240gms, 20 Sheets, 210X297 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

240gms, 100 Sheets, 210x297 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

240gms, 20 Sheets, 297x420 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

240gms, 20 Sheets, 297x420 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

Printing method
Dye-sublimation thermal transfer (D2T2)

Foot print
0.10 m2

Line-up of consumables*1
Standard Print : 5”×7”, 6”×8”
Sticker Print : 6”×8”

Print size*2
Standard Print : 3.5”×5”,5”×5”, 5”×7”, 4”×6”, 6”×6”, 6”×8”
Sticker Print : 4”×6”, 6”×8”

Surface finish*3
Glossy type, Matte type

Ribbon finish
Yellow, Magenta, Cyan and Overcoat

Printing resolution*4
300×300 dpi (Standard mode),
300×600 dpi (High Quality mode)

Operation for paper exchange
Semi-Auto Loading

Printer life
200,000 prints (Standard 4”×6”)

Number of prints
Standard 3.5”×5”: 460 sheets, 5”×7”: 230 sheets in 1 roll
Standard 4”×6”: 400 sheets, 6”×8”: 200 sheets in 1 roll
Sticker 4”×6”: 400 sheets, 6”×8”: 200 sheets in 1 roll

Print speed*5
Standard 3.5”×5” : approx. 7.6 sec (Glossy type, Standard mode)
Standard 4”×6” : approx. 8.4 sec (Glossy type, Standard mode)
Sticker 4”×6”: approx. 13.0 sec (Glossy type, High Quality mode)

Dimensions (W×D×H)
10.8”×14.4”×6.7” (275 mm×366 mm×170 mm)

Weight
approx. 12 kg (26.4 lb)

Interface
USB 2.0 Type B connector

Power supply
100V-240V 50 / 60 Hz

Driver software*6
Windows 7 / Windows 10 (32 bit / 64 bit)

*1 printer memorizes the consumable type (sticker or standard) which is first loaded into the printer and then the printer accepts only the same type of consumables.
*2 Sticker/Standard can uses 6”×8” ribbon and divide it to 4”×6”×2 prints. Standard can uses 5”×7” ribbon and divide it to 3.5”×5”×2 prints.
*3 Both are available with one media. Sticker media is limited to Glossy type.
*4 Stickers can be printed in High Quality mode only.
*5 Does not including data processing/transferring time and paper initialization/paper feed times. In case of using the function of ribbon rewind.
*6 Windows 7 is only guaranteed to work(not be subject to future version upgrades or quality assurance) because Windows7 is not supported by Microsoft Corporation. Windows 7, Windows 10 are registered trademarks of Microsoft Corporation in the United States and other countries.

Compatible with FUJIFILM ASK-400 printer
High-quality 152mm×203mm (6x8) paper
Ample quantity of 68 sheets
Effortless and reliable printing experience
Ideal size for impactful prints
Introducing the FUJIFILM ASK-400, a powerful media set designed to enhance your printing experience. With the ASK-400 MEDIA SET, you can expect top-notch quality and performance for your photo printing needs. This media set includes 68 sheets of high-quality 152mm×203mm (6x8) paper, allowing you to create stunning prints with ease.

DG68S&DG69I
Digital Processing Kits For FUJIFILM Frontier (590/570/550/500/340/330 And Noritsu 7700)
Packaging size: 25X32X18
Temperature: 42 C
Time: 22 Second
Replenishment Rate: 2X111 m2
Cat Number: 690502
Working solution P1R : 1.3 L P1R + 1.17 L Starter + 10.53 L Water = 13L
Working solution P2RA : 1.3 L P2RA + 1.3 L P2RB + 10.4 L Water = 13L

Key Features
46" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 48" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 46" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.