الماركة Sirui
لون أسود
الأجهزة المتوافقة مع كاميرا الفيديو ، الكاميرا ، الهاتف الذكي
ميزة خاصة بالحجم الكامل والتحريك القابل للتعديل وصغير الحجم
مادة ألياف الكربون
وزن السلعة 1.57 كيلوغرام
الحد الأقصى للوزن 17.6 جنيه
أقصى ارتفاع 66.55 بوصة
رأس ثلاثي القوائم نوع رأس الكرة
الطول الأدنى 18.9 بوصة
بنية صلبة - حامل ثلاثي القوائم للكاميرا من ألياف الكربون عالي الجودة ، وبناء لأقصى قدر من الخفة والمتانة. عمود مركزي مع خطاف لتعليق البضائع لزيادة الثبات. الأعلى. سعة التحميل: 17.6 رطل / 8 كجم. يزن ترايبود 3.46 أرطال / 1.57 كجم فقط.
قابلة للتعديل وقابلة للتمديد - أرجل من ألياف الكربون المكونة من 4 أقسام مع أقفال ملتوية سريعة التحرير تسمح لك بضبط ارتفاع العمل من 18.9 "إلى 65.55" في ثوانٍ ، بينما مع ارتفاع مطوي يبلغ 18.9 ". يمكن أن يوفر نظام ضبط زاوية الأرجل ثلاثي المواضع تصويرًا مرنًا لسيناريوهات وظروف التصوير المختلفة.
حامل ثلاثي و Monopod 2 في 1 - حامل ثلاثي مدمج ، تصميم وظيفي يسمح باستخدامه في وضع الحامل ثلاثي القوائم أو وضع monopod أو عصا المشي لجعل التصوير الفوتوغرافي الخاص بك أكثر تنوعًا ، يمكنك تحويله إلى monopod بالحجم الكامل عن طريق ربط العمود الأوسط وقاعدة الحامل ثلاثي القوائم القابلة للإزالة معًا. يسمح عمودها المركزي القابل للانعكاس أيضًا بالتقاط صور منخفضة للغاية وتحكم كبير في الماكرو.
رأس كروي بزاوية 360 درجة وعرض بانورامي - مع اثنين من مقابض التحكم المستقلة ، يمكن أن يدور رأس الكرة المصمم خصيصًا بزاوية 360 درجة مما يتيح لك التقاط الصور في أي زاوية في اتجاهات أفقية ورأسية ، مما يسهل التقاط الصور البانورامية وتصوير الفيديو. لوحة تحرير سريعة مع برغي قياسي 1/4 بوصة للاتصال السريع بالكاميرا ، متوافق مع جميع كاميرات DSLR تقريبًا مثل Canon و Nikon و Sony و Olympus و Fujifilm و Pentax والمزيد.
يسهل حملها - خفيفة الوزن ولكنها متينة ، يمكن قلب أرجل الحامل ثلاثي القوائم المحمولة وطيها للخلف 180 درجة ، مما يوفر الطول إلى حجم تخزين مضغوط 18.9 بوصة ، كما يأتي مع حقيبة محمولة ، يسهل حملها وحزمها للسفر.

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 82mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-82D Camera Positioning Bracket from NiSi is a rotating collar that attaches to select DSLR camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-82D is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-82D features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-82D features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 82mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 82mm.

The Wizard W-82D is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
DSLR cameras with lenses less than 82mm in diameter
Not compatible with large profile bodies or cameras using battery grips
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.