Key Features
Covers Super 35 Format
Fuji X-Mount with Electrical Contacts
Consistent T2.9 Aperture Over Zoom Range
3 x Standard 0.8 MOD Gears
Clickless 9-Blade Iris
200° Focus Rotation and Macro Mode
Color Matched to Fujinon HK/ZK/XK Series
85mm Front Outside Diameter
Weighs 2.16 Pounds
Flange Focal Distance Adjustment
The Fujinon MKX18-55mm T2.9 Lens in X-Mount is a lightweight cine-style zoom lens for X-mount cameras with a Super 35mm-sized sensor. The electrical contacts within the lens mounts allows communication with X-series cameras. It features a mechanical design with three independent lens control rings: focus, iris, and zoom. Each ring incorporates a cine-style gear with a 0.8 MOD for interfacing with standard cine -style lens accessories. The focus ring features approximately 200° of rotation, which provides room for precise focus pulls, and the iris is clickless, enabling smooth iris pulls. The lens also incorporates a macro mode for close focusing capabilities.

The lens is color matched to other Fujinon lenses such as the HK, ZK, and XK series, which enables smooth intercutting between lenses. The 85mm front enables use with many cine-style matte boxes via use of optional step-up rings (rings not included). The lens weighs only 2.16 pounds, which is fairly light for a cinema zoom that holds focus and aperture throughout the focal length range. It is designed for cameras with a Fuji X-mount, so it has a short flange focal distance, but the lens allows for flange focal distance adjustment so you can fine-tune it to the camera you are using the lens on.

The electical contacts within the lens mount enables communication with X-series cameras, which allows for correction of distortion and color/brightness shading to prevent vignetting. This communication also enables you to achieve a variety of color expressions when using Film Simulation modes.
T2.9 to T22 aperture with 9 iris blades for attractive bokeh
The 28.5mm diameter image circle covers the 3-perf super 35 format with a 16:9 aspect ratio
Industry standard 0.8 film pitch gears for focus, zoom, and iris control
The gear rings positions for focus, zoom, and iris are located at the same position on both lenses in the MKX series, making switching between the two zooms quick as you don't have to adjust the position of lens accessories
Both lenses in the MKX series have the same weight and length so there is no need to rebalance your camera when you change from one lens to the other
200° focus barrel rotation
No shims are required to adjust the flange focal distance as this lens has a built-in adjustment mechanism
Macro focus function available.

Key Features
X-Mount Lens/APS-C Format
27-183mm (35mm Equivalent)
Aperture Control from Camera
Stepless Control from Select Cameras
Aperture Range: f/4 to f/22
Power Zoom Mechanism; Internal Zoom
Aspherical and ED Elements
Linear Autofocus Motor
Weather-Sealed & Front Fluorine Coating
Rounded 7-Blade Diaphragm
A standard zoom purpose-built for content creators and image-makers with a penchant for motion, the FUJIFILM XF 18-120mm f/4 LM PZ WR covers a versatile focal length range and features an inspired design for intuitive control over zoom, focus, and aperture adjustment from the camera body. This zoom is the first X Series lens built in collaboration with FUJINON cine and broadcast lens designers and is a go-to all-around lens choice for video and motion applications.
Designed for Motion
Featuring variable power zoom and smooth manual focus, and supporting stepless aperture control from select cameras, this 18-120mm enables precise, fine control over focus and exposure. Cameras already confirmed to be able to perform stepless aperture control for this lens include the FUJIFILM X-H2S, X-T4, X-T3, and X-S10.
Power zoom can easily and smoothly transition throughout the focal length range. This mechanism can be controlled by a newly designed zoom lever, which offers variable zoom speeds.
Conventional focus ring allows direct and intuitive manual focus control and the lens offers seamless switching between continuous autofocus and manual focus. Requiring a camera firmware update, this unique control method opens up the possibilities for making creative focus transitions and control the focal point whenever required.
Two custom function buttons can be used to preset a constant zoom speed, focal length, or focus point.
Flexible Zoom and Advanced Optics
Spanning a useful wide-angle to mid-telephoto range, this zoom offers a 27-183mm equivalent focal length range to serve as a viable single lens solution for everyday shooting.
Constant f/4 maximum aperture offers consistent illumination throughout the zoom range, which pairs well with the constant nature of the focusing, AF, and zoom controls.
Three aspherical elements control distortions and spherical aberrations in order to produce sharper imagery with more accurate rendering.
Three extra-low dispersion elements greatly reduce chromatic aberrations and color fringing throughout the zoom range for a high degree of clarity and color accuracy.
Rounded seven-blade diaphragm contributes to a smooth, circular bokeh quality when using shallow depth of field and selective focus effects.
Intuitive Handling and Robust Construction
Benefitting its use on gimbal stabilization devices, this lens's internal zoom and internal focusing design helps to maintain consistent balance and overall lens length during use.
Despite the inclusion of a power zoom mechanism and a broad focal length range, this lens still weighs in at just about 1 lb, making for a lightweight design that helps maintain compatibility with a variety of stabilization tools.
Weather-resistant design protects against dust and moisture and cold temperatures down to 14°F.
Front fluorine coating protects against water, grease, dirt, and smudging, and also makes it easier to clean the front element.

Key Features
X-Mount Lens/APS-C Format
27-206mm (35mm Equivalent)
Aperture Range: f/3.5 to f/22
Two Extra-Low Dispersion Elements
Four Aspherical Elements
HT-EBC Coating
Linear Autofocus Motor
Optical Image Stabilization
Weather-Sealed Construction
Rounded 7-Blade Diaphragm
An ideal all-around lens, the FUJIFILM XF 18-135mm f/3.5-5.6 R LM OIS WR is a versatile 27-206mm-equivalent zoom, covering wide-angle to medium telephoto fields of view. Well-suited for travel and walkaround shooting, the expansive reach of this lens is further complemented by a sophisticated optical design, which uses ED and aspherical elements, to produce high color accuracy, sharpness, and image clarity. An HT-EBC coating also improves contrast and color neutrality by reducing flare and ghosting when working in strong lighting conditions. Also benefitting use in a variety of situations, a linear motor delivers quick and quiet autofocus performance and a five stop-effective image stabilization system minimizes the appearance of camera shake. Additionally, the lens is fully weather-sealed for working in inclement conditions.

All-in-one zoom is designed for APS-C-format Fujifilm X-mount mirrorless cameras and offers a 27-206mm equivalent focal length range.
Two extra-low dispersion elements are used to greatly reduce color fringing and chromatic aberrations in order to produce high clarity and color fidelity throughout the zoom range.
Four aspherical elements control distortion and spherical aberrations, which helps to improve sharpness and realize more accurate rendering.
An HT-EBC (High Transmittance Electron Beam Coating) coating has been applied to the entire surface of each element to for controlling ghosting and flare for greater contrast and color accuracy.
A linear motor autofocus system, coupled with an internal focusing design, delivers smooth, near-silent performance that is especially beneficial to video applications and when working in noise-sensitive areas.
Complemented by an enhanced gyro sensor and unique series of algorithms, the optical stabilization system minimizes the appearance of camera shake by up to five stops to enable sharper imaging when working with longer focal lengths or slower shutter speeds.
The lens body incorporates 20 distinct weather seals to protect against dust and moisture, and to enable worry-free use in inclement conditions and freezing temperatures as low as 14°F.
Rounded seven-blade diaphragm contributes to a pleasing out-of-focus quality to benefit the use of selective focus and shallow depth of field techniques.

Key Features
X-Mount Lens/APS-C Format
27-84mm (35mm Equivalent)
Aperture Range: f/2.8-4 to f/22
Three Aspherical Elements
One Extra-Low Dispersion Element
Super EBC Coating
Linear Autofocus Motor
Optical Image Stabilization
Rounded 7-Blade Diaphragm
Mixing versatility, speed, and a sleek design, the XF 18-55mm f/2.8-4 R LM OIS from FUJIFILM is a flexible 27-84mm-equivalent standard zoom for X-mount mirrorless cameras. Its bright f/2.8-4 maximum aperture range suits working in difficult lighting conditions and also helps to keep the overall and size and weight of the lens down. In regard to optics, this zoom features three aspherical elements and one extra-low dispersion element, which help to control spherical and chromatic aberrations in order to improve sharpness and clarity. A Super EBC coating also improves contrast and color neutrality by reducing flare and ghosting when working in strong lighting conditions. Additionally, benefitting use in a variety of situations, a linear motor delivers quick and quiet autofocus performance and a five stop-effective image stabilization system minimizes the appearance of camera shake.

Standard zoom is designed for APS-C-format Fujifilm X-mount mirrorless cameras and offers a 27-84mm equivalent focal length range.
One extra-low dispersion element is used to greatly reduce color fringing and chromatic aberrations in order to produce high clarity and color fidelity throughout the zoom range.
Three aspherical elements control distortion and spherical aberrations, which helps to improve sharpness and realize more accurate rendering.
Super EBC coating has been applied to individual elements to reduce lens flare and ghosting for improved contrast and color fidelity when working in strong lighting conditions.
A linear motor autofocus system, coupled with an internal focusing design, delivers smooth, near-silent performance that is especially beneficial to video applications and when working in noise-sensitive areas.
Complemented by an enhanced gyro sensor and unique series of algorithms, the optical stabilization system minimizes the appearance of camera shake by up to four stops to enable sharper imaging when working with longer focal lengths or slower shutter speeds.
Rounded seven-blade diaphragm contributes to a pleasing out-of-focus quality to benefit the use of selective focus and shallow depth of field techniques.

Key Features
X-Mount Lens/APS-C Format
27mm (35mm Equivalent)
Aperture Range: f/1.4 to f/16
3 Aspherical, 1 ED Optical Glass Element
15 Elements in 9 Groups
Linear Autofocus Motor
Minimum Focus Distance: 7.9"
Locking "A" Position Aperture Ring
Weather-Sealed Construction
Rounded 9-Blade Diaphragm
The XF 18mm f/1.4 R WR Lens continues FUJIFILM's tradition of compact, portable primes lenses for discerning photographers. This wide-angle lens is well-suited to documentary, travel, landscape, nature, architectural photography, and even astrophotography. Its fast f/1.4 maximum aperture balances size and speed and is suitable for working in available lighting conditions, offers greater control over depth of field, and provides a soft bokeh effect at wider apertures while also limiting the overall size and weight of the lens for everyday use.
This 18mm lens has the equivalent perspective of a 27mm lens for full-frame format cameras, offering superior wide-angle performance in tight or intimate shooting situations. It can help to capture both meticulously planned shots and spontaneous moments that fly by.
The lens body incorporates weather sealing to protect against dust and moisture, and to enable worry-free use in inclement conditions and freezing temperatures as low as 14°F.
The optical design contains 15 elements in 9 groups, including three aspherical elements and one ED element to limit distortion and spherical aberration for optimal sharpness and accurate rendering. The design produces beautifully sharp images from corner to corner with little-to-no distortion at the frame's edges.

The Leofoto FL-L120N LED Panel is a professional and portable light source for those who need extra light when shooting video or photos. It weighs just 185 grams and its slim and compact shape means it takes up little space in your camera backpack. The FL-L120N is perfect for use as a fill light and is an excellent addition to your photography or video equipment.

Key Features
Load Capacity: 22 lb
Height: 15.75"
Weight: 14.6 oz
10-Layer Toray Carbon Fiber
CNC-Machined Aluminum
360° Horizontal Movement
180° Vertical Movement
Mounting Platform with 3 Set Screws
Rotating Weight Hook for Ballast
Precision Index Scales
The HC-28 Horizontal Panoramic Carbon Fiber Center Column System from Leofoto is a 15.75"" carbon fiber extension set that allows an adjustable center column to be added to a tripod without a center column. The rugged but lightweight carbon-fiber column can be rotated a full 360° and tilted 180° from horizontal to fully vertical in either a standard or inverted orientation. One end of the column features a mounting platform with a reversible 1/4"-20 to 3/8"-16 mounting stud and three set screws to securely mount virtually any tripod head and prevent it from rotating. The other end of the column is a weight hook that can be fully rotated so that it can always be facing up to receive a sandbag, equipment bag strap, or other type of ballast.

360° Rotating weight hook always faces upward when the column is horizontal
180° Vertical tilt to change quickly from landscape to portrait orientation
360° Panning base
Anti-twist system prevents a mounted tripod head from rotating
Precision numbered index scales
Hollowed-out design for reduced weight
Bubble level

Easy To Handle
Faster Installing And Removing System
Lock Screen For Allen Wrench
Superior And Durable Quality
Ball Diameter: 36mm
Panning Base Diameter: 52mm
Height: 83mm
Mounting Hole: UNC3/8"-16
Max Load: 18kg
Weight: 430g

The Leofoto LO Mr. O Series Carbon Fiber Tripod with Built-In Hollow Ball is a lightweight and versatile tripod featuring a hollow ball design that allows the center column to be free of the limitation from linear vertical movement, adjusting its angle freely like a ball head. This adjustable center column positioning works along with the independent leg spread to allow quick leveling of a tripod head when shooting on uneven terrain. In addition to being easily positioned, the center column is removable and reversible for positioning a camera upside down and low to the ground for low-perspective and macro photography. The included short center column provides low positioning with a wide leg spread for added stability.

Built-in hollow ball for center column angle adjustment
Removable, reversible center column and short center column
Ballast hook
Central locking control system knob
Independent leg spread
Three leg stop positions: 23 °, 55 °, and 85°
10-layer Toray carbon fiber leg tubes:
22/19/16/13mm
3/8"-16 mounting stud screw
6061-T6 CNC-machined aircraft-grade aluminum components
3/8"-16 and 1/4"-20 accessory mounting sockets
Leofoto LO-224C:
Max. height with center column: 1620mm / 63.78in
Max. height w/o center column: 1310mm / 51.57in
Min. height: 85mm / 3.35in
Folded length: 475mm / 18.70in
Leg Section : 4
Max load: 5kg / 11lb
Weight: 0.81kg / 1.79lb

Key Features
26.1MP APS-C X-Trans BSI CMOS 4 Sensor
X-Processor 5 Image Processor
5-Axis In-Body Image Stabilization
6.2K at 30 fps, 4K at 60 fps
19 Film Simulation Modes
XF 18-55mm f/2.8-4 R LM OIS Lens
A comprehensive everyday companion, the X-S20 from FUJIFILM brings power above its weight class to give photographers and content creators outstanding results on epic journeys and in intimate moments.
For the first time in an X-S-series model, the 26.1-megapixel X Trans CMOS 4 sensor is paired with the X-Processor 5 imaging engine, resulting in high-speed image and video processing, improved autofocus speed and accuracy, FUJIFILM's acclaimed color science, and five-axis in-body image stabilization up to seven stops. The X-S20 excels at video and features a Vlog mode enabling professional-quality footage with easy touchscreen settings adjustments while recording. The Product Priority and Background Defocus modes tailor the camera's autofocus function for optimal content production. Two 3.5mm jacks, one each for an external microphone and headphones, allow next-level audio to accompany the camera's eye-popping imagery. Streaming in 4K at 60 fps and Full HD via a USB-C port unlocks high-quality broadcasting, while the micro-HDMI output supports recording raw video on external devices.
The X-S20 also sports an intuitive design with a sleek approach to seamless handling and shooting efficiency. The camera features larger dials and more pronounced buttons. The X-S20 also features a bright 2.36m-dot electronic viewfinder and rear 3.0" 1.84m-dot touchscreen LCD, which uses a vari-angle design to suit working from high, low, and front-facing angles. The camera has a USB-C connector for tethering and other digital interfacing, and it supports both Wi-Fi and Bluetooth wireless connections. The proprietary FUJIFILM XApp can be used to view and transfer images, see the camera's Live View, and operate the camera remotely. The rechargeable lithium-ion NP-W235 battery delivers longer shooting times, aided in part by the processor's higher efficiency.
The X-S20 combines the versatile and proven APS-C-format 26.1MP X-Trans CMOS 4 sensor with the X-Processor 5, allowing the camera to render its smooth tones and colors at a higher speed for a longer time. The improved low-light performance, and a wide native sensitivity range of ISO 160-12800, are further improved by the in-body image stabilization. As an X-Trans sensor, it utilizes a randomized pixel array, too, which provides a high degree of image quality and sharpness due to the omission of an optical low-pass filter. Versus conventional pixel patterns, the X-Trans design more closely mimics the organic nature of film in order to produce nuanced colors and tonal transitions, while also reducing moiré and aliasing. The continuous shooting's faster performance tops out at a burst of a cropped 30 fps and uncropped 20 fps with the electronic shutter and a 1.25x crop and full-resolution 8 fps shooting rate with the mechanical shutter.

The innovative centre column of the Ranger Explorer allows it to accommodate almost any shooting angle. Adjustments can be done vertically or horizontally, with a unique panning and tilting mechanism for creative framing. For those interested in macro or architectural photography, the Ranger Explorer provides options not available in more traditional tripods.
Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto LS-284CVL Ranger carbon tripod with tiltable center column
With a maximum working height of 155 centimeters, the Leofoto LS-284CVL belongs to the medium-sized tripods in the Ranger Series. Unique to this Ranger tripod is the tiltable center column, which is very useful for macro photography. The folded length is 49 centimeters and the 284CVL weighs about 1.4 kilograms. This Ranger tripod with tiltable center column has a load capacity of 6 kilograms. The tripod comes with a detachable tilting center column, a carrying bag, multitool and spikes. Perfect for those who are looking for a tripod that is not only very suitable for macro photography, but can also be used as an all-round tripod!

The Leofoto Ranger Series
The Ranger Series of Leofoto is characterized by an unprecedented versatility. Because the legs are adjustable in 3 angles, all Ranger tripods can be used low to the ground. This also makes them extremely suitable for macro photography! The Leofoto Ranger tripods are, like all other Leofoto tripods, made of 10-layer carbon. This makes the tripods lightweight and extremely sturdy and durable. So sturdy and durable, that it has a 10-year warranty!

The Ranger LS-284CVL tripod with tiltable center column
The 284CVL tripod from the Leofoto Ranger Series is particularly suitable for macro photography thanks to the tiltable center column. You slide the center column into the cuff for normal use, but you can also mount it upside down to work just above the ground. Loosen the cuff's clamping screw and you can tilt the center column up to 180 degrees and rotate it 360 degrees, allowing you to use it horizontally for hard-to-reach places. Ideal for macro work and close-ups in the great outdoors! The center column has a 3/8-inch tripod screw to which you can attach a separate tripod head as desired. If you want extra stability, you can attach a counterweight to the hook at the bottom of the center column. You can hang a camera bag on this hook, but also a bag of stones, for example.

The Leofoto LV Series Carbon Fiber Video Tripod features a unique hollow ball design, which allows the center column to be free of linear vertical movement limitations, making it adjustable like a ball head. This feature, combined with the independent leg spread, allows for quick leveling on uneven terrain. This is particularly useful when shooting outdoors, where the ground is often uneven and unstable.

But the Leofoto LV Series is not just for video. The removable and reversible center column makes it perfect for low-perspective and macro photography. The included short center column allows for low positioning with a wide leg spread for added stability.

Whether you're a professional videographer, photographer, or just a creative enthusiast, the Leofoto LV Series Carbon Fiber Video Tripod is the perfect tool for all your needs. Its versatility and durability make it the ideal choice for any project.

Features:

Built-in hollow ball for center column angle adjustment
Flip leg locks
Removable, reversible center column
Ballast hook
Included short center column
Central locking control system knob
Independent leg spread
Three leg stop positions: 23 °, 55 °, and 85°
3/8"-16 mounting stud screw
3/8"-16 and 1/4"-20 accessory mounting sockets
10-layer Toray carbon fiber leg tubes and 6061-T6 CNC-machined aircraft-grade aluminum components
The included Leofoto BV-5 Mini Compact Fluid Head is a durable and lightweight piece of equipment made of 6061-T6 aluminum. Despite its weight of only 1.2 lb, it can support up to 8.8 lb and features a 2" flat base with an Arca-Swiss sliding quick release plate for easy and secure mounting of cameras and other equipment.

In addition to its weight capacity, the fluid head also includes useful features such as a bubble level and measurement markings on the base for accurate positioning. The quick release plate allows for quick and easy switching between equipment, and the pan handle can be attached on either side and released or installed using a thumb lever, providing flexibility for various shooting scenarios.

Leofoto LV-284C Tripod + BV-5 Fluid Head:
Max. height with center column: 1580mm / 62.2 in
Max. height w/o center column: 1318mm / 51.9 in
Min. height: 175mm / 6.9 in
Folded length: 560mm / 22 in
Leg Section : 4
Max load: 4kg / 8.8 lbs
Weight: 2kg / 4.4 lbs
Tubes: 28/25/22/19mm

Leofoto BV-5 Fluid Head:
Base diameter: 50mm / 1.97 in
Handle length: 280mm / 11 in
Height: 88mm / 3.46 in
Tilt range: +90°-75°
Weight: 528g / 1.16 lbs
Max. load: 4kg / 8.82 lbs

The Leofoto LX Series tripods are built to be lightweight, compact and perfect for travel. The LX tripods feature a reversible center column, perfect for those ground level shots or use the included short center column to set the tripod low to the ground. The rubber leg wrap offers the perfect grip for the traveler that is on the go. The center column mounting stud is reversible and can swap between a 1/4" or 3/8" mounting stud.

x10 layer Toray carbon fiber leg tubes
Hard anodized aluminum hardware
Unique 3 angle stop system
Twist leg locks
Reversible center column
Short center column
Reversible 1/4" to 3/8" mounting stud
Included: Leofoto tripod case
The Leofoto XB-32Q Ball Head with NP-35 Quick Release Plate is designed to be used with the Leofoto LX Urban Series tripods but can be mounted to any tripod with a 3/8" mounting stud. The XB Series ball heads feature a panning lock knob and a large ball locking knob with tension control on the inner knob. The laser engraved graduated scale provides precise centering and positioning. The XB Series ball heads are ideal for travelers and those on the go.

Leofoto LX-224CT + XB-32Q:

Max. Height with center column fully extended: 1300mm/ 51.18in
Max. Height with center column retracted: 1100mm/ 43.30in
Min. Height: 200mm/ 7.87in
Folded length: 370mm/ 14.56in
Leg Section: 4
Max load: 8kg/ 17.63lb
Weight: 1.12kg/ 2.47lb
Leg tubes: 22/19/16/13mm

comes in 5 colors: Red, Blue, Camouflage, Black carbon fiber, Olive-green

Load Capacity: 33 lb
Maximum Height: 65"
Leg Section: 5
Folded Length: 18.6"
The Leofoto MPQ-325C 5-Section Carbon Fiber Monopod is a compact and portable monopod for strong usage and traveling. Those working in the field with longer lenses will appreciate the versatility and the sturdy build construction. The five-section support carbon fiber tubes that make the tripod a 1.1 lb lightweight support, with a strong load capacity of 33 pounds.

The Leofoto MPQ-325C features an updated sand and waterproof leg locking system.
Waterproof and slip-proof material for added stability and safe handling especially for users with gloves.
The rotating wrist strip adds support and security when carrying.
Toray's 10-layer carbon fiber leg tubes include a cross rhombus construction for increased strength, stability, and vibration dampening.
The monopod ships with a case.

The Leofoto NB-34 ball head with NP-50 quick release plate is a compact but solid tripod head for heavy duty work. The head is suitable for use on all Leofoto tripods and also for use on other brands of tripods with a 3/8-inch tripod screw.
Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto NB-34 Tripod Head with NP-50 Quick Release Plate
The Leofoto NB-34 ball head with NP-50 quick release plate is a compact but solid tripod head for heavy duty work. The head is suitable for use on all Leofoto tripods and also for use on other brands of tripods with a 3/8-inch tripod screw. This robust ball head has a ball diameter of 34 mm and the load capacity is 20 kilos.

Depthy but compact ball head
The solid but very compact Leofoto NB-34 ball head is made of black anodized aircraft aluminum for high strength at low weight and has a built-in level on the quick release. Thanks to the professional, 5-centimetre-long NP-50 Arca-Swiss quick-release plate, you can quickly fix your camera to the tripod. The height of the entire tripod head is 91 mm and the total weight is only 418 grams. The base diameter is 45mm and this, in combination with the large ball diameter of 34mm, ensures a high degree of stability. The ball is CNC machined from a solid block of aluminium and coated to make it super-smooth. The friction of the ball is separately adjustable by a large knob, and the ball of the NB-34 can tilt 90 degrees for vertical shooting.

