Key Features
40MP APS-C X-Trans5 BSI Sensor
7-Stop In-Body Image Stabilization
8K 30p, 4K 60p, FHD 240p 10-Bit Video
5.76m-Dot OLED Electronic Viewfinder
160MP Pixel Shift Multi-Shot
20 fps E-Shutter, 15 fps Mech. Shutter
CFexpress Type B & SD UHS-II Card Slots
ProRes Raw, Blackmagic Raw via HDMI
Intelligent Hybrid Autofocus

FUJIFILM X-H2: Life in Detail
Pushing the boundaries of APS-C imaging, the FUJIFILM X-H2 is a high-resolution mirrorless crop-sensor camera featuring a groundbreaking 40MP BSI sensor and an arsenal of cutting-edge features packed into a small and durable X-series body. Standing atop the X-System lineup, this high performing camera inherits many of the GFX system's advances in digital capture technology to provide image quality, detail, and color rendition never before seen in a crop-sensor camera, while retaining its characteristic compact form factor and sleek design that has garnered the X-System a loyal following worldwide.
Ideal for architectural, travel, and landscape photographers, the X-H2 sports a backside-illuminated, APS-C-format 40MP X-Trans 5 HR sensor, which ups the resolution and improves low-light performance compared to previous generations. First, as an X-Trans sensor, it uses the unique color filter array that inherently minimizes moiré and contributes to more natural color rendering; next, the BSI design helps reduce noise and improve tonality and clarity; and, finally, the design greatly reduces rolling shutter and other motion distortion to better suit high-speed video and photo applications. The remarkable resolution allows for 2x digital zoom and has up to 13 stops of dynamic range.
Partner to the newly designed sensor is a fresh engine—the X-Processor 5—which uses 64-bit processing to realize 3x faster speeds for both video and photo tasks compared to the X-T4. On the video side, this enables recording at bit rates of up to 720 mb/s.
On the stills end, this quick processing means faster shooting to suit photographing moving subjects. When working with an electronic shutter, shooting at up to 20 fps is possible, with a buffer of 202 consecutive uncompressed raw frames. With the mechanical shutter, shooting speeds of up to 15 fps are possible, along with the ability to shoot upwards of 1000 raw frames in a single burst.

Benefitting both video and stills applications, this processing also benefits the sophisticated and AI-backed autofocus system, helps achieve a 14-stop dynamic range, and enables an enhanced sensitivity range from ISO 125-12800.

Key Features
All-in-One Adventure & Photo Pack
Medium Core Unit for Photo Gear
Holds a Mirrorless or DSLR with Lens
Multiple Access Points for Versatility
Multiple Pockets and Laptop Sleeve
Pocket for 3L Hydration Pack
Tripod/Water Bottle Pockets
Large Front Panel Pocket
Adjustable Harness & Strap System
Lightweight and Strong Ripstop Nylon
The black Explore v2 30 Backpack Photo Starter Kit from Shimoda Designs is the mid-size model in their flagship line of camera backpacks, and this kit includes their medium Core Unit that is designed to hold cameras like the Fuji X-T4 and Sony a7 series but can accommodate a Canon 5D or similar sized camera. This versatile, multiuse bag

Key Features
All-in-One Adventure & Photo Pack
Includes Small Mirrorless Core Unit
Holds a Mirrorless Camera and Lens
Multiple Access Points for Versatility
Multiple Pockets and Laptop Sleeve
Pocket for 3L Hydration Pack
Tripod/Water Bottle Pockets
Large Front Panel Pocket
Adjustable Harness & Strap System
Lightweight and Strong Ripstop Nylon
The black Explore v2 25 Backpack Photo Starter Kit from Shimoda Designs is the smallest model in their flagship line of camera backpacks, and this kit includes their small Core Unit that is designed to hold cameras like the Fuji X-T4 and Sony a7 series but can accommodate a Canon 5D or similar-sized camera.

Mirrorless/DSLR Body Fit - The Mirrorless depth is ideal for mirrorless and non-gripped DSLR cameras up to 12 cm (4.7 in) tall, and the shorter depth allows for more efficient packing scenarios and leads to a lower profile with your backpack. The Mirrorless size fits cameras like the Fuji X-T4 and Sony a7 series but it can also accommodate the similar dimensions of the Canon 5D.
Quick Side Camera Access - Integrates seamlessly with the side access of the Action X30 and X50 backpacks, but it will also fit in every available Shimoda backpack and roller
Modular Stacking - The Medium Mirrorless Core Unit V2 Unit allows a user the option to stack a Small Core Unit on top of the Medium -- creating similar volume to a Large insert. By doing this you can have greater range of owning both Medium and Small Core Units. For example: you have the option of using just the Small Unit, just a Medium Unit, or using both together to equal a Large Core Unit volume.
Lightweight Water-Resistant & Multi-purpose Skin - The included Skin’s primary function is a storage case for the padded Core Units, ideal for when your gear is at home and not in use. It keeps the Core Unit sealed and dust free. Its secondary function is to use as a packing cell. A user can fill it with clothing or other common items and pack it in their backpack or carry-on roller.
EVA Protective Shell and Dividers - Walls and dividers are constructed with EVA which ensures much greater protection than cheaper PE foams used in most camera bags. With EVA we have greater control over the density and quality of materials used to protect your gear. It also means our walls can be thinner and use less internal volume while still providing superior protection.

Key Features
Holds a Mirrorless with Zoom Lens
Use Inside Larger Packs and Luggage
EVA Foam Laminated Sidewalls & Dividers
Lightweight and Strong Aluminum Frame
Bright Interior Makes Finding Items Easy
Water-Resistant Multi-Purpose Skin
Use the Shimoda Designs Small Core Unit for Mirrorless Camera to add modular camera storage to just about any bag or piece of luggage. This small unit will hold a mirrorless or non-gripped DSLR camera like the Fuji X-T4 and Sony a7 series but can accommodate a Canon 5D or similar size body.

Key Features
X-Mount Lens/APS-C Format
27-183mm (35mm Equivalent)
Aperture Control from Camera
Stepless Control from Select Cameras
Aperture Range: f/4 to f/22
Power Zoom Mechanism; Internal Zoom
Aspherical and ED Elements
Linear Autofocus Motor
Weather-Sealed & Front Fluorine Coating
Rounded 7-Blade Diaphragm
A standard zoom purpose-built for content creators and image-makers with a penchant for motion, the FUJIFILM XF 18-120mm f/4 LM PZ WR covers a versatile focal length range and features an inspired design for intuitive control over zoom, focus, and aperture adjustment from the camera body. This zoom is the first X Series lens built in collaboration with FUJINON cine and broadcast lens designers and is a go-to all-around lens choice for video and motion applications.
Designed for Motion
Featuring variable power zoom and smooth manual focus, and supporting stepless aperture control from select cameras, this 18-120mm enables precise, fine control over focus and exposure. Cameras already confirmed to be able to perform stepless aperture control for this lens include the FUJIFILM X-H2S, X-T4, X-T3, and X-S10.
Power zoom can easily and smoothly transition throughout the focal length range. This mechanism can be controlled by a newly designed zoom lever, which offers variable zoom speeds.
Conventional focus ring allows direct and intuitive manual focus control and the lens offers seamless switching between continuous autofocus and manual focus. Requiring a camera firmware update, this unique control method opens up the possibilities for making creative focus transitions and control the focal point whenever required.
Two custom function buttons can be used to preset a constant zoom speed, focal length, or focus point.
Flexible Zoom and Advanced Optics
Spanning a useful wide-angle to mid-telephoto range, this zoom offers a 27-183mm equivalent focal length range to serve as a viable single lens solution for everyday shooting.
Constant f/4 maximum aperture offers consistent illumination throughout the zoom range, which pairs well with the constant nature of the focusing, AF, and zoom controls.
Three aspherical elements control distortions and spherical aberrations in order to produce sharper imagery with more accurate rendering.
Three extra-low dispersion elements greatly reduce chromatic aberrations and color fringing throughout the zoom range for a high degree of clarity and color accuracy.
Rounded seven-blade diaphragm contributes to a smooth, circular bokeh quality when using shallow depth of field and selective focus effects.
Intuitive Handling and Robust Construction
Benefitting its use on gimbal stabilization devices, this lens's internal zoom and internal focusing design helps to maintain consistent balance and overall lens length during use.
Despite the inclusion of a power zoom mechanism and a broad focal length range, this lens still weighs in at just about 1 lb, making for a lightweight design that helps maintain compatibility with a variety of stabilization tools.
Weather-resistant design protects against dust and moisture and cold temperatures down to 14°F.
Front fluorine coating protects against water, grease, dirt, and smudging, and also makes it easier to clean the front element.

Key Features
For FUJIFILM X-T4 Camera
Spare or Replacement Item
Dedicated to the FUJIFILM X-T4 mirrorless camera, the NP-W235 Rechargeable Lithium-Ion Battery is a spare or replacement item for the one originally included with the camera. The battery is compatible with the dedicated Twin Battery Charger or can be charged in-camera.

►Rock Solid One Piece L Plate.►Precisely Fits Fuji X-T4 Camera
►Allows Full Access to Battery & Ports.
►All Metal (Aircraft Grade Aluminum Alloy)
►Height 106mm. ►Length 150mm.►Weighs 156g
.►Includes Stowed Magnetic Screwdriver

For FUJIFILM GFX100, GFX100S, GFX50S II, GFX 50S, X-H2S, X-H1, X-T4, X-T3, X-T2, and X-T1
The EC-XT S Small Eyecup for Select FUJIFILM Cameras from FUJIFILM will fit directly onto the viewfinder of theGFX100, GFX100S, GFX50S II, GFX 50S, X-H2S, X-H1, X-T4, X-T3, X-T2, and X-T1 cameras. The eyecup blocks stray light, which creates glare and would make it difficult to see the image, from entering the camera's viewfinder.

This eyecup can be used as a replacement or as a spare, and it is thinner than what originally comes with the camera, which makes it easier to view for users that wear eyeglasses. At the same time, the thinner eyecup still protects your glasses from being scratched.

Very useful for changing orientation when mounting to a tripod. Good build quality as well. It does block the screen from rotating all the way out but its not too big a deal to get around.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 72mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-73 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select mirroless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-73 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-73 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-73 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 72mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 72mm.

The Wizard W-73 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
Nikon:
Z7 II
Z7
Z6 II
Z6
Z5

FUJIFILM
X-H2S
X-T5
X-T4
X-T3
X-T2
X-H1

Panasonic
S5

Leica
SL 2
SL

Olympus / OM System
EM1
OM1
EM5 III
EM5 II
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.