This white MoveLink Mini UC 2-Person Wireless Microphone System from Godox features a modular output design on the dual-channel receiver with three adapters for expanded connectivity compatible with DSLR cameras, audio recorders, and smartphones with USB-C ports. Included in the system are two clip-on transmitter units, each with an integrated omnidirectional microphone for improved audio pickup. Each component communicates to each other from up to 328' away.

Controls on the receiver toggle first and second levels of gain and controls on each transmitter can toggle mute or noise reduction. A foam windscreen for each transmitter helps reduce the effect of wind noise when recording outside. Built-in batteries keep each transmitter running for 6 hours and the receiver running for 8 hours. Once depleted, use the included charging case to recharge and bring the entire system on the go.

The MoveLink UC RX from Godox is a tiny, easy-to-use, and cost-effective smartphone-mountable wireless microphone receiver. This dual-channel unit is designed to be used with one or two MoveLink TX ultracompact clip-on microphone/transmitters (available separately) to create a portable solution that lets you record audio from one or two subjects to a smartphone, tablet, or other mobile device with a USB Type-C port.

The two-channel receiver plugs into your phone's USB port, which supplies it with power and makes it easy to record videos with two presenters on camera at once while keeping your rig small and lightweight. The system can be expanded with additional transmitters and receivers to allow up to 8 microphones in use on set at one time.

This black MoveLink Mini UC Wireless Microphone System from Godox features a modular output design on the dual-channel receiver with three adapters for expanded connectivity compatible with DSLR cameras, audio recorders, and smartphones with USB-C ports. Included in the system is a clip-on transmitter unit with an integrated omnidirectional microphone for improved audio pickup. Each component communicates to each other from up to 328' away.

Controls on the receiver toggle first and second levels of gain and controls on the transmitter can toggle mute or noise reduction. A foam windscreen for the transmitter helps reduce the effect of wind noise when recording outside. Built-in batteries keep the transmitter running for 6 hours and the receiver running for 8 hours. Once depleted, use the included charging case to recharge and bring the entire system on the go.

This black MoveLink Mini UC 2-Person Wireless Microphone System from Godox features a modular output design on the dual-channel receiver with three adapters for expanded connectivity compatible with DSLR cameras, audio recorders, and smartphones with USB-C ports. Included in the system are two clip-on transmitter units, each with an integrated omnidirectional microphone for improved audio pickup. Each component communicates to each other from up to 328' away.

Controls on the receiver toggle first and second levels of gain and controls on each transmitter can toggle mute or noise reduction. A foam windscreen for each transmitter helps reduce the effect of wind noise when recording outside. Built-in batteries keep each transmitter running for 6 hours and the receiver running for 8 hours. Once depleted, use the included charging case to recharge and bring the entire system on the go.

MS200 Monolight
The MS studio Flash features a 0.1-1.8 second recycling time with flash durations as short as 1/2000 second. Power is variable from 1/32 to full power, adjustable in 50 steps, while the 150W modeling light is adjustable from 5 to 100% to allow you to preview your lighting effects.

02
Easy-to-use
Settings are accessed via rear panel push buttons and displayed on the easy-to-read LCD screen. Triggering options include sync cord, test button, and slave triggering.

03
Pre Flash Function
The head also has an anti-pre-flash function that makes it easy to work with point-and-shoot and other cameras that employ pre-flash.

04
Versatility
The MS200 weighs in at 5.7 lb, encouraging the assembly of a kit with two or more heads without having to lug a heavy case around. The MS200 has a Bowens front accessory mount, allowing it to use Godox modifiers as well as accessories from the many manufacturers that use this system.

05
Wireless X System
Use wireless trigger X1 as well as power remotes XT16, XPro, and X2 to wirelessly control the head's power, modeling light, triggering, and more. The system has 32 radio channels and 16 groups.

06
Fast Recycling and Flash Duration
The head features 0.1 to 1.8 second recycling times and flash durations from 1/2000 to 1/800 second.

07
Precise Power Adjustment
Power can be adjusted from 1/1 to 1/32 in 50 steps. The 150W modeling light's brightness can be adjusted from 5 to 100%.

