Key Features
1-2 DSLRs, 5-8 Lenses, Accessories
Holds Laptop Up to 17"
Hip Belt
Quick-Access Side Door
Pivot-Fit Harness Straps
Crush-Proof Top Compartment
Tripod Carrier
Adjustable Trolley Strap
Water-Repellent Ripstop Exterior
WeatherWrap Rain Cover Included
The 32L Tenba Shootout Backpack holds one or two DSLR cameras and 5-8 lenses, plus a flash and other accessories. It has a large main compartment with padded dividers that are customizable to fit your gear. It can also hold a 17" laptop in its padded sleeve. For additional accessories, there are numerous exterior and interior pockets.

Pivot-Fit harness straps automatically adjust to the shape of your shoulders, and are covered in a moisture-wicking Lycra that moves friction-free over clothing. The bag's exterior is made from water-repellent ripstop nylon, helping to prolong the durability of the Shootout bag.

A quick-access side door allows a camera or lenses to be swapped out without removing the bag from your body. A side-access channel fits a DSLR camera with an attached 70-200mm 2.8 lens.
A full-length front pocket can hold equipment, or soft items such as clothing or food. Micromesh side pockets provide storage for water bottles, or other easy-to-reach items.
An internal aluminum frame transfers weight to the hip belt and allows for load balancing.
A strap secures a tripod or monopod to the outside of the bag.
An adjustable trolley strap allows you to attach the bag to the handle of rolling luggage.
Dual front pockets fit small accessories, and include D-rings to tether media wallets. Windowpane mesh pockets hold accessories on the flap interior.
The included reversible and removable WeatherWrap rain cover is silver on one side to reflect the heat, and black on the other side for added stealth. Can be removed for complete cleaning and drying, and stows away neatly in a sleeve on the bottom. Can also be used as a ground cover.
The base of the bag is abrasion and moisture resistant.
Locking zipper sliders on both camera and laptop compartment can be secured with an optional luggage lock.
Accessory loops and D-rings on the harness straps for optional pouches and other attachments.
Compression straps prevent the load from shifting, and help keep the center of gravity as close to the body as possible.

Key Features
Two-Way Fluid Head with 58mm Flat Base
Can Be Mounted on Tripods, Sliders, Etc.
3/8"-16 Mounting Thread, 1/4"-20 Bushing
17.5 lb Payload
360° Pan, 60 to -90° Tilt Movement
Spring-Loaded Counterbalance
Pan Bar Attachable to Either Side
Camera Plate with Engraved Markings
Bubble Level
Secure Locking System
The Vanguard ALTA PH-123V Magnesium Alloy Video Head is a compact and lightweight two-way fluid head with a 58mm flat base. It supports up to 17.5 lb and can be directly mounted on a variety of support products thanks to the flat base. Attach it to tripods, monopods, sliders, and other gear via the 3/8"-16 threaded mounting hole on the bottom or using an included 3/8"-16 to 1/4"-20 bushing.

The head provides 360° pan and 60 to -90° tilt movement and features an adjustable spring-loaded counterbalance system that ensures ideal balance for your tilt position. The counterbalance system is engaged at the flip of a switch. A pan bar is included that can be mounted on the left or right side, and a camera plate is included with both 1/4"-20 and 3/8"-16 mounting screws and a safety pin.

Pan/tilt two-way fluid head
58mm flat base with 3/8"-16 mounting thread and 1/4"-20 bushing
17.5 lb payload
13.2 lb optimum load performance
360° pan and 60 to -90° tilt movement
Spring-loaded counterbalance
Pan bar attachable to either side
Camera plate with both 1/4"-20 and 3/8"-16 mounting screws and safety pin
Bubble level
Secure locking system
Safety camera release button

Key Features
Professional 3-Section Tripod, 75mm Bowl
Broadcast Quality Fluid Head
13.2 lb Payload
Includes Ground and Mid-Level Spreader
17-63" Tripod Working Height
Stepped Counterbalance
0-3 Grades of Pan and Tilt Drag
Includes Pan Bar
The Sirui BCT-2203 Carbon Fiber Tripod & BCH-10 Video Head Bundle features a professional 3-section tripod with a 75mm bowl and a broadcast quality fluid head with a 13.2 lb payload. The tripod includes a ground spreader and mid-level spreader and offers a 17-63" working height. The head comes with a pan bar and provides stepped counterbalance and 0-3 grades of pan and tilt drag.

Sirui BCT-2203 Professional 3-Section Carbon Fiber Video Tripod with 75mm Bowl
The BCT-2203 Professional 3-Section Carbon Fiber Video Tripod from Sirui features a 75mm bowl for compatible fluid heads and supports up to 22 lb loads. It offers a 17 to 63" height range and comes with ground and mid-level spreaders, both of which are removable. The ground spreader has a rubber underside for safer and more secure placement on flat surfaces. When the ground spreader is removed, dual-spiked feet are revealed for use on soft ground.

The 10-layer carbon fiber tripod is designed with multi-tube legs for enhanced stability and reduced vibration. Each leg is adjustable individually and secured with oversized twist leg locks that are easy to handle.

