Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1204K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1204K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1204K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Including ball head K-10X
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. It also has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Carbon 8-layer in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 1.68kg
- Max. Load capacity: 12kg
- Material: Carbon

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1204K tripod/monopod carbon
1x SIRUI K-10X ball head aluminium with interchangeable plate
3x metal spikes
1x carrying bag

Brand Sirui
Color Black
Compatible Devices Still Camera and Camcorder
Material Carbon Fiber
Item Weight 1.62 Pounds
Weight Limit 22 Pounds
Model Name AM-223+B-00K
Maximum Height 13.8 Inches
Tripod Head Type Ball Heads
Minimum Height 2.3 Inches
Compact Tripod: Material: carbon fiber; Color: Black; Weight: 1.17lbs (tripod) + 0.45lbs (ball head); Sections: 3; Min Tube: 16mm/0.63"; Max Tube: 22mm/0.87"; Min Height: 58mm/2.3"; Max Height: 350mm/13.8"; Retracted Height: 215mm/8.5"; Max Load( tripod) : 33lbs/15KG; Max Load( ball head) : 22lbs/10KG.
Functional characteristics: easy adjustment: 3-section column legs with twist leg locks enables you to adjust the working height from 2. 3" To 13. 8" Instantly; loosen and remove the rubber feet, and replace them with the stainless steel spikes
Material characteristics: The whole set weights only 1. 62 lbs. , So it is easy to carry everywhere and suitable for shooting insects and plants. Except for its lightweight and portability, there are other characteristics of excellent durability and high temperature resistance; It also have outstanding stability, flexibility and load capacity. Minimum tube Diameter is 0. 63", but it is able to bear heavy photographic equipment's
Excellent process: The mounting screw is interchangeable from 3/8" To 1/4"
What You Get: 1 x SIRUI AM-223 Mini Tripod; 1 x B-00K Ball Head; 3 x Stainless Steel Spikes; 2 x Allen Wrench; 1 x Portable Bag; 6 years warranty and prompt customer service.

Extreme lightness and very high stability combined in the AM2 series tripods
The tripods of the SIRUI AM2 series with their full equipment and compact dimensions are the ideal introduction to professional photography. Here innovative design meets ergonomic functionality. They are always a loyal and reliable companion for the ambitious and professional photographer.

The ideal tripod to have with you at all times: super compact and light but still extremely stable carbon tripod.

The legs are made of 10-ply carbon fibre, which activates three factors:
1. lightness
2. vibration resistance
3. temperature neutrality

The strong ball head also holds DSLR cameras effortlessly.

- Compact tripod with ball head
- Two leg positions for normal or extremely low working height
- Non-slip feet with rubber coating and screw-in stainless steel spikes
- 1/4" accessory connection for flexi arms, microphones etc.
- High quality ball head with quick release lever for extra strong hold
- Safety Lock System to prevent accidental slipping of the camera
- 360° rotation with scale in 10° steps
- Aluminium of best quality

Technical Data Tripod AM-225
- Height: 6 - 119,5cm
- Height (with head): 13,5 - 126,8cm
- Height when folded: 39,5cm
- Height when folded (with head): 46,5cm
- Sections: 5
- Tube diameter: 10-22mm
- Weight: 0,72kg
- Weight (with head): 0,94kg
- Max. Load capacity: 6kg
- Material: 10x Carbon
- Colour: black

Technical data ball head B-00K
- Height: 70mm
- Ball diameter: 29mm
- Base diameter: 41mm
- Weight: 0,21kg
- Max. Max. load: 10kg
- Material: aluminium
- Colour: black

Scope of delivery
1x SIRUI AM-225 tripod Carbon
1x SIRUI B-00K ball head aluminium
1x SIRUI TY-C10 quick release plate aluminium
3x stainless steel spikes
1x snap hook
1x transport bag
*Camera not included

Load Capacity: 12kg
Ultra low profile design
Leg Sections: 4
Weight: 1.4kgs
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-254 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.4kg
Max. load: 12kg
Minimum height: 145mm
Maximum height: 1270mm
Closed size: 525mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-254 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Load Capacity: 15kg
Ultra low profile design
Leg Sections: 4
Weight: 1.6kg
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-284 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.6kg
Max. load: 15kg
Minimum height: 150mm
Maximum height: 1270mm
Closed size: 530mm
Leg diameter 29.4mm – 18.6mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-284 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Key Features
Professional 3-Section Tripod, 75mm Bowl
Broadcast Quality Fluid Head
13.2 lb Payload
Includes Ground and Mid-Level Spreader
17-63" Tripod Working Height
Stepped Counterbalance
0-3 Grades of Pan and Tilt Drag
Includes Pan Bar
The Sirui BCT-2203 Carbon Fiber Tripod & BCH-10 Video Head Bundle features a professional 3-section tripod with a 75mm bowl and a broadcast quality fluid head with a 13.2 lb payload. The tripod includes a ground spreader and mid-level spreader and offers a 17-63" working height. The head comes with a pan bar and provides stepped counterbalance and 0-3 grades of pan and tilt drag.