08
Interface
The LCD screen displays settings and functions.

09
In package:

MS Flash
Power Supply Cord
Modeling Lamp
Lamp Cover

the MS200-V Studio Flash Monolight from Godox is a 5800K flash source that replaces the original 150W halogen lamp model with a 10W LED modeling lamp that draws very little power with great brightness. It features a 0.1 to 1.8 second recycling time with flash durations as short as 1/2000 sec. Power is variable from 1/32 to full power while the 10W LED modeling light is adjustable from 5 to 100%. Triggering options include sync cord, optical, test button, and wireless power control. The MS200-V is ready to run on 110 to 120 VAC mains power. It has a Bowens mount for wide compatibility with optional accessories.

Additional Benefits
Outstanding, stable output for studio work
Well-suited for portraits and product shots
Built-in 2.4 GHz wireless system
Works with optional X1, X2, XT-16, or FT-16 triggers to control power ratio, modeling lamp, buzzer, as well as flash triggering
LCD screen for onboard control

MS300 Monolight
The MS studio Flash features a 0.1-1.8 second recycling time with flash durations as short as 1/2000 second. Power is variable from 1/32 to full power, adjustable in 50 steps, while the 150W modeling light is adjustable from 5 to 100% to allow you to preview your lighting effects.

02
Easy-to-use
Settings are accessed via rear panel push buttons and displayed on the easy-to-read LCD screen. Triggering options include sync cord, test button, and slave triggering.

03
Pre Flash Function
The head also has an anti-pre-flash function that makes it easy to work with point-and-shoot and other cameras that employ pre-flash.

04
Versatility
The MS300 weighs in at 6 lb, encouraging the assembly of a kit with two or more heads without having to lug a heavy case around. The MS300 has a Bowens front accessory mount, allowing it to use Godox modifiers as well as accessories from the many manufacturers that use this system.

05
Wireless X System
Use wireless trigger X1 as well as power remotes XT16, XPro, and X2 to wirelessly control the head's power, modeling light, triggering, and more. The system has 32 radio channels and 16 groups.

06
Fast Recycling and Flash Duration
The head features 0.1 to 1.8 second recycling times and flash durations from 1/2000 to 1/800 second.

07
Precise Power Adjustment
Power can be adjusted from 1/1 to 1/32 in 50 steps. The 150W modeling light's brightness can be adjusted from 5 to 100%.

08
Interface
The LCD screen displays settings and functions.

09
In package:

MS Flash
Power Supply Cord
Modeling Lamp
Lamp Cover

the MS300-V Studio Flash Monolight from Godox is a 5800K flash source that replaces the original 150W halogen lamp model with a 10W LED modeling lamp that draws very little power with great brightness. It features a 0.1 to 1.8 second recycling time with flash durations as short as 1/2000 sec. Power is variable from 1/32 to full power while the 10W LED modeling light is adjustable from 5 to 100%. Triggering options include sync cord, optical, test button, and wireless power control. The MS300-V is ready to run on 110 to 120 VAC mains power. It has a Bowens mount for wide compatibility with optional accessories.

Additional Benefits
Outstanding, stable output for studio work
Well-suited for portraits and product shots
Built-in 2.4 GHz wireless system
Works with optional X1, X2, XT-16, or FT-16 triggers to control power ratio, modeling lamp, buzzer, as well as flash triggering
LCD screen for onboard control

Resembling a tulip cup, very deep canopy of this softbox is one of its important features. This shape allows the user to control precisely where the light falls. If necessary, the hexadecagon can also be used with a honeycomb (available separately).

The Softbox is delivered in a handy case easy to transport and storage.

Hexadecagon is made of the highest quality materials. The plating is sewn from high quality taffeta nylon with a rip-stop weave, which combines a low mass with high mechanical strength. Interior is covered with a color neutral silver screen, which is designed to reflect the light and evenly spread them on the diffusers.

Softbox is equipped with two diffusion surfaces made of rip-stop polyester. Inner diffuser has a sewn-in extra sheet in its central part to limit the focus of light from the lamp.

The set contains:

Godox Softbox P120L Hexadecagon 120
inner diffuser
outer diffuser
case
original packaging

Product description Godox P90L Parabol Softbox 90 cm Reflector
This softbox has a deep parabolic design that allows the light to be emitted directly and progressively reduces the brightness from the centre to the edge. As a result, it offers extremely uniform, soft and highly saturated lighting effects for shooting, with easy installation, simple operation, great portability and a wide range of applications.

FEATURES:
- Reliable and durable: protected against wind, shocks and falls
- suitable for studio and outdoor recordings
- easy to assemble
- Material of the rods: glass fibre
- Diameter: 90 cm
- Depth: 69.4 cm
- Weight: 1.5 kg

Product Features:

Soft Light with an Edge of Crispness
Focused Light Offers Directional Control
Increased Dimension, Detail & Contrast
Reduced Spill Light, Easy Feathering

QR-P70
Godox quick release parabolic softbox adopts an impressive quick release system for rapid setup and breakdown. Highly versatile and compatible, it provides you reliable light quality and various creative expressions. Available in 3 different sizes, this fast and easy to use softbox is an ideal companion for your indoor and on location shootings.

02
Create Your Own Lighting
This softbox has a reflective silver interior to render a punchy high contrast. The removable inner and front fabric diffusers offer you different light softening options to get the perfect look you like.The fabric grid (optional – not included) is available to narrow the beam spread for more precise control.

03
Lift to Open
Effortless setup-simply lift the rods from the speed ring until they click in place. Quick breakdown-simply lift the rod slightly while pushing its button, then you can pack to next job.

04
Small SpeedRing
The speed ring is designed to be as small as possible to make the softbox kit easier to carry and storage during the photography journey.

05
Versatile Compatibility
Compatible with a wide range of Bowens mount strobes and continuous lights, this softbox can also use with Godox or Profoto light sources when a corresponding speed ring(optional) is used.

06
Included:

Godox QR-P70 Softbox
Inner Diffuser
Front Diffuser
Carrying Case

QR-P90
Godox quick release parabolic softbox adopts an impressive quick release system for rapid setup and breakdown. Highly versatile and compatible, it provides you reliable light quality and various creative expressions. Available in 3 different sizes, this fast and easy to use softbox is an ideal companion for your indoor and on location shootings.

02
Create Your Own Lighting
This softbox has a reflective silver interior to render a punchy high contrast. The removable inner and front fabric diffusers offer you different light softening options to get the perfect look you like.The fabric grid (optional – not included) is available to narrow the beam spread for more precise control.

03
Lift to Open
Effortless setup-simply lift the rods from the speed ring until they click in place. Quick breakdown-simply lift the rod slightly while pushing its button, then you can pack to next job.

04
Small SpeedRing
The speed ring is designed to be as small as possible to make the softbox kit easier to carry and storage during the photography journey.

05
Versatile Compatibility
Compatible with a wide range of Bowens mount strobes and continuous lights, this softbox can also use with Godox or Profoto light sources when a corresponding speed ring(optional) is used.

06
Included:

Godox QR-P90 Softbox
Inner Diffuser
Front Diffuser
Carrying Case

Godox QS series are available in several power versions from 300Ws to 1200Ws, they are characterized by a range of flash energy regulation in the range of 5 degrees of aperture (1/1 - 1/32, with an accuracy of 0.1 EV). Recycle time to full flash energy in less than 1.5 seconds. At minimal power, it achieves a very short flash duration, only 1/2000s (t = 0.1), which allows free shooting during the session. The flash color temperature is 5600K and may change within ± 200K depending on the flash energy set.

Built-in System X receiver enables remote flash firing (until X-Sync), flash energy control and many more. It is also possible to use the 3.5 mm Jack socket and connect the lamp with triggers of other brands.

Back panel of the lamp is simple and functional. The LCD screen showing the lamp settings is also easy to read from a large angle. Next to it is a handy knob for adjusting the flash output, changing the radio communication channel and the group of lamps. Placed under the LCD screen a series of five buttons gives quick access to all settings and functions of the lamp. The 150 W halogen pilot light can operate independently of the flash output (brightness can be set manually), or be coupled with flash energy (proportional). In addition, it can be turned off automatically for a flash or stay on without interruption.

With the lamp you can use a wide range of light modifiers, such as: bowls, softboxes, spotlights, beauty disheres, and others are fitted with Bowens accessories.

Set contains:

Godox QS300II lamp
power cable
modeling lamp
flashtube cover
original packaging.

the QS400II Flash Head from Godox is a 5600K daylight-balanced flash source with sophisticated core and convenience features at an affordable price point. The head features 0.3-1.5 sec. recycling with flash durations as short as 1/2000 sec. Power is variable from 1/32 to full power, adjustable in 50 steps, while the 150W modeling light has a Proportional mode to aid in light placement and a Percentage mode that adjusts brightness from 5 to 100%. Settings are accessed via rear panel push buttons and displayed on the easy-to-read LCD screen. Triggering options include sync cord, test button, and slave triggering. The QS400II has a built-in 32-channel X1 radio system, making wireless function control possible with separate purchase of the XT16, FT16 or X1 transmitter. The head also has an anti-pre-flash function that makes it easy to work with point-and-shoot and other cameras that employ pre-flash. The QS400II weighs in at 6.0 lb, making it easy to assemble a kit with 2 or more heads without having to lug a heavy case around. The QS400II has a Bowens front accessory mount allowing it to use Godox modifiers as well as accessories from the many manufacturers that use this system. The head has a tilting stand mount and runs on 100 to 120 VAC mains power.

Built-In 2.4 GHz Wireless X System
Use TTL wireless trigger X1 as well as power remotes XT16 or FT16 to wirelessly control the head's power, modeling light, triggering, and more. The system has 32 radio channels and 16 groups.
Fast Recycling and Flash Duration
The QSII series features 0.3 to 1.5 sec recycling and 1/800 to 1/2000 sec flash durations.
Precise Power Adjustment
Power can be adjusted from 1/32 to 1/1 (6 stops) in 50 steps in 0.1 increments
The 150 W modeling light has 3 modes: Off, Proportional, and Percentage (5 to 100%)
Slave Trigger Modes
The flash head has Off, S1, and S2 slave trigger modes. The head can sync with cameras that fire one pre-flash.
Easy Operation
Keyboard and multi-function buttons
Easily read LCD screen displays settings and functions
Safe and Reliable
Glass flash tube and modeling light cover and precise power isolation.

the QS600II Flash Head from Godox is a 5600K daylight-balanced flash source with sophisticated core and convenience features at an affordable price point. The head features 0.3-1.5 sec. recycling with flash durations as short as 1/2000 sec. Power is variable from 1/32 to full power, adjustable in 50 steps, while the 150W modeling light has a Proportional mode to aid in light placement and a Percentage mode that adjusts brightness from 5 to 100%. Settings are accessed via rear panel push buttons and displayed on the easy-to-read LCD screen. Triggering options include sync cord, test button, and slave triggering. The QS600II has a built-in 32-channel X1 radio system, making wireless function control possible with separate purchase of the XT16, FT16 or X1 transmitter. The head also has an anti-pre-flash function that makes it easy to work with point-and-shoot and other cameras that employ pre-flash. The QS600II weighs in at 6.4 lb, making it easy to assemble a kit with 2 or more heads without having to lug a heavy case around. The QS600II has a Bowens front accessory mount allowing it to use Godox modifiers as well as accessories from the many manufacturers that use this system. The head has a tilting stand mount and runs on 100 to 120 VAC mains power.

