Key Features
Load Capacity: 6.6 lb
Maximum Height: 60.4"
Minimum Height: 8.6"
Folded Length: 20.2"
Leg Sections: 4
Aluminum-Constructed Legs
Flip Leg Lock System
Fluid System for Smooth Pans and Tilts
Spring-Assisted Counterbalance
TY-70A Quick-Release Plate
Gain the advantage of using the ET-2004 Aluminum Tripod with VA5 Video Head Kit from Sirui, where features from both the photo and video worlds combine into one tripod. With the quickness of the tripod's flip leg lock system and the compact size of the fluid head, you can be ready to go and capture video at a moment's notice.

Sirui VA-5 Ultra-Compact Video Head
The SIRUI VA-5 Ultra-Compact Video Head uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 6.6 lb. It features independent pan and tilt locks and uses an internal spring-assisted counterbalance mechanism for smoother tilt movements with heavier cameras. A TY-70A quick-release plate comes included, for forward/backward adjustment possible when attached to the head to help balance your camera. A dual safety lock system prevents the plate and your camera from falling off the head when the primary locking mechanism is loosened. To release the plate, simply press the secondary release button. To assist in horizontal alignment of your shots, the head has two bubble levels: one on the base of the head to align the tripod and one on the top of the head to align the camera. One pan handle comes included.

For DSLRs or compact video cameras up to 6.6 lb
Fluid system for smooth pan and tilts
Internal spring-loaded counterbalance mechanism
Quick-release plate with forward/backward adjustment
Dual safety lock system prevents plate from slipping off head
Two bubble levels: one at base of head, one a top of head
Accepts SIRUI TY-50/60/70/70-2 and LP-40/75 and many Arca-compatible quick release plates
Sirui ET-2004 Travel Aluminum Tripod
The ET-2004 Travel Aluminum Tripod from Sirui is a 4-section support with a flip leg lock system that you can disengage to give you the ability to extend the legs along with the standard rapid center column to a maximum height of 57.1". With its three variable leg angles and independent leg spread, the tripod's legs can conform to uneven terrain; splaying the tripod's legs out and switching the standard center column to the included short column, the support can go to a minimum height of 5.3". The legs fold in the reverse to a compact 16.9" to travel with the tripod, and the rubber feet on the legs prevent the tripod from sliding on smooth and flat surfaces. In addition, the feet retract back to reveal metal spikes to further stabilize the support on softer terrain.

Key Features
Knobs for Pan, Tilt & Tension
55 lb Load Capacity
Quick Release Plate
Arca-Type Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-20x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-type clamp for the included quick release plate. The pan, tilt, and quick release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation.

The interior ball locking of the K-20x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 55 lb. The quick release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-type platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-20x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-type quick release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
66 lb Load Capacity
QR Plate with Anti-Twist Rubber Mat
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-30x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation, and the quick-release plate has a rubberized surface that prevents camera twist when it's tilted 90°.

The interior ball locking of the K-30x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 66 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-30x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
77 lb Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-40X Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation. There's also a video pin on the plate to keep camcorders from twisting.

The interior ball locking of the K-40X head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 77 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security and stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-40X is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Easily attachable and detachable, the SIRUI MP-AC-01 mobile phone clamp is compatible with quick release plates and photographic accessories via the built-in 1/4” accessory port for extensive mobile shoots. Need a quick phone setup without a scratch? With a simple press of the tension release button, the phone clamp with rubber cushion padded interior will automatically open to fit or release a mobile phone measuring 4 to 6 inches.

Specifications for the MP-AC-01

Size：：76x32x40mm/2.99 x1.26x1.57inches

Weight：40g/0.09lb

Max. Load Capacity：300g/0.66lbs

Key Features
Works as a Tripod or Selfie Stick
Extends from 15.7 to 54.3" in Height
Supports up to 14.1 oz
Bluetooth Remote Works up to 32.8' Away
Includes Mobile Phone Clamp
Switch Between Portrait/Landscape Mode
Small and Compact
Small and compact, the MS-01K Umbrella Mobile Tripod from Sirui can be configured as either a tripod or a selfie stick. Its supports up to 14.1 oz, has a minimum height of 15.7", and can be extended up to 54.3". Its native mount is a GoPro head, but using the included mobile phone clamp, you'll be able to shoot with smartphones in portrait or landscape mode, and the included Bluetooth remote control works from up to 32.8' away.

