Designed for mobile journalists, videographers, and vloggers, the Godox WMicS1 Kit 2 is a wireless system with two lavalier microphones and just one receiver. It delivers reliable transmission with a clear sound at a distance up to 328' and offers a complete solution for streaming or recording dialogue, interviews, lectures, and speech with two people talking simultaneously-directly to a mirrorless/DSLR camera, camcorder, or mixer. Easy-to-use with plug-&-play operation, this system is well suited for mobile journalists, YouTube/Instagram creators, TikTok personalities, vloggers, and more.

The WMicS1 Kit 2 includes two bodypack transmitters with omnidirectional lavalier mics. It also comes with a receiver that mounts on and plugs directly into your DSLR/mirrorless camera. The XLR output cable is for use with professional camcorders.

The system offers 96 frequencies to choose from to avoid wireless signal interference. The transmitters and the receiver operate on two AA batteries but can also be powered via USB. If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.

Two Microphones into One Receiver
• The two-channel receiver allows you to save space on your shooting rig by using a single receiver to simultaneously receive signals from the two mic/transmitters.
• When using just one mic, the sound is recorded on both the left and right channels of your camera. When using two microphones, each sound is recorded separately with one on the left channel of your camera and the other on the right channel-allowing you to isolate each person's voice and adjust each level individually later in post.
• There are 30 levels of volume adjustment to control the audio output of the receiver-for both mics individually.
• Two Bodypack Transmitters with Lavalier Mics
• The lightweight bodypack transmitters are equipped with an On/Off switch that doubles as a mute button.
• The transmitters feature an easy-to-read OLED display that indicates the mic's input level, muting, and battery life.
• RF power can be switched between 40mW for maximum transmission distance or 10mW for maximum battery life.
• The lavalier microphones feature omnidirectional pickup patterns that help to deliver consistent audio levels even when the subject turns away form the mic.

WMic S1
Easy-to-use with plug-&-play operation, this system is well suited for mobile journalists, YouTube/Instagram creators, TikTok personalities, vloggers, and more. The WMicS1 Kit 1 includes one bodypack transmitter with an omnidirectional lavalier mic. It also comes with a receiver that mounts on and plugs directly into your DSLR/mirrorless camera. The XLR output cable is for use with professional camcorders.

The system offers 96 frequencies
to choose from to avoid wireless signal interference. The transmitter and the receiver both operate on two AA batteries but can also be powered via USB. If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.

Bodypack Transmitter with Lavalier Mic
The lightweight bodypack transmitter is equipped with an On/Off switch that doubles as a mute button. The transmitter features an easy-to-read OLED display that indicates the mic's input level, muting, and battery life.
RF power can be switched between 40mW for maximum transmission distance or 10mW for maximum battery life. The lavalier microphone features an omnidirectional pickup pattern that help to deliver consistent audio levels even when the subject turns away from the mic.

Compact Dual-Channel Receiver
If you need to expand your system with a second microphone, the two-channel receiver allows you to save space on your shooting rig by using a single receiver to simultaneously receive signals from two mic/transmitters. When using just one mic, the sound is recorded on both the left and right channels of your camera. When using two microphones, each sound is recorded separately with one on the left channel of your camera and the other on the right channel—allowing you to isolate each person's voice and adjust each level individually later in post. There are 30 levels of volume adjustment to control the audio output of the receiver—for both mics individually.

Godox WMICS1 PRO KIT 1

Overview

Designed for mobile journalists, videographers, and vloggers, the Godox WMicS1 Pro Kit 1 is a wireless system with one lavalier microphone and a dual-channel receiver that can also be used to receive a second microphone (available separately). It delivers reliable transmission with a clear sound at a distance up to 328' and offers a complete solution for streaming or recording dialogue, interviews, lectures, and speech with one person talking—directly to a mirrorless/DSLR camera, camcorder, or mixer. Easy-to-use with plug-&-play operation, this system is well suited for mobile journalists, YouTube/Instagram creators, TikTok personalities, vloggers, and more.

This Pro version offers full metal housing on the components, an improved OLED display that is easily seen in both daylight and darkness, and adjustable antennas that allow for better positioning to improve reception.

