed at three position angles and automatically lock in place for secure shooting on uneven ground. The legs on the ET-1004 fold up 180º for compact storage and transport; its folded length is just 16.5". The tripod's rugged spider is made from forged aluminum alloy and the legs are made from economical aluminum alloy for stability, performance and longevity.

The E-10 ball head and a quick-release plate are supplied with the ET-1004 tripod . The ball head provides separate adjustment knobs for panning and locking, the locking knob is metal with a solid grip and wear-resistant surface. The E-10 ball head's locking mechanism can support up to 40 lb and is built to for smooth, vibration-free movement. A bubble-level is supplied for fast and accurate alignment.

SIRUI tripod for studio and large cameras - with center column and bag

The RX series tripods are the largest among the SIRUI tripods. With their high load capacity of 18 to 30kg, they are especially suitable for working in the studio and with large, heavy DSLR and video cameras.

The special feature of the R-2214X is the exchangeable mounting plate. It can be exchanged for the included 75mm adapter half-shell R2X-75A or the also included center column RX-402C. This way, for example, a SIRUI video head can be used on the tripod or the maximum working height can be increased by 38cm with the center column. To facilitate the change between plate and bowl or center column, an Allen key is integrated in the stabilizing hook.

The tubes of the legs are made of 10 layers of carbon, which makes the tripods extremely light but at the same time very stable. Depending on the surface, the non-slip rubber feet can be exchanged for robust stainless steel spikes (included).

- Carbon 10x carbon fiber in 4 sections
- incl. center column RX-402C and adapter half-shell R2X-75A
- center column reversible for ground level shooting
- mounting plate exchangeable against 75mm adapter half-shell or center column
- 3/8" screw for tripod heads, camera or camcorder
- Built-in leveling bubble in the tripod shoulder
- Fixation screw for tripod head
- Easy-action twist locks - half a turn is enough to loosen
- Protective handles for a secure grip in cold and heat
- Stabilizing hook with integrated Allen key

- Weight: 1,6kg (with center column 1,95kg)
- Max. Load Capacity: 18kg
- Height: 11.5 - 145cm (183cm with centre column)
- Pack Size: 51cm (with centre column 59cm)
- Tube Diameter: 18,6 - 29,4mm

Compatibility
Cameras, camcorders, tripod heads with 3/8" thread
SIRUI RX-75B levelling hemisphere

Included indelivery
1x SIRUI R-2214X tripod carbon
1x R2X-75A adapter hemisphere ø75mm
1x mounting plate ø63mm
1x RX-402C center column
3x stainless steel spike
1x carrying bag with strap
*Video head, levelling hemisphere not included in delivery

Technical data Softbox
- 16 struts
- Diameter: 101 cm
- Depth: 43.5 cm
- Pack size: Height 65 cm / Diameter: 18 cm
- Weight (with grid and diffuser fabrics): 1800 g

Compatibility
SIRUI C-Series LED Continuous Lights
Flashes or continuous lights with Bowens S-Type bayonet

Scope of delivery
1x SIRUI RGX105 softbox 101cm
1x front diffuser
1x inner diffuser
1x grid
1x softbox bag
*flashgun, continuous light & tripod not included.

- 16 struts
- Diameter: 60 cm
- Depth: 30 cm
- Pack size: Height 42.5 cm / Diameter: 18 cm
- Weight (with grid and diffuser fabrics): 1100 g

Compatibility
SIRUI C-Series LED continuous lights
Flashes or continuous lights with Bowens S-Type bayonet

Scope of delivery
1x SIRUI RGX60 softbox 60cm
1x front diffuser
1x inner diffuser
1x grid
1x softbox bag
*flashgun, continuous light & tripod not included.

Key Features
18 to 29" Length Adjustment
360° Full Color RGB Mode
14 Built-In Special Effects
Music Mode: Reacts to Music or Sound
2500-8000K Color Temperature / 97 CRI
iOS/Android App & 2.4GHz Remote Control
Mounting Ring & 1/4"-20 Mounting Thread
Mini Tripod Included
Memory Function for Saving Settings
Integrated 2-Hour Battery
Not only a tube light but a telescopically adjustable one, the T60 Telescopic RGB LED Video Light from Sirui is highly portable and easily suitable for a wide range of applications. It telescopically adjusts from 18 to 29" in length. A 1/4"-20 thread on the bottom lets you mount the light on an included mini tripod or various other supports. On the opposite end is a pull-out ring for hanging the light on a hook or something similar. You can also use the light handheld.

