The PC-60 Phone Holder is designed to easily clamp your cell phone. The PC-60 can be used in different ways. The convenient ring on the back of the holder reduces the likelihood of accidentally dropping the phone. In addition, you can easily put your phone on a table or other surface with the PC-60. You can place your mobile horizontally or vertically to view movies or photos or record new videos more easily.

Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto PC-60 Phone Holder (Arca-Swiss) with Ring Black
The PC-60 Phone Holder is designed to easily clamp your cell phone. The PC-60 can be used in different ways. The convenient ring on the back of the holder reduces the likelihood of accidentally dropping the phone. While holding your phone, you can put the ring around your finger to keep a better grip on your mobile. The ring can rotate in any direction so that your finger easily fits into it. In addition, you can easily put your phone on a table or other surface with the PC-60. You can place your mobile horizontally or vertically to view movies or photos or record new videos more easily. This is also very convenient for video calling. The Arca-Swiss dovetail makes it possible to place the phone holder on an Arca-Swiss compatible ball head. Also, the phone holder has a ¼-inch screw hole allowing it to be placed on a magic arm or other tripod with ¼-inch thread.

The phone clamp has a minimum width of 56 millimetres and can be extended to no less than 90 millimetres, so any smartphones will fit. With the handy locking button, the width always remains the same. de PC-90II weight 64 grams, therefore you can easily put it in your photo bag.

PCL-60 PANNING CLAMPS
Only involve innovation in the our classic works, can we achieve sustainable development in this Era of survival of the fittest.

304 Stainless Steel
Hard Anodized
FASTER AND EASIER INSTALLING AND REMOVING

ARCA-SWISS STYLE

HOLLOW OUT DESIGN, WEIGHS ONLY 125G

Key Features
For 2.3 to 3.7" Wide Smartphones
2 x Fold-Out Legs for Tabletop Use
1 x 1/4" Threaded Tripod Connector
1 x Arca-Type Dovetail Connector
1 x Cold Shoe Mount
300° Phone Tilt
360° Phone Rotation
Integrated Tabletop Rubber Padded
Integrated Smartphone Holder Padding
Angled Phone Holder for Better Security
Maximizing your mobile device's mounting abilities, the Leofoto Tabletop & Tripod Folding Smartphone Holder can be used as a stand on a flat surface, or attached to a tripod or light stand via 1/4" female and Arca-type dovetail connections. When the base is swiveled out into a tabletop stand, two legs can pivot out in opposite directions to provide increased stability. Speaking of which, integrated rubber pads help to keep the stand steady on slick surfaces. In either configuration, the smartphone holder can tilt up to 300° and rotate 360°, letting you shoot images, record video, livestream, and chat in portrait, landscape, or anywhere in between.

Additional Features
Angled clamps help to hold your phone securely in the mount
Cold shoe for optional accessories, such as an external mic or LED light
Durable metal construction

Leofoto universal quick-release plates are designed for most of cameras. Each plate is precision-machined from aluminium alloy and hard anodized. All Leofoto quick-release plates are with Arca standard dovetail which are compatible with any Arca style clamps in the market.
Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto Universal Quick Releae Plates
Leofoto universal quick-release plates are designed for most of cameras. Each plate is precision-machined from aluminium alloy and hard anodized. All Leofoto quick-release plates are with Arca standard dovetail which are compatible with any Arca style clamps in the market.

The high-quality Leofoto RH-1L panning clamp with Arca-Swiss QP-70 quick release plate is a quick release clamp with panning capability that can be used as an alternative or replacement for the standard Arca-Swiss quick release clamp on various Leofoto tripod heads.
Leofoto RH-1L panning clamp with QP-70 quick release plate
The high-quality Leofoto RH-1L panning clamp with Arca-Swiss QP-70 quick release plate is a quick release clamp with panning capability that can be used as an alternative or replacement for the standard Arca-Swiss quick release clamp on various Leofoto tripod heads. The RH-1L allows very precise positioning of the camera for critical panorama work, and the dial locks the head in exactly the right place.

Interchangeable panning clamp quick release
The professional Leofoto RH-1L panning clamp is CNC machined from black anodized aircraft aluminum, making this clutch very strong yet lightweight. A standard Leofoto coupling can be easily exchanged for the RH-1L panning clamp by loosening the central Allen screw. The screw hole of the RH-1L is 3/8-inch and therefore universally usable for professional applications. The Leofoto RH-1L weighs only 78 grams without the quick release plate, its diameter is 52mm and its thickness is 18mm. Thanks to the built-in spirit level, you can easily level a tripod head when using the RH-1L.

Quick-action coupling with spirit level
The RH-1L has a screw-lock quick release that allows you to tighten the interchangeable QP-70 plate as much as you like, which is useful if you want to move the camera slightly on the tripod head. The professional, 7cm long and 38mm wide QP-70 Arca-Swiss Quick Release Plate allows you to mount your camera on this plate in no time. The 20mm wide clamps of the RH-1L release plate ensure maximum locking of the QP-70 release plate.