General Features
Shoulderless Shooting
With a weight of 0.86 pounds, this can be easily held or shouldered while on the road.
Quick Switch for Extensive Shoots
The MS-01K can be easily configured as either a tripod or a selfie stick.
Break the Framing
Capture more with a smooth extension of the 5-section column to a maximum height of 54.3".
Flexible Angle Adjustments
Shoot at multiple angles with a gradual front or back tilting of the mounting platform. With one simple 90° tweak, you'll be able to capture photos in portrait or landscape mode.
Detachable Bluetooth Remote Shutter
Freeze the moment with a quick press of the Bluetooth remote control shutter from up to 32.8' away.
Solid Umbrella Base
The umbrella base smoothly slides up and down for fast setup.
A Reliable Companion
Get hands free with the leg spreader to shoot steady mobile video, whether recording or live streaming.

Key Features
Load Capacity: 33.1 lb
Maximum Height: 68.1"
Minimum Height: 9.1"
Folded Length: 24.6"
Leg Sections: 4
Weight: 4.5 lb
Aluminum-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The R2004 Aluminum Tripod with E-20 Ball Head set from Sirui combines the lightweight and portable R2004 aluminum leg set with the versatile E-20 ball head with Arca-type quick release system to form a compact and lightweight tripod that is equally at home in the studio or on location.

Sirui R2004 Aluminum Tripod
The 3.7 lb R2004 Aluminum Tripod from Sirui is a 4-section support with aluminum-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

Sirui E-20 Ball Head with TY-50E Plate
The E-20 Ball Head with TY-50E Plate from Sirui is a 12.7 oz aluminum camera support that features an Arca-type compatible quick release system. The head has two separate knobs, the larger knob unlocks to release the ball movement, and the independent pan lock releases the 360° panning base, which has 5° scale markings.

The weight capacity of the ball head is 26.5 lb, which makes it suitable to support large DSLR and medium format cameras. Furthermore, inside the clamp there is a safety stop and on the side of the clamp a security pin release button, which prevents the plate from accidentally sliding and falling out. The included TY-50E plate has a machined eyelet for a hand or shoulder strap.

Arca-type compatible ball head with safety stop and security pin release button
360° panning base with 5° scale increments
Integrated spirit bubble level for balancing
Machined eyelet on the quick release place for a hand or shoulder strap

Key Features
Load Capacity: 33.1 lb
Maximum Height: 64.2"
Minimum Height: 15.2"
Folded Length: 20.7"
Leg Sections: 4
Weight: 2.9 lb
Carbon Fiber-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The 2.9 lb R2204 Carbon Fiber Tripod from Sirui is a 4-section support with carbon fiber-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

SIRUI tripod for studio and large cameras - with center column and bag

The RX series tripods are the largest among the SIRUI tripods. With their high load capacity of 18 to 30kg, they are especially suitable for working in the studio and with large, heavy DSLR and video cameras.

The special feature of the R-2214X is the exchangeable mounting plate. It can be exchanged for the included 75mm adapter half-shell R2X-75A or the also included center column RX-402C. This way, for example, a SIRUI video head can be used on the tripod or the maximum working height can be increased by 38cm with the center column. To facilitate the change between plate and bowl or center column, an Allen key is integrated in the stabilizing hook.

The tubes of the legs are made of 10 layers of carbon, which makes the tripods extremely light but at the same time very stable. Depending on the surface, the non-slip rubber feet can be exchanged for robust stainless steel spikes (included).