Three operating modes and a companion iOS/Android app together allow you to simulate numerous lighting effects. Using the app, you can control all functions of the light from a distance. A 2.4GHz wireless remote control is also included. It comes attached to the grip handle of the light and is removable and works from up to 49' away. You can use it to control multiple units by assigning them to specified groups.

The color temperature is adjustable from a warm 2500K to a cool white 8000K, and color accuracy is up to 97 CRI/TLCI. The three operating modes are 360° full color RGB mode, effects mode, and music mode. Color mode lets you select any color from the color spectrum and adjust saturation and brightness. Effects mode offers 14 built-in special effects, such as flash, laser, candle, and fireworks. In music mode, the light reacts to music or sound, useful for music videos and other purposes. There's a pickup hole on the bottom of the light for this purpose.

The light features a memory function where you can save up to 20 dialed-in settings so that you can access them directly the next time around. The T60 is powered by an internal lithium-ion battery that runs up to two hours at full power. A charging adapter is included for recharging it in approximately 1.5 hours.

The T60 uses SMD RGB LEDs. Also, it's designed to ensure consistent light output with no flicker.

Key Features
75mm Anamorphic Fuji X Mount Cine Lens
f/1.8 Maximum Aperture, 13-Blade Iris
Robust Aluminum Lens for APS-C Cameras
2.4:1 Aspect Ratio; 13-Blade Iris
1.33x Cinematic Anamorphic Squeeze
Schott Glass with Nano Coatings
Distance Markings in Feet and Meters
Horizontal Blue Streaks, Oval Bokeh
Manual Focus, M67 Filter Size
Capture cinematic widescreen images when using a cine camera with an APS-C sensor size with this 75mm f/1.8 1.33x Anamorphic Lens from Sirui. The lens features a Fuji X mount and captures a widescreen 1.33x anamorphic image squeeze with an ultra-wide 2:4:1 aspect ratio when used with an APS-C sensor size. This design gives you a 33% increase in the horizontal field of view for a beautiful cinematic widescreen look.

This 75mm manual-focus lens is designed with a durable housing and features optics with protective lens coatings, 16 elements in 12 groups, a 13-blade iris, a minimum focus distance of 3.9', and a fast f/1.8 maximum aperture. It can also produce horizontal blue streaks with less stray light and has a soft, oval bokeh with a shallow depth of field while maintaining a sharp focus. You can utilize 67mm filters on the front of the lens, and it features distance markings in both feet and meters.

Key Features
Robust lens with advanced optics for cameras with an APS-C sensor
Anamorphic 2.4:1 format in a 16:9 frame after de-squeeze
Horizontal blue streaks with less stray light
Soft, oval bokeh with a shallow depth of field
13-blade iris
3.9' minimum focusing distance
67mm filter thread
Magnification: 1:14.47 (V), 1:18.45 (H)
Manual focus
Optical design features 16 elements in 12 groups
Distance markings in feet and meters

Sirui ST-224 Waterproof Carbon Fiber Tripod with ST-20 Ball Head

Load Capacity: 15kg
Leg Sections: 4
Weight: 1.9kg
Ultra Low profile design
Triangle Center Column
Integrated Stainless Steel Spikes and Rubber Feet
ST-20 Ball Head

Knobs for Pan, Tilt & Tension
Panning clamp
550 grams
Aluminium knobs for added durability
35 kg Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui ST-224 Waterproof Carbon Fibre Tripod with ST-20 Ball Head is protected from water, dirt and dust. In addition, it has a newly designed locking mechanism for comfortable operation and a spirit level for accurate alignment. The tripod tubes are manufactured from 8-layer carbon fibre (reduced weight, increased stability, vibration-free). The centre column is made in a triangle shape to enhance rigidity and also allows for the profile of the tripod to be extremely low profile when folded. The legs have three ratchet positions to allow for different angles and extension. The tripod measures just 48cm when collapsed. Each leg is made of 4 sections with 3 sealed twist locks. Rubber feet and metal spikes ensure that the tripod is stable on any surface.