The WMicS1 Pro Kit 1 includes one bodypack transmitter with an omnidirectional lavalier mic. It also comes with a receiver that mounts on your DSLR/mirrorless camera's shoe mount and plugs into the camera's audio input jack via the included 3.5mm TRS cable. The XLR output cable is for use with professional camcorders, while a 3.5mm TRRS cable is supplied for use with mobile devices.

The system offers 96 frequencies in the UHF range to choose from to avoid wireless signal interference. The transmitter and the receiver both operate on two AA batteries, but can also be powered via USB. If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.

All-Metal Bodypack Transmitter with Lavalier Mic
The compact bodypack transmitter offers a durable metal housing and is equipped with an On/Off switch that doubles as a mute button.
The transmitter features an easy-to-read OLED display that indicates the mic's input level, muting, and battery life.
RF power can be switched between 40mW for maximum transmission distance or 10mW for maximum battery life.

Godox WMICS1 PRO KIT 2

Overview

Designed for mobile journalists, videographers, and vloggers, the Godox WMicS1 Pro Kit 2 is a wireless system with two lavalier microphones and just one receiver. It delivers reliable transmission with a clear sound at a distance up to 328' and offers a complete solution for streaming or recording dialogue, interviews, lectures, and speech with two people talking simultaneously—directly to a mirrorless/DSLR camera, camcorder, or mixer. Easy-to-use with plug-&-play operation, this system is well suited for mobile journalists, YouTube/Instagram creators, TikTok personalities, vloggers, and more.

This Pro version offers full metal housing on the components, an improved OLED display that is easily seen in both daylight and darkness, and adjustable antennas that allow for better positioning to improve reception.

The WMicS1 Pro Kit 2 includes two bodypack transmitters with omnidirectional lavalier mics. It also comes with a receiver that mounts on your DSLR/mirrorless camera's shoe mount and plugs into the camera's audio input jack via the included 3.5mm TRS cable. The XLR output cable is for use with professional camcorders, while a 3.5mm TRRS cable is supplied for use with mobile devices.

The system offers 96 frequencies to choose from to avoid wireless signal interference. The transmitters and the receiver operate on two AA batteries but can also be powered via USB. If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal. A carrying case for the components is included.

Two Microphones into One All-Metal Receiver
The two-channel receiver allows you to save space on your shooting rig by using a single receiver to simultaneously receive signals from the two mic/transmitters.
In mono mode, the sound is recorded equally on both the left and right channels of your camera—great when you're only working with a single microphone. When using two microphones, switching to stereo mode means each sound is recorded separately with one on the left channel of your camera and the other on the right channel—allowing you to isolate each person's voice and adjust each level individually later in post.
There are 30 levels of volume adjustment to control the audio output of the receiver—for both mics individually.

Godox WMicS2

Overview


For mobile journalists, videographers, and vloggers, the Godox WMicS2 Kit 1 is a wireless system with one transmitter with lavalier microphone and one dual-channel receiver. It delivers reliable transmission with clear sound up to 656' over 96 selectable UHF frequencies directly to your camera, mixer, or smartphone with 3.5mm port. Easy-to-use with plug-and-play operation, this system offers a complete solution for recording dialogue, interviews, or lectures.

The clip-on transmitter offers both a built-in microphone and a 3.5mm port for the included omnidirectional lavalier, which attaches to a lapel or shirt. You can record backup audio via the TF card slot for worry-free audio capture. Built-in features like a low-cut filter and mute can be controlled via the onboard buttons.

The dual-channel receiver can record in either mono or stereo modes. You can easily add an additional transmitter (available separately) for two-person applications. Both devices come with back clips and magnet mounts to discreetly attach to videographer or subject. They have 1/4"-20 threads for mounting to compatible cold shoe adapters. Internal 770mAh lithium batteries power both components and included USB-C cables charge them back up once depleted. A foam windscreen can be attached to the transmitter to reduce wind interference.

Features at a Glance
Wireless system for vlogging, interviews, and video production
Works with smartphones, cameras, and audio recorders with 3.5mm input jack
656' line-of-sight range, 197' range with barriers
Foldable antennae can be rotated on both devices to improve signal transmission
1 clip-on transmitter with built-in microphone and foam windscreen
1 lavalier mic included for low-profile visual work
Low-cut/mute button on transmitter
Dual-channel receiver clips or screws onto camera shoe mount adapter
Adjustable output volume and mono/stereo output modes on receiver
Built-in 770mAh lithium rechargeable batteries
OLED display on receiver show important information including battery life, connectivity, and more
Includes USB-C charging cables, 3.5mm TRS to TRRS cable, and 3.5mm TRS to TRS cable

Godox WMicS2

Overview


For mobile journalists, videographers, and vloggers, the Godox WMicS2 Kit 2 is a wireless system with two transmitters with lavalier microphones and one dual-channel receiver. It delivers reliable transmission with clear sound up to 656' over 96 selectable UHF frequencies directly to your camera, mixer, or smartphone with 3.5mm port. Easy-to-use with plug-and-play operation, this system offers a complete solution for recording dialogue, interviews, or lectures.

Each clip-on transmitter offers both a built-in microphone and a 3.5mm port for the included omnidirectional lavaliers which attach to a lapel or shirt. You can record backup audio via their TF card slots for worry-free audio capture. Built-in features like a low-cut filter and mute can be controlled via the onboard buttons.

The dual-channel receiver can record in either mono or stereo modes. Each device comes with back clips and magnet mounts to discreetly attach to videographer or subject. They have 1/4"-20 threads for mounting to compatible cold shoe adapters. Internal 770mAh lithium batteries power all components and an included case charges them up once depleted. Two USB cables and two foam windscreens for the transmitters are also included.

Features at a Glance
2-person wireless system for vlogging, interviews, and video production
Works with smartphones, cameras, and audio recorders with 3.5mm input jack
656' line-of-sight range, 197' range with barriers
Foldable antennae can be rotated on each device to improve signal transmission
2 clip-on transmitters with built-in microphone, and foam windscreens
2 lavalier mics included for low-profile visual work
Low-cut/mute button on transmitters
Dual-channel receiver clips or screws onto camera shoe mount adapter
Adjustable output volume and mono/stereo output modes on receiver
Built-in 770mAh lithium rechargeable batteries
OLED display on receiver shows important information including battery life, connectivity, and more
Includes USB-C charging cables, 3.5mm TRS to TRRS cable, and 3.5mm TRS to TRS cable
Convenient charging case included for transport and storage

Godox X2

Overview

The Godox X2 2.4 GHz TTL Wireless Flash Trigger is dedicated to Canon's E-TTL/E-TTL II system and operates on a 2.4 GHz frequency. The wireless flash trigger can fire a single flash or multiple dedicated flash units within 5 groups, 32 channels, and 99 ID settings to avoid interference from other nearby systems. For the added convenience, the integrated scan setting function can help you automatically locate an ID channel with the least interference. You can also operate the flash units within a wireless range up to 328'.

All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons. A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord. The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth. The app can control the same functions as the wireless trigger such as the flash mode, power output, the modeling light, high speed sync, and the audible beep of Godox flashes.

The wireless trigger, which operates on a 2.4 GHz frequency can fire multiple flash units within 32 channels and 99 ID settings, so there is no interference from nearby systems.
You can control flash functions such as the flash mode, power output, the modeling light, high speed sync of 1/8000 sec, and the audible beep of Godox flashes while operating the flash units within a wireless range up to 328'.
The integrated scan setting function can help you automatically locate an ID channel with the least interference.
All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons.
A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord.
The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth.
The hot shoe Quick Lock ensures that the wireless trigger stays secure on the camera's hot shoe.

Godox X2

Overview

The Godox X2 2.4 GHz TTL Wireless Flash Trigger is dedicated to Nikon's i-TTL system and operates on a 2.4 GHz frequency. The wireless flash trigger can fire a single flash or multiple dedicated flash units within 5 groups, 32 channels, and 99 ID settings to avoid interference from other nearby systems. For the added convenience, the integrated scan setting function can help you automatically locate an ID channel with the least interference. You can also operate the flash units within a wireless range up to 328'.

All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons. A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord. The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth. The app can control the same functions as the wireless trigger such as the flash mode, power output, the modeling light, high speed sync, and the audible beep of Godox flashes.

The wireless trigger, which operates on a 2.4 GHz frequency can fire multiple flash units within 32 channels and 99 ID settings, so there is no interference from nearby systems.
You can control flash functions such as the flash mode, power output, the modeling light, high speed sync of 1/8000 sec, and the audible beep of Godox flashes while operating the flash units within a wireless range up to 328'.
The integrated scan setting function can help you automatically locate an ID channel with the least interference.
All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons.
A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord.
The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth.
The hot shoe Quick Lock ensures that the wireless trigger stays secure on the camera's hot shoe.

Godox X2

Overview

The Godox X2 2.4 GHz TTL Wireless Flash Trigger is dedicated to Fujifilm's TTL system and operates on a 2.4 GHz frequency. The wireless flash trigger can fire a single flash or multiple dedicated flash units within 5 groups, 32 channels, and 99 ID settings to avoid interference from other nearby systems. For the added convenience, the integrated scan setting function can help you automatically locate an ID channel with the least interference. You can also operate the flash units within a wireless range up to 328'.

All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons. A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord. The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth. The app can control the same functions as the wireless trigger such as the flash mode, power output, the modeling light, high speed sync, and the audible beep of Godox flashes.

The wireless trigger, which operates on a 2.4 GHz frequency can fire multiple flash units within 32 channels and 99 ID settings, so there is no interference from nearby systems.
You can control flash functions such as the flash mode, power output, the modeling light, high speed sync of 1/8000 sec, and the audible beep of Godox flashes while operating the flash units within a wireless range up to 328'.
The integrated scan setting function can help you automatically locate an ID channel with the least interference.
All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons.
A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord.
The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth.
The hot shoe Quick Lock ensures that the wireless trigger stays secure on the camera's hot shoe.

Godox X2

Overview

The Godox X2 2.4 GHz TTL Wireless Flash Trigger is dedicated to Sony's TTL system and operates on a 2.4 GHz frequency. The wireless flash trigger can fire a single flash or multiple dedicated flash units within 5 groups, 32 channels, and 99 ID settings to avoid interference from other nearby systems. For the added convenience, the integrated scan setting function can help you automatically locate an ID channel with the least interference. You can also operate the flash units within a wireless range up to 328'.

All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons. A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord. The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth. The app can control the same functions as the wireless trigger such as the flash mode, power output, the modeling light, high speed sync, and the audible beep of Godox flashes.

The wireless trigger, which operates on a 2.4 GHz frequency can fire multiple flash units within 32 channels and 99 ID settings, so there is no interference from nearby systems.
You can control flash functions such as the flash mode, power output, the modeling light, high speed sync of 1/8000 sec, and the audible beep of Godox flashes while operating the flash units within a wireless range up to 328'.
The integrated scan setting function can help you automatically locate an ID channel with the least interference.
All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons.
A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord.
The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth.
The hot shoe Quick Lock ensures that the wireless trigger stays secure on the camera's hot shoe.

Godox XPro

Overview

Using the 2.4 GHz Godox X wireless radio system, the XProC TTL Wireless Flash Trigger can be used to effectively and reliably trigger flashes from up to 328' away, and when used with compatible flashes and receivers users will have the added benefit of remote power control. This model is compatible with Canon's E-TTL / E-TTL II system, including support for high-speed sync up to 1/8000 second, and offers advanced control options along with settings for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.

In addition to basic manual and TTL control modes, other settings are available, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to +3 EV as well as wirelessly control the modeling light, zoom setting, and more. For using the XProC with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the devices run on two AA batteries for

Godox XPro

Overview

Using the 2.4 GHz Godox X wireless radio system, the XProF TTL Wireless Flash Trigger can be used to effectively and reliably trigger flashes from up to 328' away, and when used with compatible flashes and receivers users will have the added benefit of remote power control. This model is compatible with Fujifilm's TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control options along with settings for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.

In addition to basic manual and TTL control modes, other settings are available, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to +3 EV as well as wirelessly control the modeling light, zoom setting, and more. For using the XProF with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the devices run on two AA batteries for convenience.

Godox XPro

Overview

Using the 2.4 GHz Godox X wireless radio system, the XProN TTL Wireless Flash Trigger can be used to effectively and reliably trigger flashes from up to 328' away, and when used with compatible flashes and receivers users will have the added benefit of remote power control. This model is compatible with Nikon's i-TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control options along with settings for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.

In addition to basic manual and TTL control modes, other settings are available, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to +3 EV as well as wirelessly control the modeling light, zoom setting, and more. For using the XProN with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the devices run on two AA batteries for convenience.

Godox XPro Overview
Using the 2.4 GHz Godox X wireless radio system, the XProS TTL Wireless Flash Trigger can be used to effectively and reliably trigger flashes from up to 328' away, and when used with compatible flashes and receivers users will have the added benefit of remote power control. This model is compatible with Sony's ADI / P-TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control options along with settings for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.

In addition to basic manual and TTL control modes, other settings are available, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to +3 EV as well as wirelessly control the modeling light, zoom setting, and more. For using the XProS with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the devices run on two AA batteries for convenience.

In the Box
Godox XProS TTL Wireless Flash Trigger for Sony Cameras
Limited 1-Year B&H Warranty
Not in the Box
Essential Batteries (Not Included)

Godox XProII

Overview

Designed for the 2.4 GHz Godox X wireless radio system, this XPro II TTL Wireless Flash Trigger lets you effectively and reliably trigger flashes up to 328' away. This upgraded model is compatible with the Sony TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.

Additionally, this wireless trigger now features Bluetooth connectivity for remote operation. Simply download the GodoxPhoto app onto a compatible iPhone or Android smartphone or tablet, and you can remotely adjust the flash mode, power output, modeling light, high speed sync, and more. In addition to basic manual and TTL control modes, other settings are available as well, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to 3 EV and wirelessly control the modeling light, zoom setting, and more.
Compatible with the 2.4 GHz Godox X wireless radio system
Effectively and reliably triggers flashes up to 328' away
Supports high-speed sync photography up to 1/8000 second
16 groups on 32 channels with access to 99 wireless ID settings
Stroboscopic flash and second-curtain sync modes
Adjusts flash exposure compensation from -3 to +3 EV
Control modeling light, zoom setting, and more
Bluetooth connectivity for remote control via GodoxPhoto app
2.5mm sync port supports triggering via a wired connection
USB Type-C port for firmware updates
Run on two AA batteries for convenience

Godox Xpro II transmitter for Fuji

The new and improved XPro transmitter edition brings more intuitive, professional and user-friendly features. Inheriting all the professional functions of the Godox flash triggers, the XProII supports TTL auto flash across brands, stroboscopic flash, second-curtain sync modes, and allows for high-speed sync with shutter speeds up to 1/8000s. Moreover, it’s designed with an extra-large LCD screen and intuitive display panel to enhance your working efficiency.

Stable and Seamless Connection
Thanks to the 2.4GHz Godox wireless X system, the XProII helps you achieve seamless and stable control of the Godox lighting system. It features multi-channel triggering with 16 groups on one of 32 channels and can then access 99 wireless ID settings, with stable signal transmission from up to 100 m away. The highlight is the scanning function to automatic searching for the spare channels and IDs in a complex shooting environment, which will save you much time for preparation.

Godox Flash App
What also keeps evolving is Godox Flash App. To provide users with a more flexible and intuitive controlling process, the XproII is built with Bluetooth connectivity so that the lighting parameters can be easily adjusted on your iPhone, Android smartphone, or tablet. The Goodx Flash App is designed with a clear and easy-to-use interface which will bring you unparalleled working efficiency.

Quick-Release Lock
The XproII – S/N/C/F/O employs a quick release lock design. With a simple push to place your flash trigger safe in place, this design will provide you a efficient and convenient shooting process.

Optional Single Contact Triggering
This TTL wireless flash trigger also provides an optional single contact function, featuring more speedy and sensitive triggering. So when you shoot in burst mode, the single contact triggering will make sure the flash are triggered in rapid succession with much shorter intervals.

II gen
The new and improved XPro transmitter edition brings more intuitive, professional and user-friendly features. Inheriting all the professional functions of the Godox flash triggers, the XProII supports TTL auto flash across brands, stroboscopic flash, second-curtain sync modes, and allows for high-speed sync with shutter speeds up to 1/8000s. Moreover, it’s designed with an extra-large LCD screen and intuitive display panel to enhance your working efficiency.

Stable and Seamless Connection
Thanks to the 2.4GHz Godox wireless X system, the XProII helps you achieve seamless and stable control of the Godox lighting system. It features multi-channel triggering with 16 groups on one of 32 channels and can then access 99 wireless ID settings, with stable signal transmission from up to 100 m away. The highlight is the scanning function to automatic searching for the spare channels and IDs in a complex shooting environment, which will save you much time for preparation.

Godox Flash App
What also keeps evolving is Godox Flash App. To provide users with a more flexible and intuitive controlling process, the XproII is built with Bluetooth connectivity so that the lighting parameters can be easily adjusted on your iPhone, Android smartphone, or tablet. The Goodx Flash App is designed with a clear and easy-to-use interface which will bring you unparalleled working efficiency.

Quick-Release Lock
The XproII – S/N/C/F/O employs a quick release lock design. With a simple push to place your flash trigger safe in place, this design will provide you a efficient and convenient shooting process.

Sekonic cooperation
A collaboration has been established between XProII and Sekonic L-858 to enhance your workflow to the next level. L-858 is built-in with Godox 2.4G module, so you are able to adjust the flash parameter directly on L-858 after metering, ensuring a much more precise and convenient lighting process.

TCM Instant Conversion
The Godox innovative TCM function brings you smooth operation and lets you immerse into your creative passion. The two-way TCM allows for instant conversion from TTL mode to Manual mode with retained parameters and back again. This function helps you get the proper exposure value quickly and promises you an accurate and coherent expression of light.

Optional Single Contact Triggering
This TTL wireless flash trigger also provides an optional single contact function, featuring more speedy and sensitive triggering. So when you shoot in burst mode, the single contact triggering will make sure the flash are triggered in rapid succession with much shorter intervals.

Godox XProII Overview

Designed for the 2.4 GHz Godox X wireless radio system, this XPro II TTL Wireless Flash Trigger lets you effectively and reliably trigger flashes up to 328' away. This upgraded model is compatible with the Sony TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.

Additionally, this wireless trigger now features Bluetooth connectivity for remote operation. Simply download the GodoxPhoto app onto a compatible iPhone or Android smartphone or tablet, and you can remotely adjust the flash mode, power output, modeling light, high speed sync, and more. In addition to basic manual and TTL control modes, other settings are available as well, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to 3 EV and wirelessly control the modeling light, zoom setting, and more.
Compatible with the 2.4 GHz Godox X wireless radio system
Effectively and reliably triggers flashes up to 328' away
Supports high-speed sync photography up to 1/8000 second
16 groups on 32 channels with access to 99 wireless ID settings
Stroboscopic flash and second-curtain sync modes
Adjusts flash exposure compensation from -3 to +3 EV
Control modeling light, zoom setting, and more
Bluetooth connectivity for remote control via GodoxPhoto app
2.5mm sync port supports triggering via a wired connection
USB Type-C port for firmware updates
Run on two AA batteries for convenience

Key Features
Accepts INSTAX MINI instant film
Fujinon 60mm lens with selfie mirror
Auto exposure and auto flash
Dedicated selfie/telephoto mode
Optical viewfinder
Two AA batteries
Dedicated to the joy of living in the moment, the FUJIFILM INSTAX MINI 12 instant film camera offers easy-to-use controls and quickly produces unforgettable credit card-sized photos. It is ready to go with a simple twist of the lens. The zoom mode and selfie mirror make the camera ideal for portraits and portraits, and the camera's auto flash system allows you to capture shots in dimly lit environments.

Key Features
Accepts INSTAX MINI instant film
Fujinon 60mm lens with selfie mirror
Auto exposure and auto flash
Dedicated selfie/telephoto mode
Optical viewfinder
Two AA batteries
Dedicated to the joy of living in the moment, the FUJIFILM INSTAX MINI 12 instant film camera offers easy-to-use controls and quickly produces unforgettable credit card-sized photos. It is ready to go with a simple twist of the lens. The zoom mode and selfie mirror make the camera ideal for portraits and portraits, and the camera's auto flash system allows you to capture shots in dimly lit environments.