Key Features
26.1MP APS-C X-Trans Stacked BSI Sensor
4K 120p, 6.2K 30p, FHD 240p 10-Bit Video
Internal ProRes 422 HQ and F-Log 2
7-Stop In-Body Image Stabilization
5.76m-Dot OLED Electronic Viewfinder
3" 1.62m-Dot Vari-Angle Touchscreen LCD
40 fps E. Shutter, 15 fps Mech. Shutter
425-Pt. Hybrid AF, AI Subject Detection
ProRes & Blackmagic RAW via HDMI
CFexpress Type B & SD UHS-II Card Slots
Balancing strong photo and video capabilities, the FUJIFILM X-H2S is a multimedia mirrorless camera featuring a newly developed X-Trans stacked sensor, refined AF and subject detection, and impressive 6.2K video recording. Topping the X System, this camera mixes the intuitiveness, design, and image quality

Key Features
40MP APS-C X-Trans5 BSI Sensor
7-Stop In-Body Image Stabilization
8K 30p, 4K 60p, FHD 240p 10-Bit Video
5.76m-Dot OLED Electronic Viewfinder
160MP Pixel Shift Multi-Shot
20 fps E-Shutter, 15 fps Mech. Shutter
CFexpress Type B & SD UHS-II Card Slots
ProRes Raw, Blackmagic Raw via HDMI
Intelligent Hybrid Autofocus
XF 16-80mm f/4 R OIS WR Lens
Bundling the high-resolution mirrorless body with a versatile zoom, the FUJIFILM X-H2 Mirrorless Camera with 16-80mm Lens pairs the sleek camera body with the XF 16-80mm f/4 R OIS WR zoom lens.

Key Features
40MP APS-C X-Trans5 BSI Sensor
7-Stop In-Body Image Stabilization
8K 30p, 4K 60p, FHD 240p 10-Bit Video
5.76m-Dot OLED Electronic Viewfinder
160MP Pixel Shift Multi-Shot
20 fps E-Shutter, 15 fps Mech. Shutter
CFexpress Type B & SD UHS-II Card Slots
ProRes Raw, Blackmagic Raw via HDMI
Intelligent Hybrid Autofocus

FUJIFILM X-H2: Life in Detail
Pushing the boundaries of APS-C imaging, the FUJIFILM X-H2 is a high-resolution mirrorless crop-sensor camera featuring a groundbreaking 40MP BSI sensor and an arsenal of cutting-edge features packed into a small and durable X-series body. Standing atop the X-System lineup, this high performing camera inherits many of the GFX system's advances in digital capture technology to provide image quality, detail, and color rendition never before seen in a crop-sensor camera, while retaining its characteristic compact form factor and sleek design that has garnered the X-System a loyal following worldwide.
Ideal for architectural, travel, and landscape photographers, the X-H2 sports a backside-illuminated, APS-C-format 40MP X-Trans 5 HR sensor, which ups the resolution and improves low-light performance compared to previous generations. First, as an X-Trans sensor, it uses the unique color filter array that inherently minimizes moiré and contributes to more natural color rendering; next, the BSI design helps reduce noise and improve tonality and clarity; and, finally, the design greatly reduces rolling shutter and other motion distortion to better suit high-speed video and photo applications. The remarkable resolution allows for 2x digital zoom and has up to 13 stops of dynamic range.
Partner to the newly designed sensor is a fresh engine—the X-Processor 5—which uses 64-bit processing to realize 3x faster speeds for both video and photo tasks compared to the X-T4. On the video side, this enables recording at bit rates of up to 720 mb/s.
On the stills end, this quick processing means faster shooting to suit photographing moving subjects. When working with an electronic shutter, shooting at up to 20 fps is possible, with a buffer of 202 consecutive uncompressed raw frames. With the mechanical shutter, shooting speeds of up to 15 fps are possible, along with the ability to shoot upwards of 1000 raw frames in a single burst.

Benefitting both video and stills applications, this processing also benefits the sophisticated and AI-backed autofocus system, helps achieve a 14-stop dynamic range, and enables an enhanced sensitivity range from ISO 125-12800.

Precision Engineered for Fujifilm X-H2 & X-H2s
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum.
Fully Compatible with Arca-Swiss & RRS Clamps
Weight: 125g. Height 90mm. Length 143mm. Width 62mm.

Form fitting design
Designed specifically for the Fujifilm X-H2/X-H2s
Lightweight aircraft grade aluminium
Removable top handle
Multiple mounting points for accessories
Arca standard bottom rail
Alternative quick release plate for use on a gimbal or tripod head
Wrist strap
This full cage is specifically designed for the Fujifilm X-H2/X-H2S. It adds a lot of mounting points without getting in the way of the camera’s controls. Cameras are attached to the cage via 2 points for added stability and rubber pads are included to keep the camera free from scratches and damage.

A variety of accessories can be attached to the camera via 1/4-20″ threaded holes, ARRI 3/8″-16 locating holes, cold shoe mounts, NATO rails, quick release plates, etc. Two types of quick release plates are included for quick switching between handheld, tripod, and gimbal modes.​ The ergonomic wrist strap takes a lot of pressure off your hand whether shooting horizontally or vertically, and provides more stability for the user.​ The Cage weighs only 370g (with handle) so even with a lot of accessories attached, the whole setup remains portable for handheld shooting.

Magnetic tools including a flathead screwdriver and an M2 hex key are stored at the bottom. The handle comes with three cold shoe mounts and has an Allen key built into it. Safety pins help lock the handle securely to the cage

Compatibility:

Fujifilm X-H2

Fujifilm X-H2s

For FUJIFILM GFX100, GFX100S, GFX50S II, GFX 50S, X-H2S, X-H1, X-T4, X-T3, X-T2, and X-T1
The EC-XT S Small Eyecup for Select FUJIFILM Cameras from FUJIFILM will fit directly onto the viewfinder of theGFX100, GFX100S, GFX50S II, GFX 50S, X-H2S, X-H1, X-T4, X-T3, X-T2, and X-T1 cameras. The eyecup blocks stray light, which creates glare and would make it difficult to see the image, from entering the camera's viewfinder.

This eyecup can be used as a replacement or as a spare, and it is thinner than what originally comes with the camera, which makes it easier to view for users that wear eyeglasses. At the same time, the thinner eyecup still protects your glasses from being scratched.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 72mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-73 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select mirroless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-73 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-73 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-73 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 72mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 72mm.

The Wizard W-73 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
Nikon:
Z7 II
Z7
Z6 II
Z6
Z5

FUJIFILM
X-H2S
X-T5
X-T4
X-T3
X-T2
X-H1

Panasonic
S5

Leica
SL 2
SL

Olympus / OM System
EM1
OM1
EM5 III
EM5 II
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.