- Carbon 10x carbon fiber in 4 sections
- incl. center column RX-402C and adapter half-shell R2X-75A
- center column reversible for ground level shooting
- mounting plate exchangeable against 75mm adapter half-shell or center column
- 3/8" screw for tripod heads, camera or camcorder
- Built-in leveling bubble in the tripod shoulder
- Fixation screw for tripod head
- Easy-action twist locks - half a turn is enough to loosen
- Protective handles for a secure grip in cold and heat
- Stabilizing hook with integrated Allen key

- Weight: 1,6kg (with center column 1,95kg)
- Max. Load Capacity: 18kg
- Height: 11.5 - 145cm (183cm with centre column)
- Pack Size: 51cm (with centre column 59cm)
- Tube Diameter: 18,6 - 29,4mm

Compatibility
Cameras, camcorders, tripod heads with 3/8" thread
SIRUI RX-75B levelling hemisphere

Included indelivery
1x SIRUI R-2214X tripod carbon
1x R2X-75A adapter hemisphere ø75mm
1x mounting plate ø63mm
1x RX-402C center column
3x stainless steel spike
1x carrying bag with strap
*Video head, levelling hemisphere not included in delivery

10-layer carbon fibre in 3 sections
Included centre column
Mounting plate can be swapped for 75mm half ball adapter
Built-in spirit level in the tripod shoulder
Smooth twist locks – a quarter turn is enough to loosen the section
Covers for secure grip in hot and cold conditions
Stabilising hook with integrated Allen key
Weight: 1.7kg
Max. load: 22kg
The RX series tripods are the largest of the SIRUI tripods. With their high load of up to 25kg, they are particularly suited to working in the studio and with large, heavy DSLR and video cameras. The special feature of the RX series is its removable mounting plate. It can be replaced with the 75mm half ball adapter (and can be used with the optional SIRUI Y-75B levelling half ball). This means that it can be used on a SIRUI video tilt head, for example. To make changing between the plate and the half ball easier, an Allen key is integrated into the stabilising hook.

The leg tubes are made from 10-layer carbon fibre, making the tripod extremely lightweight but very stable. Depending on the surface, the non-slip rubber feet can be replaced with robust stainless steel spikes (included).

– 10-layer carbon fibre in 3 sections
– Included carbon fibre centre column
– Mounting plate can be swapped for 75mm half ball adapter
– 3/8 inch screw for tripod heads, camera or camcorder
– Built-in spirit level in the tripod shoulder
– Locking screw for head
– Smooth twist locks – a quarter turn is enough to loosen the section
– Covers for secure grip in hot and cold conditions
– Stabilising hook with integrated Allen key

– Weight: 1.7kg
– Max. load: 22kg
– Height: 120mm – 1780mm
– Closed size: 61cm
– Tube diameter: 25.8 – 33mm

Compatibility
Cameras, camcorder, tripod heads with 3/8 inch thread

Included
1x SIRUI R-3213X tripod carbon fibre
1x Carbon Center column
1x RX-75A 75mm half ball adapter
3x Stainless steel spikes
1x Transport bag with strap
*Levelling half ball not included
* Video Head not included

Key Features
For Photo, Video & Film Production
Output: 700 Lux at 3.3'
2500–8000K CCT; RGB Mode
Local, DMX, and Bluetooth Control
CRI 97 | TLCI 97
14 Built-In Special Effects
Battery Power / AC Power
Versatile in form and function, the Telescopic RGB Tube Light from SIRUI expands the creative potential of any shoot with its adjustable length and full spectrum of color outputs. The tube light is built to extend from 2 to 4', while the RGB and hue, saturation, and intensity modes allow for precision color selection. The color temperature range spans from 2500K to 8000K with an additional green/magenta adjustment for blending with any ambient light situation. The light also features 14 built-in special effects including police car, broken bulb, and candle.

A companion iOS/Android app allows for full functional control of the light via your phone with Bluetooth from distances up to 49'. Connect and control light groups with the app or with dual 3.5mm DMX interfaces. The light is powered by an internal lithium-ion battery that lasts for up to 2.5 hours on a full charge. The light can also be used while connected to the included charging adapter. A 1/4"-20 thread on the bottom lets you mount the light on an optional mini tripod or other compatible support.

Key Features
18 to 29" Length Adjustment
360° Full Color RGB Mode
14 Built-In Special Effects
Music Mode: Reacts to Music or Sound
2500-8000K Color Temperature / 97 CRI
iOS/Android App & 2.4GHz Remote Control
Mounting Ring & 1/4"-20 Mounting Thread
Mini Tripod Included
Memory Function for Saving Settings
Integrated 2-Hour Battery
Not only a tube light but a telescopically adjustable one, the T60 Telescopic RGB LED Video Light from Sirui is highly portable and easily suitable for a wide range of applications. It telescopically adjusts from 18 to 29" in length. A 1/4"-20 thread on the bottom lets you mount the light on an included mini tripod or various other supports. On the opposite end is a pull-out ring for hanging the light on a hook or something similar. You can also use the light handheld.

Three operating modes and a companion iOS/Android app together allow you to simulate numerous lighting effects. Using the app, you can control all functions of the light from a distance. A 2.4GHz wireless remote control is also included. It comes attached to the grip handle of the light and is removable and works from up to 49' away. You can use it to control multiple units by assigning them to specified groups.

The color temperature is adjustable from a warm 2500K to a cool white 8000K, and color accuracy is up to 97 CRI/TLCI. The three operating modes are 360° full color RGB mode, effects mode, and music mode. Color mode lets you select any color from the color spectrum and adjust saturation and brightness. Effects mode offers 14 built-in special effects, such as flash, laser, candle, and fireworks. In music mode, the light reacts to music or sound, useful for music videos and other purposes. There's a pickup hole on the bottom of the light for this purpose.

The light features a memory function where you can save up to 20 dialed-in settings so that you can access them directly the next time around. The T60 is powered by an internal lithium-ion battery that runs up to two hours at full power. A charging adapter is included for recharging it in approximately 1.5 hours.

The T60 uses SMD RGB LEDs. Also, it's designed to ensure consistent light output with no flicker.

Key Features
For Film and Video Production
Output: 7000 Lux at 3.3' (5600K)
5600K CCT
AC and Optional Battery Power
Onboard, DMX, and Bluetooth App Control
CRI 96 | TLCI 98
Fan Cooled
Bowens S-Mount Compatibility
8 Built-In Lighting Effects
Compact and Lightweight Design
A compact and lightweight fixture for film and video production, this Sirui 150W Daylight LED Monolight features an impressively high output of 7000 lux at 3.3' and a daylight-balanced color temperature of 5600K. An independent control box lets you quickly change settings without touching the fixture itself, and the light can also be wirelessly controlled via the Sirui Light app. Additionally, for more advanced control methods, the control box is equipped with a 5-pin DMX input and output.

The light is designed with a Bowens S-mount for use with the included reflector and a wide range of other optional light modifiers, and eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding. For mounting on a light stand, a flexible yoke with two locking knobs let you rotate the fixture 360°, and a convenient hand strap is also included for on-the-fly and handheld use. Designed for indoor and outdoor setups, the light is equipped with an AC adapter and power cord for continuous use with mains power, and for location shoots the light can be conveniently powered by one V-mount battery.

Compact and lightweight design featuring consistent light output and excellent color reproduction.
Crafted from high-quality aluminum alloy for use in tough and demanding environments.
Independent control box to quickly change settings without touching the fixture itself.
Compatible with Sirui Light app for wireless operation.
DMX input and output for use with light boards.
Eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding.
Built-in fan to quietly dissipate heat.
Universally recognized Bowens S-mount compatible with a wide range of separately purchased light modifiers.
Compatible with optional V-mount batteries.

Key Features
For Film and Video Production
Output: 12,500 Lux at 3.3' (5600K)
5600K CCT
AC and Optional Battery Power
Onboard, DMX, and Bluetooth App Control
CRI 96 | TLCI 98
Fan Cooled
Bowens S-Mount Compatibility
8 Built-In Lighting Effects
Compact and Lightweight Design
A compact and lightweight fixture for film and video production, this Sirui 300W Daylight LED Monolight features an impressively high output of 12,500 lux at 3.3' and a daylight-balanced color temperature of 5600K. An independent control box lets you quickly change settings without touching the fixture itself, and the light can also be wirelessly controlled via the Sirui Light app. Additionally, for more advanced control methods, the control box is equipped with a 5-pin DMX input and output.

The light is designed with a Bowens S-mount for use with the included reflector and a wide range of other optional light modifiers, and eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding. For mounting on a light stand, a flexible yoke with two locking knobs let you rotate the fixture 360°, and a convenient hand strap is also included for on-the-fly and handheld use. Designed for indoor and outdoor setups, the light is equipped with an AC adapter and power cord for continuous use with mains power, and for location shoots the light can be conveniently powered by two V-mount batteries.

Compact and lightweight design featuring consistent light output and excellent color reproduction.
Crafted from high-quality aluminum alloy for use in tough and demanding environments.
Independent control box to quickly change settings without touching the fixture itself.
Compatible with Sirui Light app for wireless operation.
DMX input and output for use with light boards.
Eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding.
Built-in fan to quietly dissipate heat.
Universally recognized Bowens S-mount compatible with a wide range of separately purchased light modifiers.
Compatible with optional V-mount batteries.

Key Features
For Film and Video Production
Output: 11,500 Lux at 3.3' (5600K)
2800-7000K CCT
AC and Optional Battery Power
Onboard, DMX, and Bluetooth App Control
CRI 96 | TLCI 98
Fan Cooled
Bowens S-Mount Compatibility
12 Built-In Lighting Effects
Compact and Lightweight Design
A compact and lightweight fixture for film and video production, this Sirui 300W Bi-Color LED Monolight features an impressively high output of 11,500 lux at 3.3' and a color temperature range of 2800-7000K. An independent control box lets you quickly change settings without touching the fixture itself, and the light can also be wirelessly controlled via the Sirui Light app. Additionally, for more advanced control methods, the control box is equipped with a 5-pin DMX input and output.

The light is designed with a Bowens S-mount for use with the included reflector and a wide range of other optional light modifiers, and twelve built-in special lighting effects including lightning, flash, broken bulb, candle, fire, fireworks, CCT loop, impulse, welding, TV, blast, and SOS. For mounting on a light stand, a flexible yoke with two locking knobs let you rotate the fixture 360°, and a convenient hand strap is also included for on-the-fly and handheld use. Designed for indoor and outdoor setups, the light is equipped with an AC adapter and power cord for continuous use with mains power, and for location shoots the light can be conveniently powered by two V-mount batteries.

Compact and lightweight design featuring consistent light output and excellent color reproduction.
Crafted from high-quality aluminum alloy for use in tough and demanding environments.
Independent control box to quickly change settings without touching the fixture itself.
Compatible with Sirui Light app for wireless operation.
DMX input and output for use with light boards.
Twelve built-in special lighting effects including lightning, flash, broken bulb, candle, fire, fireworks, CCT loop, impulse, welding, TV, blast, and SOS..
Built-in fan to quietly dissipate heat.
Universally recognized Bowens S-mount compatible with a wide range of separately purchased light modifiers.
Compatible with optional V-mount batteries.

Key Features
Protect Items from Dust, Dirt, Humidity
Controllable Dehumidifying System
Easy-to-Read LCD Screen
Two Adjustable Shelves
Welded 1.2mm-Thick Steel Enclosure
Tempered Glass Door with Air-Tight Seal
Silent Running, Energy Efficient
A controllable environment for storing your photographic gear and other valuables, the HC-70 Electronic Humidity Control Cabinet from Sirui features an automatic dehumidifying system along with a durable construction for long-term safe-keeping of items. A bright LCD screen displays the interior humidity levels along with the inside temperature, in both °F and °C, for quickly monitoring the cabinet's conditions. The exterior is constructed from welded 1.2mm-thick steel and a tempered glass door, which features air-tight seals to also protect the cabinet's contents from exterior moisture and dust. This HC-70 cabinet measures 26.8 x 15.7 x 13.2" and features two adjustable shelves, which can be positioned depending on the size of the items you are storing, and the cabinet is lined with foam to protect items against scratching or impacts. Offering controlled environmental conditions for your delicate valuables, this cabinet helps to eliminate moisture, dust, and dirt for long-term storage of a variety of items.

Electronic humidity control system is ideal for long-term storage applications, including protecting valuables, jewelry, lenses, photographic and optical equipment, electronic products, and more.
Button control panel allows you to input specific interior conditions for storage.
Easy-to-read LCD screen displays percentage of humidity as well as interior temperature in °F/°C.
Two adjustable shelves can be positioned depending on the size of the items being stored.
Foam lined interior for added protection when storing delicate items.
Durable cabinet enclosure is constructed from welded 1.2mm-thick cold-rolled steel and the door is made from tempered glass.
Air-tight seal prevents dust or moisture from entering the cabinet.
Control system will maintain the relative humidity level for up to 24 hours after the power is shut off.
Dehumidifying system quickly controls humidity and temperature levels, is energy efficient, and silent running.
In the Box
Sirui HC-70 Electronic Humidity Control Cabinet
Power Cable
2 x Keys
2 x Shelves
4 x Shelf Brackets
3 x Shelf Mats

Introducing the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head: Elevate Your Photography Game with Unmatched Precision and Durability

The Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head is a masterpiece of engineering, designed to exceed the expectations of professional photographers and outdoor enthusiasts. This remarkable tripod and ball head combo offers unparalleled stability, exceptional waterproof capabilities, and precise control, allowing you to capture awe-inspiring images in any challenging environment.

Unrivaled Stability and Durability:

Crafted from premium carbon fiber material, the Sirui ST-124 tripod combines strength with lightweight construction, making it easy to carry without compromising stability. Its robust design allows for a maximum load capacity of up to 12 kilograms, ensuring that your camera and lenses remain secure and steady, even when shooting with heavy equipment. Say goodbye to shaky shots and welcome crystal-clear images that truly stand out.

Weatherproof Performance:

With the Sirui ST-124 tripod, adverse weather conditions are no longer an obstacle. This tripod is not just resistant to dust and dirt but waterproof, making it perfect for photographers who are constantly pushing their boundaries. Whether you’re shooting in the rain, near water bodies, or even in sandy environments, rest assured that your gear will remain safe and protected, allowing you to focus on capturing breathtaking moments.

ST-10X Ball Head for Precise Control:

The included ST-10X Ball Head is a testament to Sirui’s commitment to precision and excellence. With separate knobs for panning, friction control, and locking, you have full control over the movement of your camera. The Arca-Swiss compatible quick-release plate enables seamless attachment and detachment, ensuring swift camera adjustments on the go. The ST-10X Ball Head allows you to capture the perfect composition with ease, empowering your creative vision.the dual panning clamp and base allow for easy panorama shooting.

Versatility and Adaptability:

The Sirui ST-124 tripod is designed to adapt to any shooting scenario. Its four-section legs can be independently adjusted to three different angles, allowing for stable positioning on uneven terrain. The tripod also features a reversible center column, enabling you to achieve low-angle shots or even use it for macro photography. With its versatility, this tripod opens up endless possibilities for your creative exploration.

Ease of Use and Portability:

Setting up the Sirui ST-124 tripod is a breeze, thanks to its user-friendly design and quick-lock leg system. The twist locks ensure fast and secure leg extension and retraction, allowing you to focus on capturing the perfect shot. When it’s time to move or pack up, the tripod collapses to a compact size for easy transportation. Weighing just 1.6 kilograms, the ST-124 is incredibly lightweight, making it a trusted companion for photographers on the move.

Embrace the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head and elevate your photography game to new heights. With its unbeatable stability, exceptional weatherproof performance, precise control, and adaptability, this tripod is a must-have tool for professionals and adventurers alike. Don’t let challenging environments hinder your creativity—unleash your vision with confidence using the Sirui ST-124.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.6kg
– Max. load: 12kg
– Tripod height: 450mm – 1710mm
– Closed size: 570mm

Included
1x SIRUI ST-124 waterproof tripod carbon fibre
1x ST-10X Ball head with QR plate
1x Transport bag with strap



The Sirui ST-10X Ball Head are designed and built to the highest standards. The ST-10X ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 38mm
– Weight: 0.43kg
– Height: 85mm
– Load Capacity: 20kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Sirui ST-224 Waterproof Carbon Fiber Tripod with ST-20 Ball Head

Load Capacity: 15kg
Leg Sections: 4
Weight: 1.9kg
Ultra Low profile design
Triangle Center Column
Integrated Stainless Steel Spikes and Rubber Feet
ST-20 Ball Head

Knobs for Pan, Tilt & Tension
Panning clamp
550 grams
Aluminium knobs for added durability
35 kg Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui ST-224 Waterproof Carbon Fibre Tripod with ST-20 Ball Head is protected from water, dirt and dust. In addition, it has a newly designed locking mechanism for comfortable operation and a spirit level for accurate alignment. The tripod tubes are manufactured from 8-layer carbon fibre (reduced weight, increased stability, vibration-free). The centre column is made in a triangle shape to enhance rigidity and also allows for the profile of the tripod to be extremely low profile when folded. The legs have three ratchet positions to allow for different angles and extension. The tripod measures just 48cm when collapsed. Each leg is made of 4 sections with 3 sealed twist locks. Rubber feet and metal spikes ensure that the tripod is stable on any surface.

A stabilising hook on the centre column is a SIRUI standard and a transport bag. The bag strap can also be used as a tripod strap.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.9kg
– Max. load: 15kg
– Tripod height: 520mm – 1840mm
– Closed size: 610mm

Included
1x SIRUI ST-224 waterproof tripod carbon fibre
1x ST-20 Ball head with QR plate
1x Transport bag with strap



The Sirui ST-20 Ball Head are designed and built to the highest standards. The ST-20 ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 40mm
– Weight: 0.55kg
– Height: 90mm
– Load Capacity: 35kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Key Features
Load Capacity: 11 lb
Maximum Height: 55.1"
Minimum Height: 5.5"
Folded Length: 15.7"
Leg Sections: 4
Weight: 2.2 lb
Compact 180° Folding Legs
Anodized Aluminum Construction
Split and Reversible Center Column
Includes Arca-Type B-00 Ball Head
The black T-004SK Aluminum Tripod with B-00 Ball Head from Sirui is a 4-section support with anodized aluminum legs with magnesium leg sockets. Unlocking the twist locks with a simple turn enables you to extend the legs; with the rapid center column extended, you can achieve a maximum height of 55.1". With three variable leg angles, the legs splay out completely, and splitting the center column to a shorter half allows the tripod to sit at a minimum height of 5.5". Positioning the tripod back to a normal stance, you can reverse the column and now have your camera literally facing the ground. The tripod is capable of supporting camera gear weighing up to 11 lb. To store or carry the 2.2 lb tripod, the legs fold 180° to a compact 15.7". The B-00 Arca-type compatible head is included with the tripod.

Perfect Travel Tripod
Reverse-Folding Legs
Removable Center Column for Low-Angles
Arca-Type Compatible QR Plate
Includes Soft Case and Tools
Weighs only 1kg
The Sirui Traveler 5A Aluminium Tripod with 3T-35 Ball Head – small and compact, yet extremely stable.

This high-quality travel tripod from SIRUI offer secure support for your compact or system camera despite its compact design. It is easy to handle in any situation and can be packed into any bag. The legs can be folded up by 180° meaning that the tripod can be collapsed to a height of just 33cm. Each leg is made of 5 sections with 4 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces. Cold-weather grips are a SIRUI standard offering control in cold weather environments. The Traveler 5 Series features a removable centre column. The head can also be mounted directly onto the tripod shoulder, increasing stability. For additional stability, there is a small keyring with a carabiner underneath the tripod shoulders so you can mount additional weight.

Tripod specifications (Including Head)
• Material: Aluminium
• Extendible and removable centre column
• Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
• Legs fold up by 180°
• Sealed twist locks for secure support
• Carabiner for stabilising and cold weather grips
• Max. load: 4kg
• Height range – 15.5cm – 138cm
• Closed size: 33cm
• Tube diameter: 10 – 22mm
• Weight: 1kg
– Colour: black

Ball head specifications
– Material: Aluminium
– 360° panorama function – infinitely variable friction control
– Rubber release plate – size: 30x38mm
– Release plate with 1/4″ stainless steel screw – head with 3/8″ thread
– Safety Lock System – prevents the plate from accidentally slipping
– Vertical slot
– Max. load: 4kg
– Height: 70mm
– Base plate: ø37mm
– Weight: 172g (including plate)
– Colour: black

Included
1x SIRUI Traveler 5A tripod aluminium black
1x SIRUI 3T-35K ball head black
1x SIRUI TY-C10 release plate black
1x Transport case