Sirui BCT-2203 Professional 3-Section Carbon Fiber Video Tripod with 75mm Bowl
The BCT-2203 Professional 3-Section Carbon Fiber Video Tripod from Sirui features a 75mm bowl for compatible fluid heads and supports up to 22 lb loads. It offers a 17 to 63" height range and comes with ground and mid-level spreaders, both of which are removable. The ground spreader has a rubber underside for safer and more secure placement on flat surfaces. When the ground spreader is removed, dual-spiked feet are revealed for use on soft ground.

The 10-layer carbon fiber tripod is designed with multi-tube legs for enhanced stability and reduced vibration. Each leg is adjustable individually and secured with oversized twist leg locks that are easy to handle.

Key Features
75mm bowl
22 lb payload
17 to 63" height range
Removable ground and mid-level spreaders included
Dual-spiked feet
Multi-tube legs
Oversized twist leg locks
Sirui BCH-10 Video Head
For professional video applications, the Sirui BCH-10 Video Head is based off a 75mm ball mount for use on compatible tripod legs or other accessories such as sliders and jibs. Friction adjustment can be applied in 3 steps, with the 0 setting providing nearly-frictionless movement. A 3-step adjustable counterbalance can compensate for cameras weighing up to 13 pounds. The rosette-mounted pan handle easily extends for greater leverage and a second rosette on the side can be used to mount a second handle. The calibrated camera platform secures the camera plate with dual locks, preventing the camera from accidentally falling off the head during adjustment. To save time when balancing your camera, the platform is etched with calibrated measurements. Aluminum alloy is used in the construction for durability while maintaining a manageable weight.

Features
3 levels of friction control for panning and tilting, with 0 position for near-frictionless operation
3 levels of counterbalance adjustment
Dual bubble levels: Illuminated base bubble level and second top bubble level
Dual Safety Lock Quick Release Platform: Prevents the camera from sliding off the head while aligning for proper balance
Calibrated Quick Release Platform: Easily reposition your equipment using the etched scale on the platform
Telescoping handle
Integrated 75mm ball mount
Separate pan and tilt-lock knobs
Quick-release plate included

Key Features
Professional Heavy-Duty 3-Section Tripod
100mm Bowl
Broadcast Quality Fluid Head
39.5 lb Payload
Includes Ground and Mid-Level Spreader
17.5-63" Tripod Working Height
Stepped Counterbalance
0-7 Grades of Pan and Tilt Drag
Dual Pan Bars
The Sirui BCT-3203 Carbon Fiber Tripod & BCH-30 Video Head Bundle features a professional, heavy-duty 3-section tripod with a 100mm bowl and a broadcast quality fluid head with a 39.5 lb payload. The tripod includes a ground spreader and mid-level spreader and offers a 26.5-59" working height. The head comes with two pan bars and provides stepped counterbalance and 0-7 grades of pan and tilt drag.

Sirui BCT-3203 Professional 3-Section Carbon Fiber Video Tripod with 100mm Bowl
The BCT-3203 Professional 3-Section Carbon Fiber Video Tripod from Sirui features a 100mm bowl for compatible fluid heads and supports up to 40 lb loads. It offers a 17.5 to 63" height range and comes with ground and mid-level spreaders, both of which are removable. The ground spreader has a rubber underside for safer and more secure placement on flat surfaces. When the ground spreader is removed, dual-spiked feet are revealed for use on soft ground.

The 10-layer carbon fiber tripod is designed with multi-tube legs for enhanced stability and reduced vibration. Each leg is adjustable individually and secured with oversized twist leg locks that are easy to handle.

Key Features
100mm bowl
40 lb payload
17.5 to 63" height range
Removable ground and mid-level spreaders included
Dual-spiked feet
Multi-tube legs
Oversized twist leg locks
Sirui BCH-30 Video Head
For professional video applications, the Sirui BCH-30 Video Head is based off a 100mm ball mount for use on compatible tripod legs or other accessories such as sliders and jibs. Friction adjustment can be applied in 7 steps, with the 0 setting providing nearly-frictionless movement. A 13-step adjustable counterbalance can compensate for cameras weighing up to 39 pounds. The BCH-20 is controlled with dual rosette-mounted pan handles. Both pan handles easily extend for greater leverage when using heavier cameras. Extra camera-mount screws are kept in 1/4"-20 and 3/8"-16 tapped holes on the sides of the head. When vacated, these holes can also be used as accessory mounting points. The calibrated camera platform secures the camera plate with dual locks, preventing the camera from accidentally falling off the head during adjustment. To save time when balancing your camera, the platform is etched with calibrated measurements. Aluminum alloy is used in the construction for durability while maintaining a manageable weight.

Features
7 levels of friction control for panning and tilting, with 0 position for near-frictionless operation
13 levels of counterbalance adjustment
Dual bubble levels: Illuminated base bubble level and second top bubble level
Dual Safety Lock Quick Release Platform: Prevents the camera from sliding off the head while aligning for proper balance
Calibrated Quick Release Platform: Easily reposition your equipment using the etched scale on the platform
Dual telescoping handles
Extra 1/4" and 1/8" screws stored in the integrated threads
Integrated 100mm ball mount
Separate pan and tilt-lock knobs
Quick-release plate included

Aluminium construction
Compatible with the SH-Series video tripods (SH-05, SH-15, SH-25)
Rubber wheels
Wheel lock
Easy to mount the tripod
The Sirui DT-06 is a video tripod dolly designed for use with the the SH-Series tripods (SH-05, SH-15, SH-25)

The DT-06 offers smooth, quiet and fast operation via the rubber wheels which can also be locked to secure the dolly and tripod in one location.

A collapsable design ensures the DT-06 is compact and portable for ease of use and transpiration.

High grade aluminium provides a large 50kgs load capacity with a low unit weight (2.92kgs).
Large load capacity (50kgs)

Key Features
Load Capacity: 18 lb
Max Height: 55"
Min Height: 5"
Folded Length: 16.5"
Leg Sections: 4
Weight: 3.6 lb
E-10 Ball Head with TY-50E QR Plate
Reverse-Folding Legs
Short Center Column Included
Custom Padded Case & Shoulder Strap
The ET-1004 Aluminum Tripod with E-10 Ball Head from Sirui is a 4-section aluminum tripod with an included ball head and quick release plate.

With the center column extended, the tripod's maximum height is 55" The tripod weighs 3.6 lb and can support up to 18 lb. An included short center column allows for changeover to shoot macro or from low angles. Also, the center column can be inverted to shoot from under the tripod.

The 4-section legs feature flip locks for easy adjustment and each leg can be independently placed at three position angles and automatically lock in place for secure shooting on uneven ground. The legs on the ET-1004 fold up 180º for compact storage and transport; its folded length is just 16.5". The tripod's rugged spider is made from forged aluminum alloy and the legs are made from economical aluminum alloy for stability, performance and longevity.

The E-10 ball head and a quick-release plate are supplied with the ET-1004 tripod . The ball head provides separate adjustment knobs for panning and locking, the locking knob is metal with a solid grip and wear-resistant surface. The E-10 ball head's locking mechanism can support up to 40 lb and is built to for smooth, vibration-free movement. A bubble-level is supplied for fast and accurate alignment.

Key Features
Load Capacity: 6.6 lb
Maximum Height: 60.4"
Minimum Height: 8.6"
Folded Length: 20.2"
Leg Sections: 4
Aluminum-Constructed Legs
Flip Leg Lock System
Fluid System for Smooth Pans and Tilts
Spring-Assisted Counterbalance
TY-70A Quick-Release Plate
Gain the advantage of using the ET-2004 Aluminum Tripod with VA5 Video Head Kit from Sirui, where features from both the photo and video worlds combine into one tripod. With the quickness of the tripod's flip leg lock system and the compact size of the fluid head, you can be ready to go and capture video at a moment's notice.

Sirui VA-5 Ultra-Compact Video Head
The SIRUI VA-5 Ultra-Compact Video Head uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 6.6 lb. It features independent pan and tilt locks and uses an internal spring-assisted counterbalance mechanism for smoother tilt movements with heavier cameras. A TY-70A quick-release plate comes included, for forward/backward adjustment possible when attached to the head to help balance your camera. A dual safety lock system prevents the plate and your camera from falling off the head when the primary locking mechanism is loosened. To release the plate, simply press the secondary release button. To assist in horizontal alignment of your shots, the head has two bubble levels: one on the base of the head to align the tripod and one on the top of the head to align the camera. One pan handle comes included.

