Key Features
26.1MP APS-C X-Trans Stacked BSI Sensor
4K 120p, 6.2K 30p, FHD 240p 10-Bit Video
Internal ProRes 422 HQ and F-Log 2
7-Stop In-Body Image Stabilization
5.76m-Dot OLED Electronic Viewfinder
3" 1.62m-Dot Vari-Angle Touchscreen LCD
40 fps E. Shutter, 15 fps Mech. Shutter
425-Pt. Hybrid AF, AI Subject Detection
ProRes & Blackmagic RAW via HDMI
CFexpress Type B & SD UHS-II Card Slots
Balancing strong photo and video capabilities, the FUJIFILM X-H2S is a multimedia mirrorless camera featuring a newly developed X-Trans stacked sensor, refined AF and subject detection, and impressive 6.2K video recording. Topping the X System, this camera mixes the intuitiveness, design, and image quality

Key Features
X-Mount Lens/APS-C Format
27-183mm (35mm Equivalent)
Aperture Control from Camera
Stepless Control from Select Cameras
Aperture Range: f/4 to f/22
Power Zoom Mechanism; Internal Zoom
Aspherical and ED Elements
Linear Autofocus Motor
Weather-Sealed & Front Fluorine Coating
Rounded 7-Blade Diaphragm
A standard zoom purpose-built for content creators and image-makers with a penchant for motion, the FUJIFILM XF 18-120mm f/4 LM PZ WR covers a versatile focal length range and features an inspired design for intuitive control over zoom, focus, and aperture adjustment from the camera body. This zoom is the first X Series lens built in collaboration with FUJINON cine and broadcast lens designers and is a go-to all-around lens choice for video and motion applications.
Designed for Motion
Featuring variable power zoom and smooth manual focus, and supporting stepless aperture control from select cameras, this 18-120mm enables precise, fine control over focus and exposure. Cameras already confirmed to be able to perform stepless aperture control for this lens include the FUJIFILM X-H2S, X-T4, X-T3, and X-S10.
Power zoom can easily and smoothly transition throughout the focal length range. This mechanism can be controlled by a newly designed zoom lever, which offers variable zoom speeds.
Conventional focus ring allows direct and intuitive manual focus control and the lens offers seamless switching between continuous autofocus and manual focus. Requiring a camera firmware update, this unique control method opens up the possibilities for making creative focus transitions and control the focal point whenever required.
Two custom function buttons can be used to preset a constant zoom speed, focal length, or focus point.
Flexible Zoom and Advanced Optics
Spanning a useful wide-angle to mid-telephoto range, this zoom offers a 27-183mm equivalent focal length range to serve as a viable single lens solution for everyday shooting.
Constant f/4 maximum aperture offers consistent illumination throughout the zoom range, which pairs well with the constant nature of the focusing, AF, and zoom controls.
Three aspherical elements control distortions and spherical aberrations in order to produce sharper imagery with more accurate rendering.
Three extra-low dispersion elements greatly reduce chromatic aberrations and color fringing throughout the zoom range for a high degree of clarity and color accuracy.
Rounded seven-blade diaphragm contributes to a smooth, circular bokeh quality when using shallow depth of field and selective focus effects.
Intuitive Handling and Robust Construction
Benefitting its use on gimbal stabilization devices, this lens's internal zoom and internal focusing design helps to maintain consistent balance and overall lens length during use.
Despite the inclusion of a power zoom mechanism and a broad focal length range, this lens still weighs in at just about 1 lb, making for a lightweight design that helps maintain compatibility with a variety of stabilization tools.
Weather-resistant design protects against dust and moisture and cold temperatures down to 14°F.
Front fluorine coating protects against water, grease, dirt, and smudging, and also makes it easier to clean the front element.

Key Features
For X-H2S Camera
Active Cooling Fan
Enables Longer Recording Times
Dedicated to the FUJIFILM X-H2S, the FAN-001 Cooling Fan attaches to the back of the camera body, when the screen is flipped out, and serves as an active cooling system for the camera to reduce the chance of overheating. This fan is especially useful when recording longer takes and working in warmer climates.

Precision Engineered for Fujifilm X-H2 & X-H2s
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum.
Fully Compatible with Arca-Swiss & RRS Clamps
Weight: 125g. Height 90mm. Length 143mm. Width 62mm.

Form fitting design
Designed specifically for the Fujifilm X-H2/X-H2s
Lightweight aircraft grade aluminium
Removable top handle
Multiple mounting points for accessories
Arca standard bottom rail
Alternative quick release plate for use on a gimbal or tripod head
Wrist strap
This full cage is specifically designed for the Fujifilm X-H2/X-H2S. It adds a lot of mounting points without getting in the way of the camera’s controls. Cameras are attached to the cage via 2 points for added stability and rubber pads are included to keep the camera free from scratches and damage.

A variety of accessories can be attached to the camera via 1/4-20″ threaded holes, ARRI 3/8″-16 locating holes, cold shoe mounts, NATO rails, quick release plates, etc. Two types of quick release plates are included for quick switching between handheld, tripod, and gimbal modes.​ The ergonomic wrist strap takes a lot of pressure off your hand whether shooting horizontally or vertically, and provides more stability for the user.​ The Cage weighs only 370g (with handle) so even with a lot of accessories attached, the whole setup remains portable for handheld shooting.

Magnetic tools including a flathead screwdriver and an M2 hex key are stored at the bottom. The handle comes with three cold shoe mounts and has an Allen key built into it. Safety pins help lock the handle securely to the cage

Compatibility:

Fujifilm X-H2

Fujifilm X-H2s

For FUJIFILM GFX100, GFX100S, GFX50S II, GFX 50S, X-H2S, X-H1, X-T4, X-T3, X-T2, and X-T1
The EC-XT S Small Eyecup for Select FUJIFILM Cameras from FUJIFILM will fit directly onto the viewfinder of theGFX100, GFX100S, GFX50S II, GFX 50S, X-H2S, X-H1, X-T4, X-T3, X-T2, and X-T1 cameras. The eyecup blocks stray light, which creates glare and would make it difficult to see the image, from entering the camera's viewfinder.

This eyecup can be used as a replacement or as a spare, and it is thinner than what originally comes with the camera, which makes it easier to view for users that wear eyeglasses. At the same time, the thinner eyecup still protects your glasses from being scratched.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 72mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-73 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select mirroless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-73 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-73 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-73 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 72mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 72mm.

The Wizard W-73 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
Nikon:
Z7 II
Z7
Z6 II
Z6
Z5

FUJIFILM
X-H2S
X-T5
X-T4
X-T3
X-T2
X-H1

Panasonic
S5

Leica
SL 2
SL

Olympus / OM System
EM1
OM1
EM5 III
EM5 II
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.