Tripod head with double panning function
The special feature of the Leofoto NB-34 tripod head is the double panning capability. Both the base plate of this ball head and the camera plate with quick-release connection can each separately rotate 360 degrees. This offers advantages when you want to quickly rotate your camera without adjusting the base, as well as when you want to tilt the camera while the ball is in the air. The fine degree scale on both the base plate and the quick-release coupling allows you to adjust this ball head very precisely. The panning function of the top half is controlled by a quick-release lever and the base of the head is locked by a set screw. Thanks to the modular design of the NB-34, the quick coupling can be exchanged for another type.

The high-quality Leofoto RH-1L panning clamp with Arca-Swiss QP-70 quick release plate is a quick release clamp with panning capability that can be used as an alternative or replacement for the standard Arca-Swiss quick release clamp on various Leofoto tripod heads.
Leofoto RH-1L panning clamp with QP-70 quick release plate
The high-quality Leofoto RH-1L panning clamp with Arca-Swiss QP-70 quick release plate is a quick release clamp with panning capability that can be used as an alternative or replacement for the standard Arca-Swiss quick release clamp on various Leofoto tripod heads. The RH-1L allows very precise positioning of the camera for critical panorama work, and the dial locks the head in exactly the right place.

Interchangeable panning clamp quick release
The professional Leofoto RH-1L panning clamp is CNC machined from black anodized aircraft aluminum, making this clutch very strong yet lightweight. A standard Leofoto coupling can be easily exchanged for the RH-1L panning clamp by loosening the central Allen screw. The screw hole of the RH-1L is 3/8-inch and therefore universally usable for professional applications. The Leofoto RH-1L weighs only 78 grams without the quick release plate, its diameter is 52mm and its thickness is 18mm. Thanks to the built-in spirit level, you can easily level a tripod head when using the RH-1L.

Quick-action coupling with spirit level
The RH-1L has a screw-lock quick release that allows you to tighten the interchangeable QP-70 plate as much as you like, which is useful if you want to move the camera slightly on the tripod head. The professional, 7cm long and 38mm wide QP-70 Arca-Swiss Quick Release Plate allows you to mount your camera on this plate in no time. The 20mm wide clamps of the RH-1L release plate ensure maximum locking of the QP-70 release plate.

Product Details
Tilt range: +90°-75
Panning base travel: 360°
Length: 421mm
Width: 180mm
Height: 130mm
Base diameter: 80mm
Max balanced load: 4kg
Tripod working height: 1820/1330/860mm
Folded length: 880mm
Category: Video
Description
The VT-20 Video head will allow you to create silky smooth motion supported by the high-quality LF-75 Aluminium tripod. The Leofoto VT-20 with the LF-75 kit consists of a video tripod including the liquid head that has been specially developed for modern video filmmakers. This high-quality video tripod is made of aluminum and intended for advanced users and professionals. The tripod comes with the liquid-damped Leofoto VT-20 panning head tripod head. The base plate including tripod head is removable and provided with a separate handle for use ‘from the loose wrist’.

Key Features
Load Capacity: 22 lb
Maximum Height: 55.1"
Minimum Height: 10.2"
Folded Length: 14"
Leg Sections: 5
Weight: 2.7 lb
Aluminum Legs
180° Reverse-Folding Legs
Detachable Monopod Leg
Y-10 Ball Head
The A1005 Aluminum Tripod with Y-10 Ball Head from Sirui is a 5-section tripod that weighs 2.7 lb. The aluminum legs fold a full 180° in reverse to make it a compact 14". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.

The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

The 2.7 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
The aluminum legs have 5-sections and the legs fold in reverse to a compact 14"
Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1004K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1004K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1004K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Ball head included
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. Furthermore, it has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Best quality aluminum in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 2,0kg
- Max. Load capacity: 12kg
- Material: Aluminium

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. load capacity: 20kg - Packing size: 20kg Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1004K tripod/monopod Alu
1x SIRUI K-10X ball head Alu with interchangeable plate
3x metal spikes
1x carrying bag

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1204K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1204K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1204K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Including ball head K-10X
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. It also has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Carbon 8-layer in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 1.68kg
- Max. Load capacity: 12kg
- Material: Carbon

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1204K tripod/monopod carbon
1x SIRUI K-10X ball head aluminium with interchangeable plate
3x metal spikes
1x carrying bag