Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 82mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-82D Camera Positioning Bracket from NiSi is a rotating collar that attaches to select DSLR camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-82D is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-82D features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-82D features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 82mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 82mm.

The Wizard W-82D is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
DSLR cameras with lenses less than 82mm in diameter
Not compatible with large profile bodies or cameras using battery grips
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

The Godox Round Head reflector with adapter is easy to attach to the flash thanks to the adjustment screw.

Godox V350

Overview


With advanced functions including high-speed sync, a built-in 2.4 GHz radio system, and a rechargeable lithium-ion battery capable of 500 full power flashes, the compact V350F Flash from Godox is a valuable asset for Fujifilm camera users. With a lightweight design and guide number of 118' at ISO 100 and 105mm, the V350F is useful for both on-camera and off-camera operation. Users can also use it as an optical slave in addition to use as a radio TTL master/slave unit. It is versatile as well, with the ability to tilt from -7 to 90° and rotate 270°. Multiple functions and features built into the unit, includes HSS, stroboscopic flash, 1st and 2nd curtain sync, and a fast recycle time of 0.1 to 1.7 seconds. The flash is compatible with numerous Fujifilm cameras, see features for the list.

Rechargeable Li-Ion Battery
Removable, rechargeable battery delivers up to 500 full power flashes on a full charge, while recycling at a fast 0.1 to 1.7 sec.
XProF Wireless Radio System
An integrated 2.4 GHz XProF radio system is incorporated for wireless triggering with a separately purchased transmitter with a range of 164'. The system supports all of the flash's major functions.
Ample Power
With a guide number of 118' at ISO 100 and 105mm, the V350F will provide ample illumination for most subjects. It also features a zoom head with a range of 24-105mm and a 14mm wide-angle panel for using a variety of different lenses.
Flexible Design
The flash head can be tilted from -7 to 90° and rotated a total of 270° for controlling bounce and where the light falls on the scene.
AF Assist Beam
Autofocus assist beam, with a 2-13.1' range in the center of the frame, enables faster, more accurate focusing under low-light conditions.
Compatible Cameras
Fujifilm: GFX50S, X-Pro2, X-T20, X-T2, X-T1, X-Pro1, X-T10, X-E1, X-A3, X100F, and X100 T (rear-curtain sync and HSS may not be supported depending on your model)