Key Features
Wireless Programmable Motorized Slider
Robust 31" Portable Travel Slider
Carbon Fiber Rails
Supports up to 5.5 lb
1/4"-20 and 3/8"-16 Tripod Mounting
Hot Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
Integrated Display on Remote Controller
The 31" GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider is a motorized slider you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of slider travel. The slider carriage has a built-in bubble level, so you can check that your setup is level. Built-in feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot-swap for uninterrupted use. The two included NP-F750 type batteries will run the system for approximately 10 hours. The remote features an integrated display and during time-lapse moves can be turned off to save battery power.

Remote Controller
The wireless controller features its own internal battery and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
The 32″ ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31″ of travel.

The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.

You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:

DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the move

Remote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting

The slider can traverse the 31″ sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation

Key Features
For Vlogging, YouTube, Streaming, TikTok
1-Person Shoot to Camera/Phone/Computer
Clip-On Transmitter/Mic + Lav Mic
Clip-On Receiver with Headphone Jack
Automatic Pairing for Easy Operation
3.5mm Cables for Camera & Mobile Device
USB-Rechargeable 4-Hour Batteries
Up to 164' Operating Range
The KKX-WM01 from GVM is a compact wireless microphone system providing hands-free audio for videos on Instagram, YouTube, and TikTok or for live-streaming, vlogging, meetings, interviews, and online classes. It offers a complete, versatile, and simple-to-use solution for recording conversations and speech directly to a mirrorless/DSLR camera or a mobile device with a 3.5mm headphone jack.

The KKX-WM01 consists of a small, lightweight clip-on transmitter with its own built-in microphone along with an included lavalier mic that can be used if you prefer a more discreet mic setup. The lav includes a foam windshield to protect against breath and wind noise. The system also includes a small clip-on receiver that mounts on your camera or mobile device and connects to its 3.5mm input jack. Both a 3.5mm TRS cable, for camera and computer use, and a 3.5mm TRRS cable, for smartphone use, are included.

The system delivers reliable transmission with clear sound at a line-of-sight distance up to 164' (98' with limited obstacles). The receiver features a 3.5mm headphone jack, enabling you to monitor your audio in real time. The built-in rechargeable batteries provide up to 4 hours of operation and recharge via USB Type-C ports. A split USB charging cable is included that allows you to charge both components at the same time.

Clip-On Transmitter with Built-In Mic + Lavalier Mic
The compact transmitter is equipped with both a built-in microphone and a 3.5mm input that accepts its included lavalier microphone.
The transmitter can be clipped to your collar, tie, or pocket without having to wire yourself or your talent, providing a fast, truly wireless setup.
Use the lavalier if you prefer a more discreet look and have time to mic up your talent.
Compact Single-Channel Receiver
The tiny, lightweight receiver features a clip to attach to cameras and mobile devices.
The receiver features a 3.5mm output jack.
3.5mm cables for mobile devices and cameras are included.
Straightforward Menu-Free Operation
The system is easy to use, and the components pair automatically.
The transmitter and the receiver are powered for up to 4 hours via a built-in rechargeable battery.
The components feature LEDs to indicate battery status.
A split USB charging cable is included.
Monitor in Real Time
If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.
2.4 GHz Digital Wireless
To avoid interference from TV and radio waves, the system operates in the 2.4 GHz frequency band—far away from television, radio, and UHF wireless microphone transmissions.
The system offers a line-of-sight operating range up to 164 feet or up to 98 feet when some obstacles are present.
For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.
The system offers a low latency of only 10ms.

Key Features
40.2MP APS-C X-Trans CMOS 5 HR Sensor
X-Processor 5 Image Processor
Fujinon 23mm f/2 Lens
35mm Full-Frame Equivalent
6-Stop In-Body Image Stabilization
425-Point Intelligent Hybrid AF System
Hybrid 0.66x OVF with 3.69m-Dot OLED EVF
3.0" 1.62m-Dot Tilting Touchscreen
Bluetooth and Wi-Fi Connectivity
20 Film Simulation Modes with REALA ACE

Timeless Design, Cutting-Edge Tech, Unforgettable Imagery
Having refined the retro styling and ergonomics of the rangefinder-inspired X100-series in its viral fifth iteration, FUJIFILM follows up with the tricked-out black X100VI Mirrorless Camera, filling out the timeless, compact, touch-friendly body with the speed, power, and pixel count of its flagship APS-C sensor-and-processor combo. Featuring unsurpassed design and a wealth of upgraded tech, the X100VI is poised to be the every day, everywhere darling of photographers who yearn to transform the mundane into the magical.

40MP X-Trans CMOS 5 HR Sensor, X-Processor 5
The high-resolution 40.2MP X-Trans CMOS 5 HR sensor has an enhanced image-processing algorithm that boosts resolution without compromising the signal-to-noise ratio, delivering astonishing image quality. This sensor has an improved pixel structure, allowing light to be received more efficiently. Partner to the newly designed sensor is a fresh engine X-Processor 5-which uses 64-bit processing to realize 3x faster speeds for both video and photo tasks. The combination of this high-resolution sensor and processor achieves remarkably fast operation, wide dynamic range, and incredible photo quality, even at higher ISO sensitivities.

Powerful Video Capabilities
The powerful video function afforded by the sensor-processor combo means movies can be recorded internally at up to 6.2K at 30p in 10-bit color, along with a 4K HQ mode which oversamples 6.2K footage for superior 4K output. Higher frame rate videos, at 4K 60p or FHD 240p, are also available.

In-Body Image Stabilization, Improved Autofocus
The upgraded sensor-processor combination allows the X100VI to be the first in the series to feature in-body image stabilization. The five-axis sensor-shift IBIS helps to minimize the appearance of camera shake by up to six stops. The improved processing also benefits autofocus performance, producing a faster, more intelligent hybrid focusing system using 425 phase-detection points. Backed by deep learning, an AI adaptive algorithm means this focusing system is better suited to automatically detect and track a variety of subject types, ensuring the magic moment is never missed.

Built for Speed, Built for the Street
Further benefiting street photographers, the X100VI is ready for action, no matter how fast the subject is moving. A top electronic shutter speed of 1/180,000 sec and a maximum mechanical shutter speed of 1/4000 sec will stop any subject in its tracks. Keep your finger down, and the X100VI records images at up to 20 fps with the electronic shutter at a 1.29x crop and 11 fps with the mechanical shutter.

Fujinon 23mm f/2 Lens
Updated in the fifth generation, the camera's Fujinon 23mm f/2 lens features a revised optical design that includes two aspherical elements for improved sharpness and clarity through the reduction of spherical aberrations and distortion. With a 35mm full-frame equivalency, the lens' bright f/2 design handles low-light conditions and affords a shallow depth of field. When it's bright, the built-in 4-stop ND filter can also be used for more control over your exposures and to better enable working with shallow depth of field. While the lens has a fixed focal length, the X100VI integrates 1.4x and 2x digital teleconverter settings to simulate the look of working with longer focal lengths of 49mm and 70mm, respectively.

Advanced Hybrid Viewfinder
Both optical and electronic viewfinder types are incorporated into the unique Advanced Hybrid Viewfinder, which lets you select from the simplicity and familiarity of an OVF as well as the versatility of an EVF. The optical viewfinder provides a clear, lifelike view of the scene for easier composition and subject tracking. Its enhanced design incorporates an Electronic Rangefinder function, which mimics the functionality of a mechanical rangefinder, and simultaneously overlays information from the electronic viewfinder on top of the optical viewfinder for comparative manual focus control.

Film Simulation Modes
Film Simulation modes allow you to reproduce the look and feel of several of FUJIFILM's film types. The X100VI boasts FUJIFILM's latest recipe-REALA ACE-and also includes 19 other modes, including Provia, Velvia, Astia, Classic Chrome, PRO Neg. Std, PRO Neg. Hi, Classic Neg., Nostalgic Neg., Eterna Cinema, Eterna Bleach Bypass, Acros, Acros + Ye Filter, Acros + R Filter, Acros + G Filter, Black & White, Black & White + Ye Filter, Black & White + R Filter, Black & White + G Filter, and Sepia.
In addition to simulating specific film types, a Grain Effect mode is also available to replicate the look of old film photos with an organic textured appearance, which is especially noticeable when printing. Color Chrome and Color Chrome Blue effects are also available to deepen color, tonal response, and gradation with higher saturation colors.

Frame.io Camera-to-Cloud integration
Deliver photos or video straight to the cloud moments after they're created with the first accessory-free integration for Frame.io Camera to Cloud. Use the camera's built-in Wi-Fi or Ethernet LAN connection to connect to Frame.io and deliver hi-res raw or JPEG images, send h.264 video proxies, or upload video securely for review.

