Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-S Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Nikon and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
SONY:
a1
a7 II
a7 III
a7M II
a7M III
a7R II
a7R III
a7R IV
a7S II
a9
a9 II
a6600
a6400
a6300

NIKON:
Z6 II
Z6
Z7 II
Z7
Zfc
Z5
Z50
D3400

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-SG Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Canon and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera, and features a cut-out slot to accommodate movement of the camera's flip-out LCD screen. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
CANON:
EOS R
EOS R5
EOS R6
EOS M50

SONY:
a7 IV
a7C
a7S III

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 63mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-63 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select Sony mirrorless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-63 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-63 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-63 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 63mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 63mm.

The Wizard W-63 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
a1
a9 II
a9
a7 IV
a7 III
a7 II
a7
a7R V
a7R IV
a7R III
a7R II
a7R
a7S III
a7S II
a7
a6600
a6500
a6400
a6300
a6100
a6000
FX3
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 72mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-73 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select mirroless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-73 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-73 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-73 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 72mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 72mm.

The Wizard W-73 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
Nikon:
Z7 II
Z7
Z6 II
Z6
Z5

FUJIFILM
X-H2S
X-T5
X-T4
X-T3
X-T2
X-H1

Panasonic
S5

Leica
SL 2
SL

Olympus / OM System
EM1
OM1
EM5 III
EM5 II
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Canon PF-10 Print Head Technology that enables the maximum 2400X1200 dpi high resolution
The Canon PF-10 print head high-precision print heads are manufactured by utilizing the latest semiconductor manufacturing technology to provide an integrated nozzle design.

The Canon ink ejection technology achieves size uniformity of 4pl micro fine droplet and droplet placement accuracy. FINE achieves the essential elements for large format printing with high quality such as 2400 x 1200 dpi high-resolution, smoother gradation, and reduction of graininess. At the same time, its high-drive frequency also contributes to high-speed printing.

Compatible with the following printers:

Canon imagePROGRAF PRO-2000
Canon imagePROGRAF PRO-2100
Canon imagePROGRAF PRO-4000
Canon imagePROGRAF PRO-4000S
Canon imagePROGRAF PRO-4100
Canon imagePROGRAF PRO-4100S
Canon imagePROGRAF PRO-6000
Canon imagePROGRAF PRO-6100

The GVM Turtle Base cstand Grip Arm Kit is specially designed for mounting lighting equipment and a variety of light-shaping tools and accessories.

The C-Stand comes with a detachable turtle base that can be removed from the riser section, for easier transportation and allowing you to mount a light to it.

The stand’s base is a unique staggered 3 leg construction with each leg set at a different height to allow the legs to be nested and placed extremely close to one another on a set.

The 3 riser section columns feature a spring-loaded design that can safely protect the light from the damage of impact caused by the riser suddenly dropping down during adjusting height. to make the whole riser height-adjustable from 53.15”/ 1.35 m to 125.98” / 3.2 m.

In order to improve strength, the riser sections and the base is made of durable stainless steel, making it several times stronger than traditional aluminum designs to sustain the heavyweight of sandbags.

The connectors between riser sections and head grips are chrome coated from aluminum in order to prevent damage and maintain longevity.

Key Features
11 lb Load Capacity
23" Sliding Range
Aluminum Alloy Construction
1/4"-20 and 3/8"-16 Screw Holes
Vertical, Horizontal, and 45° Shooting
Non-Slip Feet
Camera Platform Lock
Controller
Lithium-Ion Battery Pack and Charger
Carrying Bag
The 23" Professional Video Aluminum Alloy Motorized Camera Slider from GVM is a lightweight slider designed for video recording and time-lapse photography. It supports loads up to 11 lb and features 1/4"-20 and 3/8"-16 screw holes for use on the floor, on the table, or via a ball head connected to the camera. It supports vertical, horizontal, and 45° shooting. A controller, lithium-ion battery, battery charger, and carrying bag are included.

Designed for wedding/event photography, studio, and film/video recordings
You can attach the tilt head to the dolly, adjust the slide and tilt head for straight horizontal shots, and find the balance quickly with the built-in precision spirit level
Suitable for all high-performance DSLRs, mirrorless, bridge, and video cameras, and other photographic equipment
Total number of photos calculated based on the time
When using time-lapse photography, you can check the remaining number of shots
Conveyor belt
Non-slip feet
Camera platform lock

Key Features
46" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 48" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 46" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
Dual Ball Heads
1/4" Connectors at Each End
Supports up to 8.8 lb.
The GVM Aluminum Alloy Adjustable Magic Arm greatly expands your options when using a camera, smartphone, LED light, monitor, microphone, etc. It features 1/4" bolts on each end and 180° rotation for your gear. The Magic Arm supports equipment up to 8.8 pounds.

Key Features
5600K Color Temperature, 97+ CRI/TLCI
120° Beam Angle, Dims 0-100%
Multi-Voltage Adapter, Quiet Fan Cooling
AC Adapter, Aluminum Construction
Employing a familiar, easy-to-use monolight form factor, the Daylight LED Video Light S300S from GVM is a versatile light source with a daylight color temperature of 5600K to blend seamlessly when shooting outdoors or in situations where daylight-balanced light fixtures are used. The light's high CRI/TLCI rating of 97 is an indicator of advanced accuracy in rendering color. The S300S has beam spread options for selective lighting or wide coverage, and is dimmable from 0 to 100%. You can make adjustments to light intensity using the included wireless remote control or from a console via onboard DMX.

The aluminum-constructed S300S runs on AC voltage using the included multi-voltage adapter, and it has a Bowens-front accessory mount for the reflector and for access to the many modifiers that use this popular mount.

Benefits
300W COB daylight LED lamp head, which is closer to the natural light
Supports DMX console and remote control operation
Supports multiple modes, including Master, DMX, Rotate, and Slave
Quiet fan cooling
CRI/TLCI: 97+
Dims 0-100%
Bowens front accessory mount
Onboard DMX

Color 32"/80cm
Brand GVM Great Video Maker
Compatible Devices Camera, Cellphone
Item Dimensions LxWxH 38 x 24 x 12 inches
Item Weight 10 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
SUPPORT MULTIPLE SHOOTING MODES: Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point. Set A/B Points and Time-Lapse Keyframes: Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images.
1 TO 100% ADJUSTABLE SLIDING SPEED: The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode, In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
WIRELESS IOS/ANDROID APP CONTROL: Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion.
1/4"-20 AND 3/8"-16 TRIPOD MOUNT THREADS: The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. 1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
BELT DRIVEN WITH BATTERY-POWERED MOTOR: The motor is positioned on one end of the slider and features a L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras.

Key Features
For Vlogging, YouTube, Streaming, TikTok
1-Person Shoot to Camera/Phone/Computer
Clip-On Transmitter/Mic + Lav Mic
Clip-On Receiver with Headphone Jack
Automatic Pairing for Easy Operation
3.5mm Cables for Camera & Mobile Device
USB-Rechargeable 4-Hour Batteries
Up to 164' Operating Range
The KKX-WM01 from GVM is a compact wireless microphone system providing hands-free audio for videos on Instagram, YouTube, and TikTok or for live-streaming, vlogging, meetings, interviews, and online classes. It offers a complete, versatile, and simple-to-use solution for recording conversations and speech directly to a mirrorless/DSLR camera or a mobile device with a 3.5mm headphone jack.

The KKX-WM01 consists of a small, lightweight clip-on transmitter with its own built-in microphone along with an included lavalier mic that can be used if you prefer a more discreet mic setup. The lav includes a foam windshield to protect against breath and wind noise. The system also includes a small clip-on receiver that mounts on your camera or mobile device and connects to its 3.5mm input jack. Both a 3.5mm TRS cable, for camera and computer use, and a 3.5mm TRRS cable, for smartphone use, are included.

The system delivers reliable transmission with clear sound at a line-of-sight distance up to 164' (98' with limited obstacles). The receiver features a 3.5mm headphone jack, enabling you to monitor your audio in real time. The built-in rechargeable batteries provide up to 4 hours of operation and recharge via USB Type-C ports. A split USB charging cable is included that allows you to charge both components at the same time.

Clip-On Transmitter with Built-In Mic + Lavalier Mic
The compact transmitter is equipped with both a built-in microphone and a 3.5mm input that accepts its included lavalier microphone.
The transmitter can be clipped to your collar, tie, or pocket without having to wire yourself or your talent, providing a fast, truly wireless setup.
Use the lavalier if you prefer a more discreet look and have time to mic up your talent.
Compact Single-Channel Receiver
The tiny, lightweight receiver features a clip to attach to cameras and mobile devices.
The receiver features a 3.5mm output jack.
3.5mm cables for mobile devices and cameras are included.
Straightforward Menu-Free Operation
The system is easy to use, and the components pair automatically.
The transmitter and the receiver are powered for up to 4 hours via a built-in rechargeable battery.
The components feature LEDs to indicate battery status.
A split USB charging cable is included.
Monitor in Real Time
If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.
2.4 GHz Digital Wireless
To avoid interference from TV and radio waves, the system operates in the 2.4 GHz frequency band—far away from television, radio, and UHF wireless microphone transmissions.
The system offers a line-of-sight operating range up to 164 feet or up to 98 feet when some obstacles are present.
For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.
The system offers a low latency of only 10ms.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 82mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-82D Camera Positioning Bracket from NiSi is a rotating collar that attaches to select DSLR camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-82D is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-82D features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-82D features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 82mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 82mm.

The Wizard W-82D is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
DSLR cameras with lenses less than 82mm in diameter
Not compatible with large profile bodies or cameras using battery grips
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

1 x Speedlight, 1 x Bare Bulb Flash Head
The second generation of this sleek and versatile strobe, the AD200Pro has a series of enhancements over its predecessor:
Dedicated Stable Color Temperature Mode, which improves color consistency to within +/- 100K throughout the entire power range
Expanded nine stop power range, from 1/256 to 1/1, with 1/10th-stop increments
Faster full-power recycle time of 1.8 sec
Inclusion of a USB Type-C port for updating the flash's firmware
Upgraded metal flash holder/umbrella mount for more secure and stable attachment to light stands
Enhanced control panel with recessed design, additional navigation buttons, and a revised On/Off switch