The Leofoto VH-10 monopod head is in a class of its own. This ultra-light tripod head is specially designed for use on monopods. This 90mm high tripod head is made from aircraft aluminium for maximum strength combined with low weight and is black anodised for high durability. The double tilt option gives you similar freedom of movement to a ball head, but the weight is much lower thanks to the lack of a heavy ball.

Product Details
Panning base travel: 360°
Length: 374mm
Width: 227mm
Height: 155mm
Base Diameter: 60mm
Max balanced load: 4kg
Working height: 1450mm
Folded length: 790mm
Weight: 3.16kg
Category: Video
Description The VT-10 Video head provides smooth motion with a payload capacity of up to 4kg while being supported by an easy to use LF-60 alluminium tripod with flip lock legs.

Product Details
Tilt range: +90°-75
Panning base travel: 360°
Length: 421mm
Width: 180mm
Height: 130mm
Base diameter: 80mm
Max balanced load: 4kg
Tripod working height: 1820/1330/860mm
Folded length: 880mm
Category: Video
Description
The VT-20 Video head will allow you to create silky smooth motion supported by the high-quality LF-75 Aluminium tripod. The Leofoto VT-20 with the LF-75 kit consists of a video tripod including the liquid head that has been specially developed for modern video filmmakers. This high-quality video tripod is made of aluminum and intended for advanced users and professionals. The tripod comes with the liquid-damped Leofoto VT-20 panning head tripod head. The base plate including tripod head is removable and provided with a separate handle for use ‘from the loose wrist’.

Key Features
For Flat Base Tripod Heads
Long Handle: 161mm Height
Integrated Hook
75mm Diameter
3/8"-16 Mount
Bubble Level
Durable Aluminum Construction
Ideal for flat-base tripod heads, the YB-75LP 75mm Leveling Base with Platform from Leofoto features a long handle for an easier grip and an integrated hook for adding a weight bag. An APB O-ring keeps the removable hook secure.

Crafted from hard-anodized aluminum, this durable base adds a negligible 10.6 oz to your existing tripod setup, while a standard 3/8"-16 top mounting screw accommodates most tripod heads. The YB-75LP also features a built-in bubble level.

Long handle: 161mm height
Integrated hook for weight bag
75mm leveling base with 3/8"-16 screw
Hard anodized plating protects base from corrosion
Bubble level for aligning your camera for horizontal shooting

Key Features
Load Capacity: 8.8 lb
Max Height: 13.4"
Min Height: 4.5"
Folded Length: 9.5"
Leg Sections: 1
Weight: 15.2 oz
Removable, Extendable Center Column
Arca-Type Compatible Ball Head
Quick-Release Plate
Doubles as Handheld Pole
The black Sirui 3T-35K Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Key Features
Load Capacity: 8.8 lb
Max Height: 13.4"
Min Height: 4.5"
Folded Length: 9.5"
Leg Sections: 1
Weight: 15.2 oz
Removable, Extendable Center Column
Arca-Type Compatible Ball Head
Quick-Release Plate
Doubles as Handheld Pole
The red Sirui 3T-35R Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Key Features
Compatible with Sony and Canon Cameras
Wireless Bluetooth Communication
Bluetooth Receiver
Detachable Remote Commander
Accessory Port
Aluminum Construction
The 3T-R Table Tripod Remote Control Tripod from Sirui is compatible with Sony and Canon cameras and is designed as an effective solution for vloggers.

Bluetooth Receiver
There is a Bluetooth receiver attached to the back of the tripod, which is specially designed for those Sony cameras that have no native Bluetooth. Insert the receiver into the multi-terminal of the camera and pair the two devices. After paired successfully, the camera can be controlled directly via the remote commander.
Detachable Remote Commander
The tripod features a detachable remote commander. The commander can control the camera within 33' to perform such functions as shooting, focusing, zooming, and more.
Two-ln-One Design
Fold up the legs to use as a grip or spread them to use as a tripod.
Quick Release System
A quick release plate is designed for mounting cameras in a quick and simple way.
Accessory Port
A variety of accessories can be connected to the tripod via the 1/4"-20 screw port to form a powerful setup.
Versatility
The grip is smoothly contoured for added comfort. There are built-in magnets in each of the legs, preventing them from opening. In addition, the legs have rubber feet to guarantee a firm hold on the ground.

Key Features
Load Capacity: 22 lb
Maximum Height: 55.1"
Minimum Height: 10.2"
Folded Length: 14"
Leg Sections: 5
Weight: 2.7 lb
Aluminum Legs
180° Reverse-Folding Legs
Detachable Monopod Leg
Y-10 Ball Head
The A1005 Aluminum Tripod with Y-10 Ball Head from Sirui is a 5-section tripod that weighs 2.7 lb. The aluminum legs fold a full 180° in reverse to make it a compact 14". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.

The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

The 2.7 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
The aluminum legs have 5-sections and the legs fold in reverse to a compact 14"
Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1004K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1004K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1004K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Ball head included
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. Furthermore, it has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Best quality aluminum in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 2,0kg
- Max. Load capacity: 12kg
- Material: Aluminium

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. load capacity: 20kg - Packing size: 20kg Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1004K tripod/monopod Alu
1x SIRUI K-10X ball head Alu with interchangeable plate
3x metal spikes
1x carrying bag

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1204K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1204K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1204K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Including ball head K-10X
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. It also has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Carbon 8-layer in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 1.68kg
- Max. Load capacity: 12kg
- Material: Carbon

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1204K tripod/monopod carbon
1x SIRUI K-10X ball head aluminium with interchangeable plate
3x metal spikes
1x carrying bag

Brand Sirui
Color Black
Compatible Devices Still Camera and Camcorder
Material Carbon Fiber
Item Weight 1.62 Pounds
Weight Limit 22 Pounds
Model Name AM-223+B-00K
Maximum Height 13.8 Inches
Tripod Head Type Ball Heads
Minimum Height 2.3 Inches
Compact Tripod: Material: carbon fiber; Color: Black; Weight: 1.17lbs (tripod) + 0.45lbs (ball head); Sections: 3; Min Tube: 16mm/0.63"; Max Tube: 22mm/0.87"; Min Height: 58mm/2.3"; Max Height: 350mm/13.8"; Retracted Height: 215mm/8.5"; Max Load( tripod) : 33lbs/15KG; Max Load( ball head) : 22lbs/10KG.
Functional characteristics: easy adjustment: 3-section column legs with twist leg locks enables you to adjust the working height from 2. 3" To 13. 8" Instantly; loosen and remove the rubber feet, and replace them with the stainless steel spikes
Material characteristics: The whole set weights only 1. 62 lbs. , So it is easy to carry everywhere and suitable for shooting insects and plants. Except for its lightweight and portability, there are other characteristics of excellent durability and high temperature resistance; It also have outstanding stability, flexibility and load capacity. Minimum tube Diameter is 0. 63", but it is able to bear heavy photographic equipment's
Excellent process: The mounting screw is interchangeable from 3/8" To 1/4"
What You Get: 1 x SIRUI AM-223 Mini Tripod; 1 x B-00K Ball Head; 3 x Stainless Steel Spikes; 2 x Allen Wrench; 1 x Portable Bag; 6 years warranty and prompt customer service.

Extreme lightness and very high stability combined in the AM2 series tripods
The tripods of the SIRUI AM2 series with their full equipment and compact dimensions are the ideal introduction to professional photography. Here innovative design meets ergonomic functionality. They are always a loyal and reliable companion for the ambitious and professional photographer.

The ideal tripod to have with you at all times: super compact and light but still extremely stable carbon tripod.

The legs are made of 10-ply carbon fibre, which activates three factors:
1. lightness
2. vibration resistance
3. temperature neutrality

The strong ball head also holds DSLR cameras effortlessly.

- Compact tripod with ball head
- Two leg positions for normal or extremely low working height
- Non-slip feet with rubber coating and screw-in stainless steel spikes
- 1/4" accessory connection for flexi arms, microphones etc.
- High quality ball head with quick release lever for extra strong hold
- Safety Lock System to prevent accidental slipping of the camera
- 360° rotation with scale in 10° steps
- Aluminium of best quality

Technical Data Tripod AM-225
- Height: 6 - 119,5cm
- Height (with head): 13,5 - 126,8cm
- Height when folded: 39,5cm
- Height when folded (with head): 46,5cm
- Sections: 5
- Tube diameter: 10-22mm
- Weight: 0,72kg
- Weight (with head): 0,94kg
- Max. Load capacity: 6kg
- Material: 10x Carbon
- Colour: black

Technical data ball head B-00K
- Height: 70mm
- Ball diameter: 29mm
- Base diameter: 41mm
- Weight: 0,21kg
- Max. Max. load: 10kg
- Material: aluminium
- Colour: black

Scope of delivery
1x SIRUI AM-225 tripod Carbon
1x SIRUI B-00K ball head aluminium
1x SIRUI TY-C10 quick release plate aluminium
3x stainless steel spikes
1x snap hook
1x transport bag
*Camera not included

Load Capacity: 12kg
Ultra low profile design
Leg Sections: 4
Weight: 1.4kgs
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-254 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.4kg
Max. load: 12kg
Minimum height: 145mm
Maximum height: 1270mm
Closed size: 525mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-254 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Load Capacity: 15kg
Ultra low profile design
Leg Sections: 4
Weight: 1.6kg
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-284 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.6kg
Max. load: 15kg
Minimum height: 150mm
Maximum height: 1270mm
Closed size: 530mm
Leg diameter 29.4mm – 18.6mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-284 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual