Key Features
Load Capacity: 26.5 lb
Maximum Height: 3.9"
Weight: 12.7 oz
Arca-Type Compatible
360° Pan with Independent Pan Lock
5° Graduated Panning Base Scale
Plate Lock with Security Pin Release
Ball Head Constructed from Aluminum
Spirit Bubble Level
Machined Eyelet on the Plate for Strap
The E-20 Ball Head with TY-50E Plate from Sirui is a 12.7 oz aluminum camera support that features an Arca-type compatible quick release system. The head has two separate knobs, the larger knob unlocks to release the ball movement, and the independent pan lock releases the 360° panning base, which has 5° scale markings.

The weight capacity of the ball head is 26.5 lb, which makes it suitable to support large DSLR and medium format cameras. Furthermore, inside the clamp there is a safety stop and on the side of the clamp a security pin release button, which prevents the plate from accidentally sliding and falling out. The included TY-50E plate has a machined eyelet for a hand or shoulder strap.

Arca-type compatible ball head with safety stop and security pin release button
360° panning base with 5° scale increments
Integrated spirit bubble level for balancing
Machined eyelet on the quick release place for a hand or shoulder strap

Key Features
Load Capacity: 6.6 lb
Maximum Height: 60.4"
Minimum Height: 8.6"
Folded Length: 20.2"
Leg Sections: 4
Aluminum-Constructed Legs
Flip Leg Lock System
Fluid System for Smooth Pans and Tilts
Spring-Assisted Counterbalance
TY-70A Quick-Release Plate
Gain the advantage of using the ET-2004 Aluminum Tripod with VA5 Video Head Kit from Sirui, where features from both the photo and video worlds combine into one tripod. With the quickness of the tripod's flip leg lock system and the compact size of the fluid head, you can be ready to go and capture video at a moment's notice.

Sirui VA-5 Ultra-Compact Video Head
The SIRUI VA-5 Ultra-Compact Video Head uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 6.6 lb. It features independent pan and tilt locks and uses an internal spring-assisted counterbalance mechanism for smoother tilt movements with heavier cameras. A TY-70A quick-release plate comes included, for forward/backward adjustment possible when attached to the head to help balance your camera. A dual safety lock system prevents the plate and your camera from falling off the head when the primary locking mechanism is loosened. To release the plate, simply press the secondary release button. To assist in horizontal alignment of your shots, the head has two bubble levels: one on the base of the head to align the tripod and one on the top of the head to align the camera. One pan handle comes included.

For DSLRs or compact video cameras up to 6.6 lb
Fluid system for smooth pan and tilts
Internal spring-loaded counterbalance mechanism
Quick-release plate with forward/backward adjustment
Dual safety lock system prevents plate from slipping off head
Two bubble levels: one at base of head, one a top of head
Accepts SIRUI TY-50/60/70/70-2 and LP-40/75 and many Arca-compatible quick release plates
Sirui ET-2004 Travel Aluminum Tripod
The ET-2004 Travel Aluminum Tripod from Sirui is a 4-section support with a flip leg lock system that you can disengage to give you the ability to extend the legs along with the standard rapid center column to a maximum height of 57.1". With its three variable leg angles and independent leg spread, the tripod's legs can conform to uneven terrain; splaying the tripod's legs out and switching the standard center column to the included short column, the support can go to a minimum height of 5.3". The legs fold in the reverse to a compact 16.9" to travel with the tripod, and the rubber feet on the legs prevent the tripod from sliding on smooth and flat surfaces. In addition, the feet retract back to reveal metal spikes to further stabilize the support on softer terrain.

Key Features
Knobs for Pan, Tilt & Tension
55 lb Load Capacity
Quick Release Plate
Arca-Type Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-20x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-type clamp for the included quick release plate. The pan, tilt, and quick release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation.

The interior ball locking of the K-20x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 55 lb. The quick release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-type platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-20x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-type quick release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Load Capacity: 33.1 lb
Maximum Height: 68.1"
Minimum Height: 9.1"
Folded Length: 24.6"
Leg Sections: 4
Weight: 4.5 lb
Aluminum-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The R2004 Aluminum Tripod with E-20 Ball Head set from Sirui combines the lightweight and portable R2004 aluminum leg set with the versatile E-20 ball head with Arca-type quick release system to form a compact and lightweight tripod that is equally at home in the studio or on location.

Sirui R2004 Aluminum Tripod
The 3.7 lb R2004 Aluminum Tripod from Sirui is a 4-section support with aluminum-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

Sirui E-20 Ball Head with TY-50E Plate
The E-20 Ball Head with TY-50E Plate from Sirui is a 12.7 oz aluminum camera support that features an Arca-type compatible quick release system. The head has two separate knobs, the larger knob unlocks to release the ball movement, and the independent pan lock releases the 360° panning base, which has 5° scale markings.

The weight capacity of the ball head is 26.5 lb, which makes it suitable to support large DSLR and medium format cameras. Furthermore, inside the clamp there is a safety stop and on the side of the clamp a security pin release button, which prevents the plate from accidentally sliding and falling out. The included TY-50E plate has a machined eyelet for a hand or shoulder strap.

Arca-type compatible ball head with safety stop and security pin release button
360° panning base with 5° scale increments
Integrated spirit bubble level for balancing
Machined eyelet on the quick release place for a hand or shoulder strap

Key Features
Load Capacity: 33.1 lb
Maximum Height: 64.2"
Minimum Height: 15.2"
Folded Length: 20.7"
Leg Sections: 4
Weight: 2.9 lb
Carbon Fiber-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The 2.9 lb R2204 Carbon Fiber Tripod from Sirui is a 4-section support with carbon fiber-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

10-layer carbon fibre in 3 sections
Included centre column
Mounting plate can be swapped for 75mm half ball adapter
Built-in spirit level in the tripod shoulder
Smooth twist locks – a quarter turn is enough to loosen the section
Covers for secure grip in hot and cold conditions
Stabilising hook with integrated Allen key
Weight: 1.7kg
Max. load: 22kg
The RX series tripods are the largest of the SIRUI tripods. With their high load of up to 25kg, they are particularly suited to working in the studio and with large, heavy DSLR and video cameras. The special feature of the RX series is its removable mounting plate. It can be replaced with the 75mm half ball adapter (and can be used with the optional SIRUI Y-75B levelling half ball). This means that it can be used on a SIRUI video tilt head, for example. To make changing between the plate and the half ball easier, an Allen key is integrated into the stabilising hook.

The leg tubes are made from 10-layer carbon fibre, making the tripod extremely lightweight but very stable. Depending on the surface, the non-slip rubber feet can be replaced with robust stainless steel spikes (included).

– 10-layer carbon fibre in 3 sections
– Included carbon fibre centre column
– Mounting plate can be swapped for 75mm half ball adapter
– 3/8 inch screw for tripod heads, camera or camcorder
– Built-in spirit level in the tripod shoulder
– Locking screw for head
– Smooth twist locks – a quarter turn is enough to loosen the section
– Covers for secure grip in hot and cold conditions
– Stabilising hook with integrated Allen key

– Weight: 1.7kg
– Max. load: 22kg
– Height: 120mm – 1780mm
– Closed size: 61cm
– Tube diameter: 25.8 – 33mm

Compatibility
Cameras, camcorder, tripod heads with 3/8 inch thread

Included
1x SIRUI R-3213X tripod carbon fibre
1x Carbon Center column
1x RX-75A 75mm half ball adapter
3x Stainless steel spikes
1x Transport bag with strap
*Levelling half ball not included
* Video Head not included

Key Features
Load Capacity: 30.9 lb
Maximum Height: 70.3"
Max Height Without Center Column: 60.4"
Minimum Height: 15.4"
Folded Length: 23.2"
Leg Sections: 4
Weight: 7.3 lb
Carbon Fiber Legs with Twist Lock Joints
Geared Center Column with Locking Collar
Carrying Case with Shoulder Strap
The R-4214E Geared Center Column Carbon Fiber Tripod from Sirui is a robust carbon fiber tripod with a maximum height of 70.3", and a load capacity of 30.9 pounds, making it suitable for use with heavy camera setups, telescopes, precision measuring devices, and more. The center column is gear-driven for precise positioning and has a locking collar. The top of the center column features a reversible 3/8"-16 to 1/4"-20 threaded head mounting tip. The base of the center column also features a 3/8"-16 threaded tip for mounting a head in the inverted position.

The carbon fiber legs have independent spread and three locking positions for a variety of heights and to help achieve level on uneven terrain. Each leg has a padded leg cover for improved grip. The tripod legs have a graduated scale in 5cm increments for scenarios that require precise height adjustments. The rubber feet are removable and a set 3x spiked feet are included, so the R-4214E can have traction on any type of surface.

Geared center column with locking collar
Center column crank folds for easy storage
Independent leg spread
Three locking leg angles
Legs feature graduated scales
Padded leg covers for improved grip
Reversible 3/8"-16 to 1/4"-20 head mount
Bubble level
Included 3-spiked foot set

Form fitting design
Designed specifically for the Fujifilm X-H2/X-H2s
Lightweight aircraft grade aluminium
Removable top handle
Multiple mounting points for accessories
Arca standard bottom rail
Alternative quick release plate for use on a gimbal or tripod head
Wrist strap
This full cage is specifically designed for the Fujifilm X-H2/X-H2S. It adds a lot of mounting points without getting in the way of the camera’s controls. Cameras are attached to the cage via 2 points for added stability and rubber pads are included to keep the camera free from scratches and damage.

A variety of accessories can be attached to the camera via 1/4-20″ threaded holes, ARRI 3/8″-16 locating holes, cold shoe mounts, NATO rails, quick release plates, etc. Two types of quick release plates are included for quick switching between handheld, tripod, and gimbal modes.​ The ergonomic wrist strap takes a lot of pressure off your hand whether shooting horizontally or vertically, and provides more stability for the user.​ The Cage weighs only 370g (with handle) so even with a lot of accessories attached, the whole setup remains portable for handheld shooting.

Magnetic tools including a flathead screwdriver and an M2 hex key are stored at the bottom. The handle comes with three cold shoe mounts and has an Allen key built into it. Safety pins help lock the handle securely to the cage

Compatibility:

Fujifilm X-H2

Fujifilm X-H2s

Key Features
For Photo, Video & Film Production
Output: 700 Lux at 3.3'
2500–8000K CCT; RGB Mode
Local, DMX, and Bluetooth Control
CRI 97 | TLCI 97
14 Built-In Special Effects
Battery Power / AC Power
Versatile in form and function, the Telescopic RGB Tube Light from SIRUI expands the creative potential of any shoot with its adjustable length and full spectrum of color outputs. The tube light is built to extend from 2 to 4', while the RGB and hue, saturation, and intensity modes allow for precision color selection. The color temperature range spans from 2500K to 8000K with an additional green/magenta adjustment for blending with any ambient light situation. The light also features 14 built-in special effects including police car, broken bulb, and candle.

A companion iOS/Android app allows for full functional control of the light via your phone with Bluetooth from distances up to 49'. Connect and control light groups with the app or with dual 3.5mm DMX interfaces. The light is powered by an internal lithium-ion battery that lasts for up to 2.5 hours on a full charge. The light can also be used while connected to the included charging adapter. A 1/4"-20 thread on the bottom lets you mount the light on an optional mini tripod or other compatible support.

Key Features
18 to 29" Length Adjustment
360° Full Color RGB Mode
14 Built-In Special Effects
Music Mode: Reacts to Music or Sound
2500-8000K Color Temperature / 97 CRI
iOS/Android App & 2.4GHz Remote Control
Mounting Ring & 1/4"-20 Mounting Thread
Mini Tripod Included
Memory Function for Saving Settings
Integrated 2-Hour Battery
Not only a tube light but a telescopically adjustable one, the T60 Telescopic RGB LED Video Light from Sirui is highly portable and easily suitable for a wide range of applications. It telescopically adjusts from 18 to 29" in length. A 1/4"-20 thread on the bottom lets you mount the light on an included mini tripod or various other supports. On the opposite end is a pull-out ring for hanging the light on a hook or something similar. You can also use the light handheld.

Three operating modes and a companion iOS/Android app together allow you to simulate numerous lighting effects. Using the app, you can control all functions of the light from a distance. A 2.4GHz wireless remote control is also included. It comes attached to the grip handle of the light and is removable and works from up to 49' away. You can use it to control multiple units by assigning them to specified groups.

The color temperature is adjustable from a warm 2500K to a cool white 8000K, and color accuracy is up to 97 CRI/TLCI. The three operating modes are 360° full color RGB mode, effects mode, and music mode. Color mode lets you select any color from the color spectrum and adjust saturation and brightness. Effects mode offers 14 built-in special effects, such as flash, laser, candle, and fireworks. In music mode, the light reacts to music or sound, useful for music videos and other purposes. There's a pickup hole on the bottom of the light for this purpose.

The light features a memory function where you can save up to 20 dialed-in settings so that you can access them directly the next time around. The T60 is powered by an internal lithium-ion battery that runs up to two hours at full power. A charging adapter is included for recharging it in approximately 1.5 hours.

The T60 uses SMD RGB LEDs. Also, it's designed to ensure consistent light output with no flicker.

Key Features
Robust Aluminum Lens for APS-C Cameras
2.4:1 De-Squeezed Format; 10-Blade Iris
Schott Glass with Nano Coatings
Horizontal Blue Streaks/Less Stray Light
The Sirui 50mm f/1.8 Anamorphic 1.33x Lens, with an X-mount, is designed for APS-C cameras and increases the horizontal FOV by 33% in comparison with traditional 50mm APS-C lenses. The result is equivalent to a wider, 37.5mm APS-C lens. After a de-squeeze, the captured image is displayed in an anamorphic 2.4:1 format in a 16:9 setting. This fast f/1.8 lens is designed with an aluminum housing and features optics with multilayer Nano coatings. It has renowned Schott optical glass lens elements and delivers rectangular aspect ratios, long horizontal lens flares, and oval bokeh.

One of the features of this lens is that it produces horizontal blue streaks with less stray light, which Sirui calls sci-fi horizontal flares. A key aspect of anamorphic lenses is highlighted oval bokeh, and this lens achieves a shallow depth of field and oval bokeh with its 10 aperture blades. While the lens has a robust housing, it's also designed to be lightweight for use with your compact APS-C camera.

Key Features
Robust lens with advanced optics for compact APS-C cameras
33% horizontal field of view increase over standard 50mm APS-C lenses
Anamorphic 2.4:1 format in a 16:9 setting after de-squeeze
Aluminum housing
Schott optical glass
Multilayer Nano coatings
Horizontal blue streaks with less stray light
10 aperture blades
2.8' minimum focusing distance
67mm filter thread
Magnification: 1:15.38 (V), 1:20.17 (H)

Key Features
For EX Camera Stabilizer
Extension Arm for Separate Grip
Enables Underslung Position
1/4"-20 & 3/8"-16 Accessory Threads
The Extension Bracket Holder enables you to use an underslung position when used with a separate grip or tripod and your Sirui EX Camera Stabilizer. This aluminum bracket features a quick release design, a rotating base, and both 1/4"-20 and 3/8"-16 accessory threads.

Introducing the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head: Elevate Your Photography Game with Unmatched Precision and Durability

The Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head is a masterpiece of engineering, designed to exceed the expectations of professional photographers and outdoor enthusiasts. This remarkable tripod and ball head combo offers unparalleled stability, exceptional waterproof capabilities, and precise control, allowing you to capture awe-inspiring images in any challenging environment.

Unrivaled Stability and Durability:

Crafted from premium carbon fiber material, the Sirui ST-124 tripod combines strength with lightweight construction, making it easy to carry without compromising stability. Its robust design allows for a maximum load capacity of up to 12 kilograms, ensuring that your camera and lenses remain secure and steady, even when shooting with heavy equipment. Say goodbye to shaky shots and welcome crystal-clear images that truly stand out.

Weatherproof Performance:

With the Sirui ST-124 tripod, adverse weather conditions are no longer an obstacle. This tripod is not just resistant to dust and dirt but waterproof, making it perfect for photographers who are constantly pushing their boundaries. Whether you’re shooting in the rain, near water bodies, or even in sandy environments, rest assured that your gear will remain safe and protected, allowing you to focus on capturing breathtaking moments.

ST-10X Ball Head for Precise Control:

The included ST-10X Ball Head is a testament to Sirui’s commitment to precision and excellence. With separate knobs for panning, friction control, and locking, you have full control over the movement of your camera. The Arca-Swiss compatible quick-release plate enables seamless attachment and detachment, ensuring swift camera adjustments on the go. The ST-10X Ball Head allows you to capture the perfect composition with ease, empowering your creative vision.the dual panning clamp and base allow for easy panorama shooting.

Versatility and Adaptability:

The Sirui ST-124 tripod is designed to adapt to any shooting scenario. Its four-section legs can be independently adjusted to three different angles, allowing for stable positioning on uneven terrain. The tripod also features a reversible center column, enabling you to achieve low-angle shots or even use it for macro photography. With its versatility, this tripod opens up endless possibilities for your creative exploration.

Ease of Use and Portability:

Setting up the Sirui ST-124 tripod is a breeze, thanks to its user-friendly design and quick-lock leg system. The twist locks ensure fast and secure leg extension and retraction, allowing you to focus on capturing the perfect shot. When it’s time to move or pack up, the tripod collapses to a compact size for easy transportation. Weighing just 1.6 kilograms, the ST-124 is incredibly lightweight, making it a trusted companion for photographers on the move.

Embrace the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head and elevate your photography game to new heights. With its unbeatable stability, exceptional weatherproof performance, precise control, and adaptability, this tripod is a must-have tool for professionals and adventurers alike. Don’t let challenging environments hinder your creativity—unleash your vision with confidence using the Sirui ST-124.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.6kg
– Max. load: 12kg
– Tripod height: 450mm – 1710mm
– Closed size: 570mm

Included
1x SIRUI ST-124 waterproof tripod carbon fibre
1x ST-10X Ball head with QR plate
1x Transport bag with strap



The Sirui ST-10X Ball Head are designed and built to the highest standards. The ST-10X ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 38mm
– Weight: 0.43kg
– Height: 85mm
– Load Capacity: 20kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Sirui ST-224 Waterproof Carbon Fiber Tripod with ST-20 Ball Head

Load Capacity: 15kg
Leg Sections: 4
Weight: 1.9kg
Ultra Low profile design
Triangle Center Column
Integrated Stainless Steel Spikes and Rubber Feet
ST-20 Ball Head

Knobs for Pan, Tilt & Tension
Panning clamp
550 grams
Aluminium knobs for added durability
35 kg Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui ST-224 Waterproof Carbon Fibre Tripod with ST-20 Ball Head is protected from water, dirt and dust. In addition, it has a newly designed locking mechanism for comfortable operation and a spirit level for accurate alignment. The tripod tubes are manufactured from 8-layer carbon fibre (reduced weight, increased stability, vibration-free). The centre column is made in a triangle shape to enhance rigidity and also allows for the profile of the tripod to be extremely low profile when folded. The legs have three ratchet positions to allow for different angles and extension. The tripod measures just 48cm when collapsed. Each leg is made of 4 sections with 3 sealed twist locks. Rubber feet and metal spikes ensure that the tripod is stable on any surface.

A stabilising hook on the centre column is a SIRUI standard and a transport bag. The bag strap can also be used as a tripod strap.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.9kg
– Max. load: 15kg
– Tripod height: 520mm – 1840mm
– Closed size: 610mm

Included
1x SIRUI ST-224 waterproof tripod carbon fibre
1x ST-20 Ball head with QR plate
1x Transport bag with strap



The Sirui ST-20 Ball Head are designed and built to the highest standards. The ST-20 ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 40mm
– Weight: 0.55kg
– Height: 90mm
– Load Capacity: 35kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Shoulderless: With a reverse leg fold-up, easily backpack the 12.4 inches/315mm compact fit and carry less at a weight approximate to 1.58lbs/0.72kg(without head).

Multiple Working Height: Remove the center column for low angle and macro shots. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights.

Easy Leg Adjustments: Adjust the legs to your desired angle by pulling out the semi-automatic leg angle adjustment button. Easily set up the legs with a quick turn twist of the leg locks.

Shoot Beyond Your View: Smoothly pan the head 360° to capture a beautiful landscape panorama shot.
SIRUI Compact Traveler Tripod 5CX
MATERIAL: CARBON FIBER
Sections: 5
Max. Tube Diameter(mm/inch): 22/0.87
Min. Tube Diameter(mm/inch): 10/0.39
Min. Height(mm/inch): 90/3.54
Max. Height(mm/inch): 1320/51.97
Retracted Height(mm/inch): 535/21.1
Folded Height(mm/inch): 315/12.4
Weight(kg/lbs): 0.85/1.87
Max. Load(kg/lbs): 4/8.8
Ball Head Specification:
Diameter(mm/inch): 29/1.15
Height(mm/inch): 70/2.76
Weight(kg/lbs): 0.21/0.45
Max. Load(kg/lbs): 10/22

SIRUI Traveler 7A - Tripod / Monopod aluminium with ball head

All-round tripod with ball head
Those looking for a compact all-round tripod will be happy with the SIRUI Traveler 7. With its powerful ball head and integrated monopod, this small tripod offers everything a photographer needs. Whether in the bustling big city, exploring exciting landscapes, travelling or in the studio at home, the Traveler 7 is always at your side. And the 46.5 cm packing size turns into a tripod up to 171 cm tall.

Turn a tripod into a monopod
One leg of the tripod can be removed and used as a standalone monopod. This feature turns the Traveler 7 into a 2in1 tripod that lets you handle any situation. If that is not enough, the monopod with the centre column can even be extended to an incredible 174.5 cm working height (with head).

If you prefer it low, you can also mount the centre column upside down. Your camera has never been closer to the ground!

Stability and intuitive operation
With its non-slip rubber feet and the metal spikes included in the delivery, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be released and locked again in no time at all using the twist locks (ring locks). Thanks to the soft sponge rubber grips you always have your tripod safely under control. In winter they also serve as protection against the cold.

Compact packing size
The proven 180° flip-over function of the legs also makes this SIRUI tripod a true packing miracle. The Traveler 7 measures just 46.5 cm when packed. The ball head is completely enclosed.

Including ball head in black
It is equipped with the Safety Lock System to prevent the removable plate from accidentally slipping off. It also has a levelling level and a 360° panorama scale. It is compatible with the Arca Swiss System.

Features
- Monopod integrated
- Aluminium best quality in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Centre column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilising hooks and cold protection handles

Technical Data Tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. height with centre column: 1710mm
- Height of monopod: 500-1745mm
- Packing size: 465mm
- Tube diameter: 15 - 25,8mm
- Weight: 1,93kg
- Max. Load capacity: 8kg
- Material: aluminium

Technical data ball head
- Weight: 0,28kg
- Height: 88mm
- Ball diameter: 29mm
- Base diameter: 43mm
- Levelling level and safety pin
- Incl. exchangeable plate (Arca Swiss compatible)
- Material: aluminium


Scope of delivery
1x SIRUI Traveler 7A tripod/ monopod aluminium
1x SIRUI ball head aluminium with interchangeable plate
3x metal spikes
1x transport bag

Premium aluminum alloy construction is a perfect match to the Fujifilm X-T30 II X-T30 X-T20 X-T10 camera body
Anti-slip pads design for better protecting your devices. Offers a more comfortable and secure hold for shooting
Access to battery and memory card without taking off the grip; features a slot for connecting a wrist strap
Adopts Arce Swiss type Quick Release plate design
Replaces Fuji Fujifilm MHG-XT0 Hand Grip

Compatible with FUJIFILM X series cameras using NP-W126
Improved heat management compared to NP-W126
1260mAh(min.1200mAh), 8.7Wh, 7.2V
Recommended for X-T2 in conjunction with the Vertical Power Booster Grip to allow 30min of 4K movie recording.

About this item
【Adjustable Brightness and Color Temperature】Photo light box dimmer can adjust 10 levels brightness 10%-100% and color temperature 3200k-5500k(200k±). You can choose the light to meet your different photography needs.
【High-quality Lighting】High brightness photo box with 140 pcs led light beads. Reflective materials can spread light evenly, making your items look more advanced, and saving your time in processing pictures.
【6 Color Backdrops & Diffuser Cloth】There are 6 color backdrops with our light tent: white, gray, black, red, blue, yellow. Different color backgrounds for different photography subjects, and there is a diffuser cloth to diffuser the light which can weaken the reflection of objects.
【Multi-angle Shooting & Portable】Multiple openings in the studio mean the subject can be shot from different angles. Moreover, our photo studio box connected by velcro. One-piece design can be easily folded into a handbag which is easy to set up, foldable and portable.
【Package List】1x photo light box, 2x light boards, 6x backdrops, 1x diffuser cloth, 1x power cord, 1x adapter, 1x manual.

About this item
【Adjustable Brightness and Color Temperature】Photo light box dimmer can adjust 10 levels brightness 10%-100% and color temperature 3200k-5500k(200k±). You can choose the light to meet your different photography needs.
【High-quality Lighting】High brightness photo box with 140 pcs led light beads. Reflective materials can spread light evenly, making your items look more advanced, and saving your time in processing pictures.
【6 Color Backdrops & Diffuser Cloth】There are 6 color backdrops with our light tent: white, gray, black, red, blue, yellow. Different color backgrounds for different photography subjects, and there is a diffuser cloth to diffuser the light which can weaken the reflection of objects.
【Multi-angle Shooting & Portable】Multiple openings in the studio mean the subject can be shot from different angles. Moreover, our photo studio box connected by velcro. One-piece design can be easily folded into a handbag which is easy to set up, foldable and portable.
【Package List】1x photo light box, 2x light boards, 6x backdrops, 1x diffuser cloth, 1x power cord, 1x adapter, 1x manual.