A stabilising hook on the centre column is a SIRUI standard and a transport bag. The bag strap can also be used as a tripod strap.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.9kg
– Max. load: 15kg
– Tripod height: 520mm – 1840mm
– Closed size: 610mm

Included
1x SIRUI ST-224 waterproof tripod carbon fibre
1x ST-20 Ball head with QR plate
1x Transport bag with strap



The Sirui ST-20 Ball Head are designed and built to the highest standards. The ST-20 ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 40mm
– Weight: 0.55kg
– Height: 90mm
– Load Capacity: 35kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Key Features
Load Capacity: 11 lb
Maximum Height: 55.1"
Minimum Height: 5.5"
Folded Length: 15.7"
Leg Sections: 4
Weight: 2.2 lb
Compact 180° Folding Legs
Anodized Aluminum Construction
Split and Reversible Center Column
Includes Arca-Type B-00 Ball Head
The black T-004SK Aluminum Tripod with B-00 Ball Head from Sirui is a 4-section support with anodized aluminum legs with magnesium leg sockets. Unlocking the twist locks with a simple turn enables you to extend the legs; with the rapid center column extended, you can achieve a maximum height of 55.1". With three variable leg angles, the legs splay out completely, and splitting the center column to a shorter half allows the tripod to sit at a minimum height of 5.5". Positioning the tripod back to a normal stance, you can reverse the column and now have your camera literally facing the ground. The tripod is capable of supporting camera gear weighing up to 11 lb. To store or carry the 2.2 lb tripod, the legs fold 180° to a compact 15.7". The B-00 Arca-type compatible head is included with the tripod.

Perfect Travel Tripod
Reverse-Folding Legs
Removable Center Column for Low-Angles
Arca-Type Compatible QR Plate
Includes Soft Case and Tools
Weighs only 1kg
The Sirui Traveler 5A Aluminium Tripod with 3T-35 Ball Head – small and compact, yet extremely stable.

This high-quality travel tripod from SIRUI offer secure support for your compact or system camera despite its compact design. It is easy to handle in any situation and can be packed into any bag. The legs can be folded up by 180° meaning that the tripod can be collapsed to a height of just 33cm. Each leg is made of 5 sections with 4 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces. Cold-weather grips are a SIRUI standard offering control in cold weather environments. The Traveler 5 Series features a removable centre column. The head can also be mounted directly onto the tripod shoulder, increasing stability. For additional stability, there is a small keyring with a carabiner underneath the tripod shoulders so you can mount additional weight.

Tripod specifications (Including Head)
• Material: Aluminium
• Extendible and removable centre column
• Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
• Legs fold up by 180°
• Sealed twist locks for secure support
• Carabiner for stabilising and cold weather grips
• Max. load: 4kg
• Height range – 15.5cm – 138cm
• Closed size: 33cm
• Tube diameter: 10 – 22mm
• Weight: 1kg
– Colour: black

Ball head specifications
– Material: Aluminium
– 360° panorama function – infinitely variable friction control
– Rubber release plate – size: 30x38mm
– Release plate with 1/4″ stainless steel screw – head with 3/8″ thread
– Safety Lock System – prevents the plate from accidentally slipping
– Vertical slot
– Max. load: 4kg
– Height: 70mm
– Base plate: ø37mm
– Weight: 172g (including plate)
– Colour: black

Included
1x SIRUI Traveler 5A tripod aluminium black
1x SIRUI 3T-35K ball head black
1x SIRUI TY-C10 release plate black
1x Transport case

This high-quality travel tripod from SIRUI offers secure support for your compact or system camera despite its compact design. It is easy to handle in any situation and fits packed into any bag.

The legs can be swivelled upwards by 180°, so that the tripod is just 33cm high when folded (with head). Each leg consists of 5 sections with 4 sealed ring locks. The rubber feet allow the tripod to stand securely on any surface.

The cold protection handles are also part of the SIRUI standard, as well as the practical carrying bag.

The tripod offers a removable and extendable center column. The head can therefore be placed directly on the tripod cross, which significantly increases stability. For additional stabilization, there is a small key ring with a carabiner at the bottom of the tripod cross.

The ball head B-00K works very smoothly and softly. The Safety Lock System with Security Pin, which secures the quick release plate and releases it at the push of a button. It is no longer necessary to open the whole clamp. The base can be rotated 360°, ideal for panoramic shots.



Features
- Best quality aluminium
- Extendable and removable center column
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Legs can be folded upwards by 180°
- Semi-automatic leg angle adjustment
- Sealed twist locks for a firm hold
- Carabiner for stabilization
- Cold protection handles made of foam rubber
- 360° panorama function
- Rubberized interchangeable plate - Dimensions: 30x38mm
- Interchangeable plate with 1/4" stainless steel screw
- Tripod connection 3/8" female thread
- Safety Lock System - prevents plate from slipping
- 90° portrait notch

Technical data tripod with ball head
- Leg sections: 5
- Min. height without center column: 160mm
- Max. height with center column: 1380mm Height with center column: 1380mm
- Pack size: 330mm
- Tube diameter: 10 - 22mm
- Weight: 1,05kg
- Max. Max. load: 4kg
- Material: Aluminium
- Colour: black

Technical data ball head
- Height: 73mm
- Base diameter: 42mm
- Weight: 215g
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: Aluminium
- Colour: black

Scope of delivery
1x SIRUI Traveler 5AX tripod aluminium black
1x SIRUI B-00K ball head aluminium with interchangeable plate
1x SIRUI TY-C10 quick release plate
1x carrying case

Brand Sirui
Color Traveler 5
Compatible Devices Camera
Material Carbon Fiber
Item Weight 1.87 Pounds
Weight Limit 8.8 Pounds
Maximum Height 54.3 Inches
Tripod Head Type Ball Heads
Number of leg sections 5
Solid Construction: High quality carbon fiber camera tripod, construction for maximum lightness and sturdiness. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 8.8lbs/4kg. Tripod weighs only 1.87lbs/0.85kg.
Adjustable and Extendable: 5-section carbon fiber legs with quick release twist-locks allow you to adjust the working height from 6.3" to 54.3" in seconds, while with a folded height of 13". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions.
Aluminum Ball-Head: With two independent control knobs, the ball-head can rotate smoothly and tilt vertically to take panoramic and portrait shots. A quick release plate with standard 1/4" screw is equipped for a fast camera connection.
Multi-angle Shooting: The center column inverted function ensures extreme low angle photography and macro shooting. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights.
Easy to carry: Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 13" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel.

SIRUI Traveler 7A - Tripod / Monopod aluminium with ball head

All-round tripod with ball head
Those looking for a compact all-round tripod will be happy with the SIRUI Traveler 7. With its powerful ball head and integrated monopod, this small tripod offers everything a photographer needs. Whether in the bustling big city, exploring exciting landscapes, travelling or in the studio at home, the Traveler 7 is always at your side. And the 46.5 cm packing size turns into a tripod up to 171 cm tall.

Turn a tripod into a monopod
One leg of the tripod can be removed and used as a standalone monopod. This feature turns the Traveler 7 into a 2in1 tripod that lets you handle any situation. If that is not enough, the monopod with the centre column can even be extended to an incredible 174.5 cm working height (with head).

If you prefer it low, you can also mount the centre column upside down. Your camera has never been closer to the ground!

Stability and intuitive operation
With its non-slip rubber feet and the metal spikes included in the delivery, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be released and locked again in no time at all using the twist locks (ring locks). Thanks to the soft sponge rubber grips you always have your tripod safely under control. In winter they also serve as protection against the cold.

Compact packing size
The proven 180° flip-over function of the legs also makes this SIRUI tripod a true packing miracle. The Traveler 7 measures just 46.5 cm when packed. The ball head is completely enclosed.

Including ball head in black
It is equipped with the Safety Lock System to prevent the removable plate from accidentally slipping off. It also has a levelling level and a 360° panorama scale. It is compatible with the Arca Swiss System.

Features
- Monopod integrated
- Aluminium best quality in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Centre column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilising hooks and cold protection handles

Technical Data Tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. height with centre column: 1710mm
- Height of monopod: 500-1745mm
- Packing size: 465mm
- Tube diameter: 15 - 25,8mm
- Weight: 1,93kg
- Max. Load capacity: 8kg
- Material: aluminium

Technical data ball head
- Weight: 0,28kg
- Height: 88mm
- Ball diameter: 29mm
- Base diameter: 43mm
- Levelling level and safety pin
- Incl. exchangeable plate (Arca Swiss compatible)
- Material: aluminium


Scope of delivery
1x SIRUI Traveler 7A tripod/ monopod aluminium
1x SIRUI ball head aluminium with interchangeable plate
3x metal spikes
1x transport bag

Brand Sirui
Color Black
Compatible Devices Camcorder, Camera, Smartphone
Special Feature Full-size, Adjustable-panning, Compact
Material Carbon Fiber
Item Weight 1.57 Kilograms
Weight Limit 17.6 Pounds
Maximum Height 66.55 Inches
Tripod Head Type Ball Heads
Minimum Height 18.9 Inches
Solid Construction - High quality carbon fiber camera tripod, construction for maximum lightness and sturdiness. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 17.6 lbs/8kg. Tripod weighs only 3.46lbs/1.57kg.
Adjustable and Extendable - 4 section carbon fiber legs with quick release twist-locks allow you to adjust the working height from 18.9" to 65.55" in seconds, while with a folded height of 18.9". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions.
2 in 1 Tripod and Monopod - Compact tripod, it's functional design allows it to be used in tripod, monopod or walking stick mode to make your photography more diverse, you can converted into a full size monopod by screwing together the center column and the removable tripod leg. Its invertible central column also allows for super low shots and great Macro control.
360 Degree Ball-Head and Panoramic View - With two independent control knobs, the specially designed ball-head can rotate 360° allows you to take photos at any angle in horizontal and vertical directions, making it easy to take panoramic photos and video shooting. Quick release plate with standard 1/4" screw for fast camera connection, compatible with almost all DSLR such as Canon, Nikon, Sony, Olympus, Fujifilm, Pentax and more.
Easy to carry - Lightweight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 18.9" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel.

Brand Sirui
Color Black
Compatible Devices Camcorder, Cellphone, Camera
Special Feature Full-size, Compact, Adjustable-panning
Material Carbon Fiber
Weight Limit 6.61 Pounds
Maximum Height 62.6 Inches
Tripod Head Type Fluid Heads
Minimum Height 17.72 Inches
Number of leg sections 4
Carbon Fiber Construction - High quality carbon fiber video tripod, lightweight and sturdy. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 3kg/6.61lb. Tripod weighs only 2.8lbs/1.27kg (Without video head).
Adjustable and Extendable - 4 section Carbon Fiber legs with quick release twist-locks allow you to adjust the working height from 17.7" to 62.6" in seconds, while with a folded height of 18.5". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions.
2-in-1 Video Tripod and Monopod - 2 in 1 video camera tripod, it's functional design allows it to be used in video tripod, monopod or alpenstock mode to make your photography more diverse, you can converted into a full size monopod by screwing together the center column and the removable tripod leg. Its invertible central column also allows for super low shots and great Macro control.
VA-5 Ultra-Compact Fluid Video Head - The VA-5 Fluid Video Head weighing in at 1.3 lbs while holding up to 6.6 lbs. The VA-5 fluid head utilizes two bubble levels – one on the base of the head for tripod alignment and one on the top for camera alignment. An internal spring-assisted counter-balance provides for smooth 360° pans and +90°/-70° tilts.
Easy to Carry - Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 18.5" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel.

【Wide Compatibility】Sametop chest harness and head strap fit all Go Pro Hero11, Hero10, Hero9, Hero8, Hero7, Hero6, Hero5, Hero4, Session, Hero3+, Hero3, Hero2, Hero1, Hero (2018), Fusion, Max and most action cameras.
【Multi Purpose】Suitable for mountain biking, skiing, snowboarding, motocross, paddle sports, cliff diving wake boarding and other action sports.
【Immersive View】The Head mount and chesty give you an immersive view of your activity and a better perspective.
【Easy to Share】Easy to share the POV filming with your friends or others.
【Fully Adjustable】Comfortable, fully adjustable to fit a wide range of adult sizes, 2 years authentic guarantee.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 63mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-63 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select Sony mirrorless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-63 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-63 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-63 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 63mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 63mm.

The Wizard W-63 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
a1
a9 II
a9
a7 IV
a7 III
a7 II
a7
a7R V
a7R IV
a7R III
a7R II
a7R
a7S III
a7S II
a7
a6600
a6500
a6400
a6300
a6100
a6000
FX3
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 72mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-73 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select mirroless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-73 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-73 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-73 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 72mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 72mm.

The Wizard W-73 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
Nikon:
Z7 II
Z7
Z6 II
Z6
Z5

FUJIFILM
X-H2S
X-T5
X-T4
X-T3
X-T2
X-H1

Panasonic
S5

Leica
SL 2
SL

Olympus / OM System
EM1
OM1
EM5 III
EM5 II
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Key Features
Maximum Resolution: 2400 x 1200 dpi
Maximum Print Width: 24"
LUCIA PRO Ink System
Intelligent Media Loading
4.3" Color LCD touchscreen
Built-In USB Port for Direct Printing
500GB Hard Drive
Sub-Ink Tank System
L-COA PRO Control Engine
USB & Wi-Fi Connectivity
Designed for professional photographers and graphic designers, the imagePROGRAF Pro-2100 Printer from Canon provides you with stunning, black-and-white prints with deep blacks, detailed gradations, and a wide color gamut that accurately reproduces the most difficult colors. Featuring a PF-10 print head providing a max resolution of 2400 x 1200 dpi, the printer utilizes a 1.28" wide print head with 18,432 nozzles equipped with anti-clogging FINE technology. The Pro-2100 also makes use of the LUCIA PRO 11-Color plus Chroma Optimizer ink system to provide incredibly accurate color reproduction, outstanding image clarity, and enhanced detail in darker areas. A built-in multi-sensor ensures color consistency from one print to the next, and with the included Device Management Console Software, you can calibrate and monitor up to 50 PRO Series printers.

For media handling, the Pro-2100 offers intelligent media loading. Set the roll holder in the printer, and the printer automatically feeds the media into the printer. The built-in multi-sensor measures the surface reflection and the media thickness to determine the media type. A sub-ink tank system removes all the ink in the tank before having to replace it, helping to eliminate any wasted ink, and the empty tanks can also be replaced without stopping the printer. Additionally, matte black and photo black inks have their own dedicated nozzles, so no switching is necessary when printing with different media types such as glossy and fine-art papers.

A 4.3" color LCD touchscreen offers smartphone-like usability, and the three most used commands — load, feed, and cut — have their own buttons below the operation panel for quick and easy access. A built-in USB port enables direct printing of PDF and JPEG files without the need for a computer, and a built-in 500GB hard drive increases productivity by relieving workload from the host Mac or Windows computer.

PF-10 print head provides professional grade printing with a maximum resolution of 2400 x 1200 dpi
Large 1.28" wide print head with 18,432 nozzles equipped with anti-clogging FINE technology
LUCIA PRO 11-Color plus Chroma Optimizer ink system provides incredibly accurate color reproduction, outstanding image clarity, and enhanced detail in darker areas
A built-in multi-sensor ensures color consistency from one print to the next
Device Management Console Software for calibrating and monitoring up to 50 PRO Series printers
Intelligent media holding automatically feeds rolled media into the printer and a built-in sensor measures the surface reflection and the media thickness to determine the media type
Sub-ink tank system removes all the ink in the tank before having to replace it, eliminating any wasted ink
Empty tanks can be replaced without stopping the printer
L-COA PRO control engine performs high-speed processing of image data, generates printing data, and controls the optimal ink layout for creating high-resolution prints
Multipositional basket can be freely adjusted to enable various output positions
4.3" color LCD touchscreen offers smartphone-like usability
Built-in USB port enables direct printing of PDF and JPEG files without the need for a computer
500GB hard drive increases productivity by relieving workload from the host Mac or Windows computer
Wireless connectivity via working network with wireless 802.11b/g or 802.11n capability.