Key Features
75mm bowl
22 lb payload
17 to 63" height range
Removable ground and mid-level spreaders included
Dual-spiked feet
Multi-tube legs
Oversized twist leg locks
Sirui BCH-10 Video Head
For professional video applications, the Sirui BCH-10 Video Head is based off a 75mm ball mount for use on compatible tripod legs or other accessories such as sliders and jibs. Friction adjustment can be applied in 3 steps, with the 0 setting providing nearly-frictionless movement. A 3-step adjustable counterbalance can compensate for cameras weighing up to 13 pounds. The rosette-mounted pan handle easily extends for greater leverage and a second rosette on the side can be used to mount a second handle. The calibrated camera platform secures the camera plate with dual locks, preventing the camera from accidentally falling off the head during adjustment. To save time when balancing your camera, the platform is etched with calibrated measurements. Aluminum alloy is used in the construction for durability while maintaining a manageable weight.

Features
3 levels of friction control for panning and tilting, with 0 position for near-frictionless operation
3 levels of counterbalance adjustment
Dual bubble levels: Illuminated base bubble level and second top bubble level
Dual Safety Lock Quick Release Platform: Prevents the camera from sliding off the head while aligning for proper balance
Calibrated Quick Release Platform: Easily reposition your equipment using the etched scale on the platform
Telescoping handle
Integrated 75mm ball mount
Separate pan and tilt-lock knobs
Quick-release plate included

Key Features
Professional Heavy-Duty 3-Section Tripod
100mm Bowl
Broadcast Quality Fluid Head
39.5 lb Payload
Includes Ground and Mid-Level Spreader
17.5-63" Tripod Working Height
Stepped Counterbalance
0-7 Grades of Pan and Tilt Drag
Dual Pan Bars
The Sirui BCT-3203 Carbon Fiber Tripod & BCH-30 Video Head Bundle features a professional, heavy-duty 3-section tripod with a 100mm bowl and a broadcast quality fluid head with a 39.5 lb payload. The tripod includes a ground spreader and mid-level spreader and offers a 26.5-59" working height. The head comes with two pan bars and provides stepped counterbalance and 0-7 grades of pan and tilt drag.

Sirui BCT-3203 Professional 3-Section Carbon Fiber Video Tripod with 100mm Bowl
The BCT-3203 Professional 3-Section Carbon Fiber Video Tripod from Sirui features a 100mm bowl for compatible fluid heads and supports up to 40 lb loads. It offers a 17.5 to 63" height range and comes with ground and mid-level spreaders, both of which are removable. The ground spreader has a rubber underside for safer and more secure placement on flat surfaces. When the ground spreader is removed, dual-spiked feet are revealed for use on soft ground.

The 10-layer carbon fiber tripod is designed with multi-tube legs for enhanced stability and reduced vibration. Each leg is adjustable individually and secured with oversized twist leg locks that are easy to handle.

Key Features
100mm bowl
40 lb payload
17.5 to 63" height range
Removable ground and mid-level spreaders included
Dual-spiked feet
Multi-tube legs
Oversized twist leg locks
Sirui BCH-30 Video Head
For professional video applications, the Sirui BCH-30 Video Head is based off a 100mm ball mount for use on compatible tripod legs or other accessories such as sliders and jibs. Friction adjustment can be applied in 7 steps, with the 0 setting providing nearly-frictionless movement. A 13-step adjustable counterbalance can compensate for cameras weighing up to 39 pounds. The BCH-20 is controlled with dual rosette-mounted pan handles. Both pan handles easily extend for greater leverage when using heavier cameras. Extra camera-mount screws are kept in 1/4"-20 and 3/8"-16 tapped holes on the sides of the head. When vacated, these holes can also be used as accessory mounting points. The calibrated camera platform secures the camera plate with dual locks, preventing the camera from accidentally falling off the head during adjustment. To save time when balancing your camera, the platform is etched with calibrated measurements. Aluminum alloy is used in the construction for durability while maintaining a manageable weight.

Features
7 levels of friction control for panning and tilting, with 0 position for near-frictionless operation
13 levels of counterbalance adjustment
Dual bubble levels: Illuminated base bubble level and second top bubble level
Dual Safety Lock Quick Release Platform: Prevents the camera from sliding off the head while aligning for proper balance
Calibrated Quick Release Platform: Easily reposition your equipment using the etched scale on the platform
Dual telescoping handles
Extra 1/4" and 1/8" screws stored in the integrated threads
Integrated 100mm ball mount
Separate pan and tilt-lock knobs
Quick-release plate included

Professional carbon fiber photography slide

The new GVM-GP-80FW is a professional carbon fiber photography slide with flywheel. It supports up to 11 pounds of load and provides 31″ travel distance. The upgraded version of fluid damping is a very practical core technology: it can run at constant speed only by hand. Even the new photographer can easily use it, and the actual picture quality is quite stable.