Built-In 2.4 GHz Wireless X System
Use TTL wireless trigger X1 as well as power remotes XT16 or FT16 to wirelessly control the head's power, modeling light, triggering, and more. The system has 32 radio channels and 16 groups.
Fast Recycling and Flash Duration
The QSII series features 0.3 to 1.5 sec recycling and 1/800 to 1/2000 sec flash durations.
Precise Power Adjustment
Power can be adjusted from 1/32 to 1/1 (6 stops) in 50 steps in 0.1 increments
The 150 W modeling light has 3 modes: Off, Proportional, and Percentage (5 to 100%)
Slave Trigger Modes
The flash head has Off, S1, and S2 slave trigger modes. The head can sync with cameras that fire one pre-flash.
Easy Operation
Keyboard and multi-function buttons
Easily read LCD screen displays settings and functions
Safe and Reliable
Glass flash tube and modeling light cover and precise power isolation.

Built for speed, the QT400IIIM Flash Head from Godox is a 5600K daylight-balanced flash source with sophisticated features and advanced technology. The head features 0.01-0.9 sec recycling with flash durations as short as 1/29,600 sec. The QT400IIIM offers power that's variable from 1/256 to full power, while the 40W LED modeling light's output is variable as well. Settings are accessed via rear panel push buttons and displayed on the easy-to-read LCD screen. The head has several flash modes for performance options. Ideal for most shooting situations, Stable Color Temperature mode prioritizes precise 5600K color rendition. High-Speed mode favors short flash durations for ultra-sharp capture of peak action in sports or for creative studio work like freezing splashes or water droplets. The QT400IIIM also supports High-Speed Sync enabling the use of shutter speeds as short as 1/8000 sec allowing you to use wider apertures and other creative effects.

The QT400IIIM has built-in 2.4 GHz 32-channel wireless X technology. Using an optional X1, X2, or XPro transmitter, you can control selection of HSS and High-Speed modes, modeling light modes, remote triggering, and more at distances up to 164'. The head also has S1/S2 slave triggering that makes it easy to work cameras that employ pre-flash. Additionally, the QT400IIIM has a Bowens front accessory mount, allowing it to use Godox modifiers as well as accessories from the many manufacturers that use this system.

Multiple Flash Modes and Precise Color Temperature
Stable Color Temperature Mode maintains color temperature at 5600K (+/-200K), an ideal choice for standard photography
High-Speed Flash Mode favors short flash durations over color fidelity which ranges from 5400 to 9500K
High-Speed Sync Mode allows you to shoot at sync speeds as short as 1/8000 sec for wide aperture use or creative effects
Multi-flash Mode lets you create images of movement such as a golf club swinging by combining a succession of actions into one simple photo
Fast Recycling and Short Flash Durations
Fast recycling lets you fire up to 20 images per second and short flash durations make sure you freeze action without missing the peak moment
Built-in 2.4 GHz Wireless X System
Compatible with select Godox transmitters for controlling the head's power, modeling light, triggering, and more
Precise Power Adjustment
Power can be adjusted from 1/256 to 1/1
Slave Trigger Modes
Built-in S1 and S2 slave trigger modes
Easy Operation
Mode and multi-function buttons
Easily read LCD screen displays settings and functions

Built for speed, the QT400IIM Flash Head from Godox is a 5600K daylight-balanced flash source with sophisticated core and convenience features and the kind of technology and flexibility that is the hallmark of advanced equipment. The head features 0.05-0.7 sec recycling with flash durations as short as 1/22,988 sec. The QT400IIM offers power that's variable from 1/128 to full power, while the 150W modeling light's output is variable as well. Settings are accessed via rear panel push buttons and displayed on the easy-to-read LCD screen. The head has several flash modes for performance options. Ideal for most shooting situations, Stable Color Mode prioritizes precise 5600K color rendition. High-Speed Mode favors short t0.1 flash durations for ultra-sharp capture of peak action in sports or for creative studio work like freezing splashes or water droplets. The QT400IIM also supports High-Speed Sync enabling the use of shutter speeds as short as 1/8000 sec allowing you to use wider apertures and other creative effects.

The QT400IIM has built-in 2.4 GHz 32-channel wireless X technology. Using an optional XT16, FT16, XT32, or X1 transmitter you can control selection of HSS and High-Speed modes, modeling light modes, remote triggering and more at distances up to 164'. The head also has S1/S2 slave triggering that makes it easy to work cameras that employ pre-flash. The QT400IIM weighs in at 6.5 lb, making it possible to assemble a kit with 2 or more heads without having to lug a heavy case around. The QT400IIM has a Bowens front accessory mount allowing it to use Godox modifiers as well as accessories from the many manufacturers that use this system. The head has a tilting stand mount and runs on 100 to 120 VAC mains power.

Multiple Flash Modes and Precise Color Temperature
Stable Color Mode maintains color temperature at 5600K (+/-200K). Ideal choice for standard photography
High-Speed Flash Mode favors short flash durations over color fidelity which ranges from 5400 to 9000K
High-Speed Sync Mode allows you to shoot at sync speeds as short as 1/8000 sec for wide aperture use or creative effects
Fast Recycling and Short Flash Durations
Fast recycling and short flash durations make sure you freeze action without missing the peak moment
Built-in 2.4 GHz Wireless X System
Use a Godox transmitter to control the head's power, modeling light, triggering and more. The system has 32 radio channels and 16 groups.
Precise Power Adjustment
Power can be adjusted from 1/128 to 1/1
Slave Trigger Modes
The flash head has S1 and S2 slave trigger modes.
Easy Operation
Keyboard and multi-function buttons
Easily read LCD screen displays settings and functions

Built for speed, the QT600IIM Flash Head from Godox is a powerful 5600K daylight-balanced flash source with sophisticated core and convenience features and the kind of technology and flexibility that is the hallmark of advanced equipment. The head features 0.05-0.9 sec recycling with flash durations as short as 1/19,606 sec. The QT600IIM offers power that's variable from 1/128 to full power, while the 150W modeling light's output is variable as well. Settings are accessed via rear panel push buttons and displayed on the easy-to-read LCD screen. The head has several flash modes for performance options. Ideal for most shooting situations, Stable Color Mode prioritizes precise 5600K color rendition. High-Speed Mode favors short t0.1 flash durations for ultra-sharp capture of peak action in sports or for creative studio work like freezing splashes or water droplets. The QT600IIM also supports High-Speed Sync enabling the use of shutter speeds as short as 1/8000 sec allowing you to use wider apertures and other creative effects.

The QT600IIM has built-in 2.4 GHz 32-channel wireless X technology. Using an optional XT16, FT16, XT32, or X1 transmitter you can control selection of HSS and High-Speed modes, modeling light modes, remote triggering and more at distances up to 164'. The head also has S1/S2 slave triggering that makes it easy to work cameras that employ pre-flash. The QT600IIM weighs in at 6.5 lb, making it possible to assemble a kit with 2 or more heads without having to lug a heavy case around. The QT600IIM has a Bowens front accessory mount allowing it to use Godox modifiers as well as accessories from the many manufacturers that use this system. The head has a tilting stand mount and runs on 100 to 120 VAC mains power.

Multiple Flash Modes and Precise Color Temperature
Stable Color Mode maintains color temperature at 5600K (+/-200K). Ideal choice for standard photography
High-Speed Flash Mode favors short flash durations over color fidelity which ranges from 5400 to 9000K
High-Speed Sync Mode allows you to shoot at sync speeds as short as 1/8000 sec for wide aperture use or creative effects
Fast Recycling and Short Flash Durations
Fast recycling and short flash durations make sure you freeze action without missing the peak moment
Built-in 2.4 GHz Wireless X System
Use a Godox transmitter to control the head's power, modeling light, triggering and more. The system has 32 radio channels and 16 groups.
Precise Power Adjustment
Power can be adjusted from 1/128 to 1/1
Slave Trigger Modes
The flash head has S1 and S2 slave trigger modes.
Easy Operation
Keyboard and multi-function buttons
Easily read LCD screen displays settings and functions

his Q-type clip is designed for hanging battery pack, installing different flashes with lamp adapter(sold separately), etc
High quality material with strong bearing
Several 1/ 4 and 3 / 8 bracket mounting holes to adjust light ankles flexibly.
Adjustable range from 3 to 45mm
Quickly fix the clip by the screw