For DSLRs or compact video cameras up to 6.6 lb
Fluid system for smooth pan and tilts
Internal spring-loaded counterbalance mechanism
Quick-release plate with forward/backward adjustment
Dual safety lock system prevents plate from slipping off head
Two bubble levels: one at base of head, one a top of head
Accepts SIRUI TY-50/60/70/70-2 and LP-40/75 and many Arca-compatible quick release plates
Sirui ET-2004 Travel Aluminum Tripod
The ET-2004 Travel Aluminum Tripod from Sirui is a 4-section support with a flip leg lock system that you can disengage to give you the ability to extend the legs along with the standard rapid center column to a maximum height of 57.1". With its three variable leg angles and independent leg spread, the tripod's legs can conform to uneven terrain; splaying the tripod's legs out and switching the standard center column to the included short column, the support can go to a minimum height of 5.3". The legs fold in the reverse to a compact 16.9" to travel with the tripod, and the rubber feet on the legs prevent the tripod from sliding on smooth and flat surfaces. In addition, the feet retract back to reveal metal spikes to further stabilize the support on softer terrain.

Key Features
Works as a Tripod or Selfie Stick
Extends from 15.7 to 54.3" in Height
Supports up to 14.1 oz
Bluetooth Remote Works up to 32.8' Away
Includes Mobile Phone Clamp
Switch Between Portrait/Landscape Mode
Small and Compact
Small and compact, the MS-01K Umbrella Mobile Tripod from Sirui can be configured as either a tripod or a selfie stick. Its supports up to 14.1 oz, has a minimum height of 15.7", and can be extended up to 54.3". Its native mount is a GoPro head, but using the included mobile phone clamp, you'll be able to shoot with smartphones in portrait or landscape mode, and the included Bluetooth remote control works from up to 32.8' away.

General Features
Shoulderless Shooting
With a weight of 0.86 pounds, this can be easily held or shouldered while on the road.
Quick Switch for Extensive Shoots
The MS-01K can be easily configured as either a tripod or a selfie stick.
Break the Framing
Capture more with a smooth extension of the 5-section column to a maximum height of 54.3".
Flexible Angle Adjustments
Shoot at multiple angles with a gradual front or back tilting of the mounting platform. With one simple 90° tweak, you'll be able to capture photos in portrait or landscape mode.
Detachable Bluetooth Remote Shutter
Freeze the moment with a quick press of the Bluetooth remote control shutter from up to 32.8' away.
Solid Umbrella Base
The umbrella base smoothly slides up and down for fast setup.
A Reliable Companion
Get hands free with the leg spreader to shoot steady mobile video, whether recording or live streaming.

Key Features
Load Capacity: 33.1 lb
Maximum Height: 68.1"
Minimum Height: 9.1"
Folded Length: 24.6"
Leg Sections: 4
Weight: 4.5 lb
Aluminum-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The R2004 Aluminum Tripod with E-20 Ball Head set from Sirui combines the lightweight and portable R2004 aluminum leg set with the versatile E-20 ball head with Arca-type quick release system to form a compact and lightweight tripod that is equally at home in the studio or on location.

Sirui R2004 Aluminum Tripod
The 3.7 lb R2004 Aluminum Tripod from Sirui is a 4-section support with aluminum-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

Sirui E-20 Ball Head with TY-50E Plate
The E-20 Ball Head with TY-50E Plate from Sirui is a 12.7 oz aluminum camera support that features an Arca-type compatible quick release system. The head has two separate knobs, the larger knob unlocks to release the ball movement, and the independent pan lock releases the 360° panning base, which has 5° scale markings.

The weight capacity of the ball head is 26.5 lb, which makes it suitable to support large DSLR and medium format cameras. Furthermore, inside the clamp there is a safety stop and on the side of the clamp a security pin release button, which prevents the plate from accidentally sliding and falling out. The included TY-50E plate has a machined eyelet for a hand or shoulder strap.

Arca-type compatible ball head with safety stop and security pin release button
360° panning base with 5° scale increments
Integrated spirit bubble level for balancing
Machined eyelet on the quick release place for a hand or shoulder strap

Key Features
Load Capacity: 33.1 lb
Maximum Height: 64.2"
Minimum Height: 15.2"
Folded Length: 20.7"
Leg Sections: 4
Weight: 2.9 lb
Carbon Fiber-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The 2.9 lb R2204 Carbon Fiber Tripod from Sirui is a 4-section support with carbon fiber-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

SIRUI tripod for studio and large cameras - with center column and bag

The RX series tripods are the largest among the SIRUI tripods. With their high load capacity of 18 to 30kg, they are especially suitable for working in the studio and with large, heavy DSLR and video cameras.

The special feature of the R-2214X is the exchangeable mounting plate. It can be exchanged for the included 75mm adapter half-shell R2X-75A or the also included center column RX-402C. This way, for example, a SIRUI video head can be used on the tripod or the maximum working height can be increased by 38cm with the center column. To facilitate the change between plate and bowl or center column, an Allen key is integrated in the stabilizing hook.

The tubes of the legs are made of 10 layers of carbon, which makes the tripods extremely light but at the same time very stable. Depending on the surface, the non-slip rubber feet can be exchanged for robust stainless steel spikes (included).

- Carbon 10x carbon fiber in 4 sections
- incl. center column RX-402C and adapter half-shell R2X-75A
- center column reversible for ground level shooting
- mounting plate exchangeable against 75mm adapter half-shell or center column
- 3/8" screw for tripod heads, camera or camcorder
- Built-in leveling bubble in the tripod shoulder
- Fixation screw for tripod head
- Easy-action twist locks - half a turn is enough to loosen
- Protective handles for a secure grip in cold and heat
- Stabilizing hook with integrated Allen key

- Weight: 1,6kg (with center column 1,95kg)
- Max. Load Capacity: 18kg
- Height: 11.5 - 145cm (183cm with centre column)
- Pack Size: 51cm (with centre column 59cm)
- Tube Diameter: 18,6 - 29,4mm

Compatibility
Cameras, camcorders, tripod heads with 3/8" thread
SIRUI RX-75B levelling hemisphere

Included indelivery
1x SIRUI R-2214X tripod carbon
1x R2X-75A adapter hemisphere ø75mm
1x mounting plate ø63mm
1x RX-402C center column
3x stainless steel spike
1x carrying bag with strap
*Video head, levelling hemisphere not included in delivery

10-layer carbon fibre in 3 sections
Included centre column
Mounting plate can be swapped for 75mm half ball adapter
Built-in spirit level in the tripod shoulder
Smooth twist locks – a quarter turn is enough to loosen the section
Covers for secure grip in hot and cold conditions
Stabilising hook with integrated Allen key
Weight: 1.7kg
Max. load: 22kg
The RX series tripods are the largest of the SIRUI tripods. With their high load of up to 25kg, they are particularly suited to working in the studio and with large, heavy DSLR and video cameras. The special feature of the RX series is its removable mounting plate. It can be replaced with the 75mm half ball adapter (and can be used with the optional SIRUI Y-75B levelling half ball). This means that it can be used on a SIRUI video tilt head, for example. To make changing between the plate and the half ball easier, an Allen key is integrated into the stabilising hook.

The leg tubes are made from 10-layer carbon fibre, making the tripod extremely lightweight but very stable. Depending on the surface, the non-slip rubber feet can be replaced with robust stainless steel spikes (included).

– 10-layer carbon fibre in 3 sections
– Included carbon fibre centre column
– Mounting plate can be swapped for 75mm half ball adapter
– 3/8 inch screw for tripod heads, camera or camcorder
– Built-in spirit level in the tripod shoulder
– Locking screw for head
– Smooth twist locks – a quarter turn is enough to loosen the section
– Covers for secure grip in hot and cold conditions
– Stabilising hook with integrated Allen key

– Weight: 1.7kg
– Max. load: 22kg
– Height: 120mm – 1780mm
– Closed size: 61cm
– Tube diameter: 25.8 – 33mm

Compatibility
Cameras, camcorder, tripod heads with 3/8 inch thread

Included
1x SIRUI R-3213X tripod carbon fibre
1x Carbon Center column
1x RX-75A 75mm half ball adapter
3x Stainless steel spikes
1x Transport bag with strap
*Levelling half ball not included
* Video Head not included

Key Features
Load Capacity: 30.9 lb
Maximum Height: 70.3"
Max Height Without Center Column: 60.4"
Minimum Height: 15.4"
Folded Length: 23.2"
Leg Sections: 4
Weight: 7.3 lb
Carbon Fiber Legs with Twist Lock Joints
Geared Center Column with Locking Collar
Carrying Case with Shoulder Strap
The R-4214E Geared Center Column Carbon Fiber Tripod from Sirui is a robust carbon fiber tripod with a maximum height of 70.3", and a load capacity of 30.9 pounds, making it suitable for use with heavy camera setups, telescopes, precision measuring devices, and more. The center column is gear-driven for precise positioning and has a locking collar. The top of the center column features a reversible 3/8"-16 to 1/4"-20 threaded head mounting tip. The base of the center column also features a 3/8"-16 threaded tip for mounting a head in the inverted position.

The carbon fiber legs have independent spread and three locking positions for a variety of heights and to help achieve level on uneven terrain. Each leg has a padded leg cover for improved grip. The tripod legs have a graduated scale in 5cm increments for scenarios that require precise height adjustments. The rubber feet are removable and a set 3x spiked feet are included, so the R-4214E can have traction on any type of surface.

Geared center column with locking collar
Center column crank folds for easy storage
Independent leg spread
Three locking leg angles
Legs feature graduated scales
Padded leg covers for improved grip
Reversible 3/8"-16 to 1/4"-20 head mount
Bubble level
Included 3-spiked foot set

Technical data Softbox
- 16 struts
- Diameter: 101 cm
- Depth: 43.5 cm
- Pack size: Height 65 cm / Diameter: 18 cm
- Weight (with grid and diffuser fabrics): 1800 g

Compatibility
SIRUI C-Series LED Continuous Lights
Flashes or continuous lights with Bowens S-Type bayonet

Scope of delivery
1x SIRUI RGX105 softbox 101cm
1x front diffuser
1x inner diffuser
1x grid
1x softbox bag
*flashgun, continuous light & tripod not included.

- 16 struts
- Diameter: 60 cm
- Depth: 30 cm
- Pack size: Height 42.5 cm / Diameter: 18 cm
- Weight (with grid and diffuser fabrics): 1100 g

Compatibility
SIRUI C-Series LED continuous lights
Flashes or continuous lights with Bowens S-Type bayonet

Scope of delivery
1x SIRUI RGX60 softbox 60cm
1x front diffuser
1x inner diffuser
1x grid
1x softbox bag
*flashgun, continuous light & tripod not included.

Form fitting design
Designed specifically for the Fujifilm X-H2/X-H2s
Lightweight aircraft grade aluminium
Removable top handle
Multiple mounting points for accessories
Arca standard bottom rail
Alternative quick release plate for use on a gimbal or tripod head
Wrist strap
This full cage is specifically designed for the Fujifilm X-H2/X-H2S. It adds a lot of mounting points without getting in the way of the camera’s controls. Cameras are attached to the cage via 2 points for added stability and rubber pads are included to keep the camera free from scratches and damage.

A variety of accessories can be attached to the camera via 1/4-20″ threaded holes, ARRI 3/8″-16 locating holes, cold shoe mounts, NATO rails, quick release plates, etc. Two types of quick release plates are included for quick switching between handheld, tripod, and gimbal modes.​ The ergonomic wrist strap takes a lot of pressure off your hand whether shooting horizontally or vertically, and provides more stability for the user.​ The Cage weighs only 370g (with handle) so even with a lot of accessories attached, the whole setup remains portable for handheld shooting.

Magnetic tools including a flathead screwdriver and an M2 hex key are stored at the bottom. The handle comes with three cold shoe mounts and has an Allen key built into it. Safety pins help lock the handle securely to the cage

Compatibility:

Fujifilm X-H2

Fujifilm X-H2s

Key Features
For Photo, Video & Film Production
Output: 700 Lux at 3.3'
2500–8000K CCT; RGB Mode
Local, DMX, and Bluetooth Control
CRI 97 | TLCI 97
14 Built-In Special Effects
Battery Power / AC Power
Versatile in form and function, the Telescopic RGB Tube Light from SIRUI expands the creative potential of any shoot with its adjustable length and full spectrum of color outputs. The tube light is built to extend from 2 to 4', while the RGB and hue, saturation, and intensity modes allow for precision color selection. The color temperature range spans from 2500K to 8000K with an additional green/magenta adjustment for blending with any ambient light situation. The light also features 14 built-in special effects including police car, broken bulb, and candle.

A companion iOS/Android app allows for full functional control of the light via your phone with Bluetooth from distances up to 49'. Connect and control light groups with the app or with dual 3.5mm DMX interfaces. The light is powered by an internal lithium-ion battery that lasts for up to 2.5 hours on a full charge. The light can also be used while connected to the included charging adapter. A 1/4"-20 thread on the bottom lets you mount the light on an optional mini tripod or other compatible support.