Key Features
11 lb Load Capacity
23" Sliding Range
Aluminum Alloy Construction
1/4"-20 and 3/8"-16 Screw Holes
Vertical, Horizontal, and 45° Shooting
Non-Slip Feet
Camera Platform Lock
Controller
Lithium-Ion Battery Pack and Charger
Carrying Bag
The 23" Professional Video Aluminum Alloy Motorized Camera Slider from GVM is a lightweight slider designed for video recording and time-lapse photography. It supports loads up to 11 lb and features 1/4"-20 and 3/8"-16 screw holes for use on the floor, on the table, or via a ball head connected to the camera. It supports vertical, horizontal, and 45° shooting. A controller, lithium-ion battery, battery charger, and carrying bag are included.

Designed for wedding/event photography, studio, and film/video recordings
You can attach the tilt head to the dolly, adjust the slide and tilt head for straight horizontal shots, and find the balance quickly with the built-in precision spirit level
Suitable for all high-performance DSLRs, mirrorless, bridge, and video cameras, and other photographic equipment
Total number of photos calculated based on the time
When using time-lapse photography, you can check the remaining number of shots
Conveyor belt
Non-slip feet
Camera platform lock

Key Features
46" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 48" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 46" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Key Features
Wireless Programmable Motorized Slider
Robust 31" Portable Travel Slider
Carbon Fiber Rails
Supports up to 5.5 lb
1/4"-20 and 3/8"-16 Tripod Mounting
Hot Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
Integrated Display on Remote Controller
The 31" GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider is a motorized slider you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of slider travel. The slider carriage has a built-in bubble level, so you can check that your setup is level. Built-in feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot-swap for uninterrupted use. The two included NP-F750 type batteries will run the system for approximately 10 hours. The remote features an integrated display and during time-lapse moves can be turned off to save battery power.

Remote Controller
The wireless controller features its own internal battery and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest

1/4″ and 3/8″ Screw. Motorized camera sliders with 1/4 “and 3/8” tapped holes can be mounted on a tripod or light stand to support multiple angles.

It can also be used on feet and height-adjustable floors.

Multi-target Switching

With 2 axes (horizontal, tilt, and rotation), you can easily switch shooting targets, and also make a smooth transition between these targets as the slider moves.

Multi-angle Shooting with High Load Capacity

The camera slider is compatible with light stands or camera tripods for shooting at different angles.

Moreover, it has a load capacity of up to 11 pounds, which makes horizontal and vertical shooting smoother.

Powered by AC adapter or NP F750 battery (not included). In time-lapse mode, the battery may last for nearly 10 hours
GVM 2D 2-Axis Wireless Carbon Fiber Motorized Slider

1x Motorized Slider

1 x Controller

x Battery

2 x Battery Charger

1 x Controller Connection Line

6 x Shutter Link

1 x Shutter Extension Line

1 x Carrying Bag

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
The 32″ ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31″ of travel.

The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.

You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:

DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the move

Remote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting

The slider can traverse the 31″ sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Black
Brand GVM Great Video Maker
Compatible Devices Camcorder, Camera
Item Dimensions LxWxH 48 x 7.5 x 4 inches
Item Weight 11 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
【High quality motorized slider】-this 49”, 120cm motorized camera slider is made of carbon fiber with a stable carriage assembly and remote controller for improved strength, efficiency, ease of operation, repeatability and flexibility.
【3 shooting modes】-can achieve horizontal/tracking /120º panoramic shooting via adjusting the rod position to get multi-angle shootings effects.The rod position of tracking shooting is up-left & down-right; Panorama shooting is down-left & up-right; horizontal shooting is the horizontal adjustment.
【2 menus of shooting】-one is video capture to make you have uniform motion speed at any time and auto round trip via set starting point and ending point, another is time lapse to get 1000 pieces photos at this time and can accurate step distance and auto round trip via set starting point and ending point.
【With multiple 1/4 "and 3/8" Screw ports 】-The motorized camera slider equipped with multiple 1/4 "and 3/8" Screw ports for installing on the Most of tripod, using the screw holes can vertical, horizontal and 45 degrees shooting.
【 6 shutter release Cable and 1 extension cable】-the motorized camera slider equipped 6 shutter line to compatible most kinds of camera, you can use the extension cable to solve the issue of the line not enough length.All-round to meet your Shooting needs and Improve the shooting Grade, making the shooting more professional and more shocking.

Color 32"/80cm
Brand GVM Great Video Maker
Compatible Devices Camera, Cellphone
Item Dimensions LxWxH 38 x 24 x 12 inches
Item Weight 10 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
SUPPORT MULTIPLE SHOOTING MODES: Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point. Set A/B Points and Time-Lapse Keyframes: Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images.
1 TO 100% ADJUSTABLE SLIDING SPEED: The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode, In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
WIRELESS IOS/ANDROID APP CONTROL: Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion.
1/4"-20 AND 3/8"-16 TRIPOD MOUNT THREADS: The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. 1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
BELT DRIVEN WITH BATTERY-POWERED MOTOR: The motor is positioned on one end of the slider and features a L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras.