DG68S&DG69I
Digital Processing Kits For FUJIFILM Frontier (590/570/550/500/340/330 And Noritsu 7700)
Packaging size: 25X32X18
Temperature: 42 C
Time: 22 Second
Replenishment Rate: 2X111 m2
Cat Number: 690502
Working solution P1R : 1.3 L P1R + 1.17 L Starter + 10.53 L Water = 13L
Working solution P2RA : 1.3 L P2RA + 1.3 L P2RB + 10.4 L Water = 13L

Key Features
For Content Creators and Vloggers
Output: 877 Lux at 3.3' (6400K)
2700 to 10,000K; RGB Control
4 x 9.5"; AC/DC Operation
CRI 97
Onboard and Bluetooth Control
Passive Cooling
0 to 100% Dimming, 8 Lighting Effects
Cold Shoe Mounting
Separately Available AC Adapter
The RGB20W RGB On-Camera LED Light from GVM is a compact on-camera variable color temperature light fixture that features cold shoe mounting and includes a tiltable cold shoe bracket. The light fixture features selectable CCT, HSI, and Scene modes. Featuring 162 LEDs, it has a CCT output from 2700 to 10,000K and a CRI of 97. It can produce the RGB spectrum with 360° and 0 to 100% saturation adjustment.

The CCT mode allows you to select your color temperature output with 0 to 100% stepless dimming, allowing you to use the light in a variety of environments from interior to exterior. HSI mode uses the RGB LEDs to provide you a full spectrum color output, so you can adjust the output from 0 to 360° on the RGB scale while adjusting brightness, as well as saturation from 0 to 100%. Scene mode allows you to access eight built-in special effects. A downloadable app allows you to control your fixture from your phone via Bluetooth. Power the light via the built-in L-series battery plate and included battery or using an optional AC power supply.

Operating Modes
RGB Color Mode
Scroll through the RGB color wheel in 1° increments. Dial-in nearly any color in the visible spectrum.
CCT Mode
The traditional correlated color temperature (CCT) mode allows you to accurately adjust your color temperature from 2700 to 10,000K.
Features
Intuitive On-Unit Interface with OLED Display
The built-in OLED screen offers a simple display, while push buttons and a single rotating knob provide local control of the fixture.
GVM LED App
Install the app on your mobile device to remotely control the fixture via Bluetooth to control color temperature, HSI settings, and brightness, as well as on/off and duration. The app is available for both iOS and Android.
Mounting
The fixture features a 1/4"-20 threaded hole on the bottom and includes a tiltable cold shoe bracket that attaches to the rear of the unit by snapping into slots on the back. This allows you to tilt the fixture forward or back as you desire. The tiltable shoe bracket also has a 1/4"-20 threaded hole for mounting on light stands or other supports.
Accessory
A cold shoe is built into the top of the fixture for mounting accessories on the light.
8 Built-In Scene Modes
Police car, candlelight, TV, bad bulb, lightning, party, disco, paparazzi

Compatible with Canon, Nikon, Sony, Panasonic, Olympus, Fuji, and Pentax DSLR cameras with a hot shoe, the MF-R76 Macro Ring Flash from Godox illuminates your subject with a soft and even light, which is ideal for revealing small, close-up details. The ring light consists of two components, a controller that slips into your camera's hot shoe and the ring flash that mounts on your lens. Godox includes 49, 52, 55, 58, 62, 67, 72, and 77mm adapter rings to ensure wide compatibility with most lenses. The control unit powers the system via a long-lasting rechargeable lithium battery, which can provide up to 660 full-power flashes. The manual unit regulates light intensity in 1/3 EV increments from 1/1 full power to 1/128, and a large LCD panel conveniently displays flash settings for easy navigation and control.

Compatible with Canon E-TTL, the MF-R76C TTL Macro Ring Flash from Godox illuminates your subject with a soft and even light, which is ideal for macro shooting scenes. The ring light consists of two components: a controller that slips into your camera's hot shoe, and the ring flash, which mounts on your lens. Godox includes 49, 52, 55, 58, 62, 67, 72, and 77mm adapter rings to ensure wide compatibility with most lenses. With a guide number of 45.9' at ISO 100, the MF-R76C provides detailed, wrap-around lighting for your close-ups. The twin-tube design also allows users to set each side to different power ratios, enabling higher contrast lighting when desired.

Adding to the unit's versatility, the MF-R76C offers TTL and manual modes combined with HSS, first, and second curtain sync capabilities. Besides that, two focus-assist lamps with 10 adjustable levels of power ratio are useful for low light scenes. The control unit powers the system via an included rechargeable lithium battery to ensure long-lasting shoots, giving you up to full-power 550 flashes. A large panel conveniently displays flash settings for easy navigation and control. Godox also supplies a charger, a USB-C cable, and a storage bag.

Compatible with Nikon i-TTL, the MF-R76N TTL Macro Ring Flash from Godox illuminates your subject with a soft and even light, which is ideal for macro shooting scenes. The ring light consists of two components: a controller that slips into your camera's hot shoe, and the ring flash, which mounts on your lens. Godox includes 49, 52, 55, 58, 62, 67, 72, and 77mm adapter rings to ensure wide compatibility with most lenses. With a guide number of 45.9' at ISO 100, the MF-R76N provides detailed, wrap-around lighting for your close-ups. The twin-tube design also allows users to set each side to different power ratios, enabling higher contrast lighting when desired.

Adding to the unit's versatility, the MF-R76N offers TTL and manual modes combined with HSS, first, and second curtain sync capabilities. Besides that, two focus-assist lamps with 10 adjustable levels of power ratio are useful for low light scenes. The control unit powers the system via an included rechargeable lithium battery to ensure long-lasting shoots, giving you up to full-power 550 flashes. A large panel conveniently displays flash settings for easy navigation and control. Godox also supplies a charger, a USB-C cable, and a storage bag.

Compatible with Sony TTL and optimized for dental photography, the MF-R76S+ Dental Macro Ring Flash from Godox delivers an adjusted, improved performance for dental shootings. It illuminates teeth in every direction with a soft and even light, eliminating unwanted vignetting and shadows. The ring light consists of two components: a controller that slips into your camera's hot shoe, and the ring flash, which mounts on your lens. Godox includes 49, 52, 55, 58, 62, 67, 72, and 77mm adapter rings to ensure wide compatibility with most lenses. With a guide number of 45.9' at ISO 100, the MF-R76S+ provides detailed, wrap-around lighting for your close-ups.

Adding to the unit's versatility, the MF-R76S+ offers TTL and manual modes combined with HSS, first, and second curtain sync capabilities. Besides that, two focus-assist lamps with 10 adjustable levels of power ratio are useful for low light scenes. The control unit powers the system via an included rechargeable lithium battery to ensure long-lasting shoots, giving you up to full-power 550 flashes. A large panel conveniently displays flash settings for easy navigation and control. Godox also supplies a charger, a USB-C cable, and a storage bag.

Practical Dental Photography Guide
For best results taking dental photographs, your camera should be set to manual exposure mode with a shutter speed of 1/200s at ISO 100. Godox also recommends a distance of 5' between the shooter and the subject. Additionally, setting your lens to manual focus is suggested. The MF-R76S+ will help you to capture images at different stages of the dental treatment to easily compare the patient's progress.

Compatible with DSLR cameras with a hot shoe, the ML-150 II Macro Ring Flash from Godox illuminates your subject with soft, nearly shadowless light that reveals every detail. The ring light consists of two components: a controller, which slips into your camera's hot shoe, and the ring flash, which mounts on your lens. Godox includes 49, 52, 55, 58, 62, 67, 72, and 77mm adapter rings to insure wide compatibility. The control unit is the brain and power pack of the system. The manual unit can regulate light intensity in 11 steps and recycles in 0.1 to 2 seconds and runs on four AA batteries that give you 300 to 1000 flashes.

Godox WMicS2

Overview


For mobile journalists, videographers, and vloggers, the Godox WMicS2 Kit 1 is a wireless system with one transmitter with lavalier microphone and one dual-channel receiver. It delivers reliable transmission with clear sound up to 656' over 96 selectable UHF frequencies directly to your camera, mixer, or smartphone with 3.5mm port. Easy-to-use with plug-and-play operation, this system offers a complete solution for recording dialogue, interviews, or lectures.

The clip-on transmitter offers both a built-in microphone and a 3.5mm port for the included omnidirectional lavalier, which attaches to a lapel or shirt. You can record backup audio via the TF card slot for worry-free audio capture. Built-in features like a low-cut filter and mute can be controlled via the onboard buttons.

The dual-channel receiver can record in either mono or stereo modes. You can easily add an additional transmitter (available separately) for two-person applications. Both devices come with back clips and magnet mounts to discreetly attach to videographer or subject. They have 1/4"-20 threads for mounting to compatible cold shoe adapters. Internal 770mAh lithium batteries power both components and included USB-C cables charge them back up once depleted. A foam windscreen can be attached to the transmitter to reduce wind interference.

Features at a Glance
Wireless system for vlogging, interviews, and video production
Works with smartphones, cameras, and audio recorders with 3.5mm input jack
656' line-of-sight range, 197' range with barriers
Foldable antennae can be rotated on both devices to improve signal transmission
1 clip-on transmitter with built-in microphone and foam windscreen
1 lavalier mic included for low-profile visual work
Low-cut/mute button on transmitter
Dual-channel receiver clips or screws onto camera shoe mount adapter
Adjustable output volume and mono/stereo output modes on receiver
Built-in 770mAh lithium rechargeable batteries
OLED display on receiver show important information including battery life, connectivity, and more
Includes USB-C charging cables, 3.5mm TRS to TRRS cable, and 3.5mm TRS to TRS cable

Godox WMicS2

Overview


For mobile journalists, videographers, and vloggers, the Godox WMicS2 Kit 2 is a wireless system with two transmitters with lavalier microphones and one dual-channel receiver. It delivers reliable transmission with clear sound up to 656' over 96 selectable UHF frequencies directly to your camera, mixer, or smartphone with 3.5mm port. Easy-to-use with plug-and-play operation, this system offers a complete solution for recording dialogue, interviews, or lectures.

Each clip-on transmitter offers both a built-in microphone and a 3.5mm port for the included omnidirectional lavaliers which attach to a lapel or shirt. You can record backup audio via their TF card slots for worry-free audio capture. Built-in features like a low-cut filter and mute can be controlled via the onboard buttons.

The dual-channel receiver can record in either mono or stereo modes. Each device comes with back clips and magnet mounts to discreetly attach to videographer or subject. They have 1/4"-20 threads for mounting to compatible cold shoe adapters. Internal 770mAh lithium batteries power all components and an included case charges them up once depleted. Two USB cables and two foam windscreens for the transmitters are also included.

Features at a Glance
2-person wireless system for vlogging, interviews, and video production
Works with smartphones, cameras, and audio recorders with 3.5mm input jack
656' line-of-sight range, 197' range with barriers
Foldable antennae can be rotated on each device to improve signal transmission
2 clip-on transmitters with built-in microphone, and foam windscreens
2 lavalier mics included for low-profile visual work
Low-cut/mute button on transmitters
Dual-channel receiver clips or screws onto camera shoe mount adapter
Adjustable output volume and mono/stereo output modes on receiver
Built-in 770mAh lithium rechargeable batteries
OLED display on receiver shows important information including battery life, connectivity, and more
Includes USB-C charging cables, 3.5mm TRS to TRRS cable, and 3.5mm TRS to TRS cable
Convenient charging case included for transport and storage

The Cinema C5 Matte Box Filmmaker Kit from NiSi is a lightweight, clamp-on matte box system that supports 4 x 4" and 4 x 5.6" filters. Crafted for cinema-style production applications, the C5 works in concert with NiSi's cinema line of filters and 4 x 4" rotating circular filters. Built from plastic, aluminum, and carbon fiber, the matte box has a carbon fiber top flag for better control over glare from overhead light sources.

The filter holder features a top slot for 4x4 filters and a side slot for 4 x 5.65" filters, with the included filter trays supporting 2 and 4mm thick filters. The matte box facilitates having the filters as close as possible to the lens to ensure that vignetting does not occur. This kit includes a filter pouch for storing filters and additional accessories, as well as a set of adapter rings for using the matte box on lenses with 67, 72, 77, and 82mm front threads. Also included with this kit are a True Color VND 1-5 Stops filter, an FS ND16 4 x 5.65" filter, and a 1/8 Black Mist 4 x 5.65" filter.

The Cinema C5 Matte Box Cinema Kit from NiSi is a lightweight, clamp-on matte box system that supports 4 x 4" and 4 x 5.6" filters. Crafted for cinema-style production applications, the C5 works in concert with NiSi's cinema line of filters and 4 x 4" rotating circular filters. Built from plastic, aluminum, and carbon fiber, the matte box has a carbon fiber top flag for better control over glare from overhead light sources.

The filter holder features a top slot for 4x4 filters and a side slot for 4 x 5.65" filters, with the included filter trays supporting 2 and 4mm thick filters. The matte box facilitates having the filters as close as possible to the lens to ensure that vignetting does not occur. This kit includes a filter pouch for storing filters and additional accessories, as well as a set of adapter rings for using the matte box on lenses with 67, 72, 77, and 82mm front threads. Also included with this kit are a True Color VND 1-5 Stops filter, a True Color Rotating PL filter, an FS ND16 4 x 5.65" filter, and a 1/8 Black Mist 4 x 5.65" filter.

The Cinema C5 Matte Box Starter Kit from NiSi is a lightweight, clamp-on matte box system that supports 4 x 4" and 4 x 5.6" filters. Crafted for cinema-style production applications, the C5 works in concert with NiSi's cinema line of filters and 4 x 4" rotating circular filters. Built from plastic, aluminum, and carbon fiber, the matte box has a carbon fiber top flag for better control over glare from overhead light sources.

The filter holder features a top slot for 4x4 filters and a side slot for 4 x 5.65" filters, with the included filter trays supporting 2 and 4mm thick filters. The matte box facilitates having the filters as close as possible to the lens to ensure that vignetting does not occur. This kit includes a filter pouch for storing filters and additional accessories, as well as a set of adapter rings for using the matte box on lenses with 67, 72, 77, and 82mm front threads.