Body Design
With the same 5 x 3 x 2.1" dimensions as its predecessor, it weighs just 1.5 oz more for a portable 1.1 lb total weight.
The tilting 3.0" 1.62m-dot LCD has a touchscreen design for intuitive operation and playback.
The durable design can be made weather-resistant when paired with the optional AR-X100 Adapter Ring and optional weather-sealing protection ring.
The top plate incorporates a series of locking dials and levers for fast, intuitive control over exposure settings, including dials for shutter speed and exposure compensation.
Front and rear command dials integrate a push function for easier use and settings selection.
The rear joystick is available for intuitive selecting and switching of AF points as well as menu navigation and image playback.
Integrated Bluetooth and Wi-Fi connectivity allow for wirelessly sharing images to a mobile device or to use the device to remotely control the camera.
Single SD memory card slot supports up to the UHS-I standard.
Included NP-W126S battery provides approximately 310 frames per charge when working with the EVF or 450 frames per charge when working with the OVF.

For vloggers, livestreamers, videographers, and mobile journalists who need a space-saving microphone that provides higher-quality sound capture than their mobile device's built-in mic, the Godox Geniusmic LT offers an ultracompact and affordable solution. This miniature condenser mic connects directly to the Lightning port on your iPhone or iPad, no external cabling or mount required. It also features its own headphone output on the rear of the mic body, so you can conveniently monitor your input signal or playback through earbuds or studio headphones.

Since the Geniusmic LT runs on Lightning power (no batteries required) and has no controls to configure, it ensures easy, user-friendly operation for people of all experience levels. The aluminum housing provides durability, light weight, and effective resistance to interference from RF sources. By incorporating a directional polar pattern, the microphone reduces the pickup of off-axis sound such as ambient noise. Bundled with a foam windscreen and a furry windshield, the Geniusmic LT helps you record audio with less noise from wind whether you shoot indoors or outside.

For vloggers, livestreamers, videographers, and mobile journalists who need a space-saving microphone that provides higher-quality sound capture than their mobile device's built-in mic, the Godox Geniusmic UC offers an ultracompact and affordable solution. This miniature condenser mic connects directly to the USB Type-C port on your smartphone or tablet, no external cabling or mount required. It also features its own headphone output on the rear of the mic body, so you can conveniently monitor your input signal or playback through earbuds or studio headphones.

Since the Geniusmic UC runs on USB power (no batteries required) and has no controls to configure, it ensures easy, user-friendly operation for people of all experience levels. The aluminum housing provides durability, light weight, and effective resistance to interference from RF sources. By incorporating a directional polar pattern, the microphone reduces the pickup of off-axis sound such as ambient noise. Bundled with a foam windscreen and a furry windshield, the Geniusmic UC helps you record audio with less noise from wind whether you shoot indoors or outside.

The black MoveLink II M1 from Godox provides an easy-to-use and cost-effective entry into the world of hands-free wireless audio for a wide variety of content creators, including YouTube and TikTok personalities, vloggers, mobile journalists, and more. The system offers an ultracompact clip-on microphone/transmitter, a lavalier mic, and a two-channel, camera-mountable receiver to provide a portable, all-inclusive solution that lets you record a subject's audio to a camera or phone with a 3.5mm input jack.


Compact Transmitter
The tiny transmitter weighs less than 1 oz and features a built-in clip and an omnidirectional microphone, making it simple to attach it to a lapel or shirt for quick and easy, true-wireless audio. The M1 offers a digital frequency-hopping 2.4 GHz bandwidth system with a maximum range of 328'. For a more discreet look, you can use the included lavalier microphone and simply plug the mic's cable into the 3.5mm input port on the transmitter.

Dual-Channel Receiver
The receiver features a belt clip that mounts to camera shoe mounts. Its 3.5mm output allows you to connect to your phone or camera's 3.5mm input jack. A 3.5mm TRS to TRS cable for use with DSLR/mirrorless cameras and a 3.5mm TRS to TRRS cable for use with compatible smartphones and mobile devices are included. The two-channel receiver makes it easy to add an additional transmitter (available separately) for applications with two presenters on camera at once.

2.4 GHz Frequency Hopping, Extended Transmission Range
Digital, wireless frequency-hopping technology in the 2.4 GHz spectrum delivers high-quality audio between components from up to 328.1' away. Frequency hopping technology ensures a more stable signal by avoiding interference with high Bluetooth and Wi-Fi traffic.

The white MoveLink II M1 from Godox provides an easy-to-use and cost-effective entry into the world of hands-free wireless audio for a wide variety of content creators, including YouTube and TikTok personalities, vloggers, mobile journalists, and more. The system offers an ultracompact clip-on microphone/transmitter, a lavalier mic, and a two-channel, camera-mountable receiver to provide a portable, all-inclusive solution that lets you record a subject's audio to a camera or phone with a 3.5mm input jack.


Compact Transmitter
The tiny transmitter weighs less than 1 oz and features a built-in clip and an omnidirectional microphone, making it simple to attach it to a lapel or shirt for quick and easy, true-wireless audio. The M1 offers a digital frequency-hopping 2.4 GHz bandwidth system with a maximum range of 328'. For a more discreet look, you can use the included lavalier microphone and simply plug the mic's cable into the 3.5mm input port on the transmitter.

Dual-Channel Receiver
The receiver features a belt clip that mounts to camera shoe mounts. Its 3.5mm output allows you to connect to your phone or camera's 3.5mm input jack. A 3.5mm TRS to TRS cable for use with DSLR/mirrorless cameras and a 3.5mm TRS to TRRS cable for use with compatible smartphones and mobile devices are included. The two-channel receiver makes it easy to add an additional transmitter (available separately) for applications with two presenters on camera at once.

2.4 GHz Frequency Hopping, Extended Transmission Range
Digital, wireless frequency-hopping technology in the 2.4 GHz spectrum delivers high-quality audio between components from up to 328.1' away. Frequency hopping technology ensures a more stable signal by avoiding interference with high Bluetooth and Wi-Fi traffic.

The black MoveLink II M2 from Godox provides an easy-to-use and cost-effective entry into the world of hands-free wireless audio for a wide variety of content creators, including YouTube and TikTok personalities, vloggers, mobile journalists, and more. The system offers two ultracompact clip-on microphone/transmitters, two lavalier mics, and a two-channel camera-mountable receiver to provide a portable, all-inclusive solution that lets you record a subject's audio to a camera or phone with a 3.5mm input jack.


Two Compact Transmitters
Each of the two transmitters weighs less than 1 oz and features a built-in clip and an omnidirectional microphone, making it simple to attach it to a lapel or shirt for quick and easy, true-wireless audio. The M2 offers a digital frequency-hopping 2.4 GHz bandwidth system with a maximum range of 328'. For a more discreet look, you can use the included lavalier microphones and simply plug the mic's cable into the 3.5mm input port on either transmitter.

Dual-Channel Receiver
The receiver features a belt clip that mounts to camera shoe mounts. Its 3.5mm output allows you to connect to your phone or camera's 3.5mm input jack. A 3.5mm TRS to TRS cable for use with DSLR/mirrorless cameras and a 3.5mm TRS to TRRS cable for use with compatible smartphones and mobile devices are included. The two-channel receiver makes it easy to add an additional transmitter (available separately) for applications with two presenters on camera at once.

2.4 GHz Frequency Hopping, Extended Transmission Range
Digital, wireless frequency-hopping technology in the 2.4 GHz spectrum delivers high-quality audio between components from up to 328.1' away. Frequency hopping technology ensures a more stable signal by avoiding interference with high Bluetooth and Wi-Fi traffic.

The white MoveLink II M2 from Godox provides an easy-to-use and cost-effective entry into the world of hands-free wireless audio for a wide variety of content creators, including YouTube and TikTok personalities, vloggers, mobile journalists, and more. The system offers two ultracompact clip-on microphone/transmitters, two lavalier mics, and a two-channel camera-mountable receiver to provide a portable, all-inclusive solution that lets you record a subject's audio to a camera or phone with a 3.5mm input jack.


Two Compact Transmitters
Each of the two transmitters weighs less than 1 oz and features a built-in clip and an omnidirectional microphone, making it simple to attach it to a lapel or shirt for quick and easy, true-wireless audio. The M2 offers a digital frequency-hopping 2.4 GHz bandwidth system with a maximum range of 328'. For a more discreet look, you can use the included lavalier microphones and simply plug the mic's cable into the 3.5mm input port on either transmitter.

Dual-Channel Receiver
The receiver features a belt clip that mounts to camera shoe mounts. Its 3.5mm output allows you to connect to your phone or camera's 3.5mm input jack. A 3.5mm TRS to TRS cable for use with DSLR/mirrorless cameras and a 3.5mm TRS to TRRS cable for use with compatible smartphones and mobile devices are included. The two-channel receiver makes it easy to add an additional transmitter (available separately) for applications with two presenters on camera at once.

2.4 GHz Frequency Hopping, Extended Transmission Range
Digital, wireless frequency-hopping technology in the 2.4 GHz spectrum delivers high-quality audio between components from up to 328.1' away. Frequency hopping technology ensures a more stable signal by avoiding interference with high Bluetooth and Wi-Fi traffic.

Godox UMIC82 Overview

With its cardioid, omnidirectional, bidirectional, and stereo pickup options, the Godox UMic82 desktop USB condenser microphone offers versatility and quality sound capture for podcasters, content creators, singers, and musicians using Mac or Windows computers for their productions.

Cardioid mode is ideal for recording one speaker or a solo performer in front of the mic while rejecting background noise behind the mic, whereas the omnidirectional setting captures sound from 360° around the capsule, great for situations where multiple people are gathered near the mic. The bidirectional mode picks up speakers or vocalists on each side of the mic, while the stereo mode offers two-channel capture for a pronounced stereo effect when desired.

The UMic82 boasts a built-in grille to reduce pops from vocal plosives, a gain knob for optimizing the mic level, and a mute button to cut the mic signal between performances or sections. Also, the mic features a 3.5mm headphone jack for convenient real-time audio monitoring. Driver-free setup ensures simple plug-and-play operation, and the included USB Type-C and USB Type-C to USB Type-A cables ensure proper connectivity with computers and many mobile devices.

Godox V1 Overview

Godox Introduces Round-Head V1 On-Camera Flash

Offering a powerful 76Ws output along with a distinct design, the Godox V1 Flash is an advanced light source with features that clearly reflect the current state of the industry. Compatible with Canon E-TTL / E-TTL II, this flexible on-camera light is distinguished by its round head, which provides soft, smooth light with gradual fall off that augments the flattering output.

Flash head rotates 330°, tilts -7 to 120°, and has a magnetic surface for lightning-fast attachment of Godox's accessory light modifiers
Powered by a removable 2600mAh lithium-ion battery that will give you up to 480 full-power flashes on a charge
Recycles to full power in just 1.5 seconds
Supports High Speed Sync up to 1/8000 sec for managing bright backgrounds and shooting with wide apertures; also, the V1 supports front and rear-curtain sync
The V1 has an optical receiver as well as a built-in 2.4 GHz radio receiver, which accepts wireless signals from Godox X System transmitters
Godox X System enables controlling up to four wireless groups in a transmitter/receiver configuration whereby settings made on the V1 are duplicated on other synced flashes
Other features include an AF assist lamp, a 3200K LED modeling lamp, and a 2.5mm port for cabled triggering

Godox V1 Overview

Godox Introduces Round-Head V1 On-Camera Flash


Offering a powerful 76Ws output along with a distinct design, the Godox V1 Flash is an advanced light source with features that clearly reflect the current state of the industry. Compatible with FUJIFILM TTL, this flexible on-camera light is distinguished by its round head, which provides soft, smooth light with gradual fall off that augments the flattering output.

Flash head rotates 330°, tilts -7 to 120°, and has a magnetic surface for lightning-fast attachment of Godox's accessory light modifiers
Powered by a removable 2600mAh lithium-ion battery that will give you up to 480 full-power flashes on a charge
Recycles to full power in just 1.5 seconds
Supports High Speed Sync up to 1/8000 sec for managing bright backgrounds and shooting with wide apertures; also, the V1 supports front and rear-curtain sync
The V1 has an optical receiver as well as a built-in 2.4 GHz radio receiver, which accepts wireless signals from Godox X System transmitters
Godox X System enables controlling up to four wireless groups in a transmitter/receiver configuration whereby settings made on the V1 are duplicated on other synced flashes
Other features include an AF assist lamp, a 3200K LED modeling lamp, and a 2.5mm port for cabled triggering

Godox V1 Overview

Godox Introduces Round-Head V1 On-Camera Flash

Offering a powerful 76Ws output along with a distinct design, the Godox V1 Flash is an advanced light source with features that clearly reflect the current state of the industry. Compatible with Nikon i-TTL, this flexible on-camera light is distinguished by its round head, which provides soft, smooth light with gradual fall off that augments the flattering output.

Flash head rotates 330°, tilts -7 to 120°, and has a magnetic surface for lightning-fast attachment of Godox's accessory light modifiers
Powered by a removable 2600mAh lithium-ion battery that will give you up to 480 full-power flashes on a charge
Recycles to full power in just 1.5 seconds
Supports High Speed Sync up to 1/8000 sec for managing bright backgrounds and shooting with wide apertures; also, the V1 supports front and rear-curtain sync
The V1 has an optical receiver as well as a built-in 2.4 GHz radio receiver, which accepts wireless signals from Godox X System transmitters
Godox X System enables controlling up to four wireless groups in a transmitter/receiver configuration whereby settings made on the V1 are duplicated on other synced flashes
Other features include an AF assist lamp, a 3200K LED modeling lamp, and a 2.5mm port for cabled triggering

Godox V1 Overview

Godox Introduces Round-Head V1 On-Camera Flash


Offering a powerful 76Ws output along with a distinct design, the Godox V1 Flash is an advanced light source with features that clearly reflect the current state of the industry. Compatible with Sony ADI / P-TTL, this flexible on-camera light is distinguished by its round head, which provides soft, smooth light with gradual fall off that augments the flattering output.

Flash head rotates 330°, tilts -7 to 120°, and has a magnetic surface for lightning-fast attachment of Godox's accessory light modifiers
Powered by a removable 2600mAh lithium-ion battery that will give you up to 480 full-power flashes on a charge
Recycles to full power in just 1.5 seconds
Supports High Speed Sync up to 1/8000 sec for managing bright backgrounds and shooting with wide apertures; also, the V1 supports front and rear-curtain sync
The V1 has an optical receiver as well as a built-in 2.4 GHz radio receiver, which accepts wireless signals from Godox X System transmitters
Godox X System enables controlling up to four wireless groups in a transmitter/receiver configuration whereby settings made on the V1 are duplicated on other synced flashes
Other features include an AF assist lamp, a 3200K LED modeling lamp, and a 2.5mm port for cabled triggering

Godox VDS-M1

Overview


Whether shooting indoors or outside, the Godox VDS-M1 shotgun microphone offers mobile videographers, location sound recordists, and indie filmmakers the flexibility needed to capture clear, quality speech and ambience in a variety of situations. Its sensitive condenser capsule can be switched between cardioid and supercardioid polar patterns to control the directional characteristics for enhanced rear- or side-facing rejection.

The VDS-M1's alloy-constructed housing provides the benefits of light weight and resistance to RF interference. Connect its XLR 3-pin output to an external mic preamp and run it on phantom power, or use the supplied XLR to 3.5mm cable and 1/4" adapter to plug the mic into a camera or mixer while powering it via a single AA battery. A foam windscreen is included to help reduce wind noise.

Cardioid Polar Pattern
Cardioid mode allows the mic to pick up the sound source it is pointed at. Its heart-shaped response type enable rich, natural sound while rejecting background noise behind the mic.
Supercardioid Polar Pattern
Supercardioid is a more directional mode that rejects ambient noise from the sides of the microphone to provide focused pickup of the source. It offers increased isolation from extraneous sound and elevated resistance to feedback.
Electrostatic Condenser Head
The VDS-M1's condenser capsule is highly sensitive, so it can capture low-level sounds while maintaining low self-noise.
Alloy Construction
The durable alloy-constructed VDS-M1 protects inner components and eliminates RF-induced mic noise, thus enhancing overall audio recording quality.
XLR Output
Its balanced XLR 3-pin output connector excels in long-distance signal transmission, allowing the mic to work in wired or wireless configurations.
Wide Compatibility
The VDS-M1 includes an XLR to 3.5mm microphone cable and a 3.5mm to 1/4" adapter. As a result, it can be used with an array of devices such as cameras, camcorders, computers, portable recorders, mixers, and more.
Two Power Options
Power the mic via phantom power (9 to 52 VDC) or with the supplied AA battery.
Wind Protection
Slip the supplied foam windscreen over the mic to reduce wind noise.

Godox VIRSO M1

Overview


Capture audio from compatible cameras, smartphones, or other recording devices all day using the Virso M1 Wireless Microphone System from Godox. The system includes one clip-on transmitter with a built-in omnidirectional microphone and a dual-channel receiver with 3.5mm TRS connectivity. Functions like a -6 dB safety track and a microSD card slot on the transmitter unit for backup recording offer safeguards for unforeseen audio clips or environmental disturbances. The system also includes an omnidirectional lavalier microphone, furry windscreen, 3-in-1 USB cable, 3.5mm TRS cable, 3.5mm TRS to TRRS cable, and a storage pouch to take it on the go.


Wide Device Compatibility
The 3.5mm TRS output on the receiver unit can be used with the included cables and record audio to your DSLR/mirrorless camera, compatible smartphone, or other audio recorder.
A built-in back clip on the receiver can attach to your cinematographer or slide into any cold shoe mount to turn the unit into a camera-mountable device.

Clip-On Transmitter with Onboard Recording
An integrated omnidirectional microphone and a 3.5mm TRS input for the included lavalier microphone can capture crisp audio in your next vlog. Record onboard backup audio files using the microSD card slot, which supports cards up to 256GB and 400 hours of recordings. Onboard LED indicators show power, connectivity, and recording status. An integrated back clip easily attaches the transmitter to your talent's lapel.

Dual-Channel Receiver with Display
The dual-channel receiver is capable of capturing both mono and stereo audio channels. Expand your system into a 2-person configuration by purchasing a secondary transmitter unit (available separately). Onboard controls and an integrated display allow you to view parameters like your transmitter's power status and signal strength, as well as toggle denoise, mute, or the -6 dB safety track recording. The screen rotates for maximum visibility no matter the mounting position.

Long Transmission Distance
The system's 2.4 GHz frequency-hopping technology extends communication between units up to 656', making it ideal for outdoor applications or larger studio spaces.

Onboard Control Functions
Denoise
One-press mute
Screen rotation
One-press pairing
Mono/stereo mode
Volume

Godox VIRSO M2 Overview


Capture audio from compatible cameras, smartphones, or other recording devices all day using the Virso M2 2-Person Wireless Microphone System from Godox. The system includes two clip-on transmitters with built-in omnidirectional microphones and a dual-channel receiver with 3.5mm TRS connectivity. Functions like a -6 dB safety track and microSD card slots on the transmitter units for backup recording offer safeguards for unforeseen audio clips or environmental disturbances. The system also includes two omnidirectional lavalier microphones, furry windscreens, 3-in-1 USB cable, 3.5mm TRS cable, 3.5mm TRS to TRRS cable, and a charging case to replenish the components.


Wide Device Compatibility
The 3.5mm TRS output on the receiver unit can be used with the included cables and record audio to your DSLR/mirrorless camera, compatible smartphone, or other audio recorder.
A built-in back clip on the receiver can attach to your cinematographer or slide into any cold shoe mount to turn the unit into a camera-mountable device.

Clip-On Transmitters with Onboard Recording
Integrated omnidirectional microphones and 3.5mm TRS inputs for the included lavalier microphones can capture crisp audio in your next 2-person interview. Record onboard backup audio files using the microSD card slots, which support cards up to 256GB and 400 hours of recordings. Onboard LED indicators show power, connectivity, and recording status. Integrated back clips easily attaches each transmitter to your talent's lapel.

Dual-Channel Receiver with Display
The dual-channel receiver is capable of capturing both mono and stereo audio channels. Onboard controls and an integrated display allow you to view parameters like your transmitter's power status and signal strength as well as toggle denoise, mute, or the -6 dB safety track recording. The screen rotates for maximum visibility, no matter the mounting position.

About Godox WH-M1

Godox's WH-MI is a handheld wireless transmitter that's ready to work with your WMicS1 wireless system. Featuring UHF, the WMicS1 wireless system helps to avoid ambient sound or feedback. Built to withstand the rigors of live performance , this handheld transmitter is truly a reliable choice for interview, meeting and lecture, or any other application that requires mobility plus a clear sound.

Extended UHF Range
UHF wireless system works to minimie pick-up of unwanted noise.96 compatible channels give more options to bypass signal interferences or dropouts.

Rock-Solid Construction
Designed to fit comfortably in hand, this all-metal transmitter provides a rugged dependability.

One-Click Mute
For public speaking applications, an integrated mute switch eliminates unwanted sounds when mic is not in use.

Easy-to-Read Display
High visibility OLED display lets you see the operating co ditions accurately in real time, even under bright sunlight.

Extended Duration
Powered by 2 AA batteries, the WH-MI can works up to 8 hours, letting you to concentrate on your delivery.