Advanced Kit including ND8, ND16, ND32, ND64 and Enhanced Polarizer for DJI Air 2S
Optical Glass
NiSi Nano Coating
Air Frame and Aircraft Aluminum Construction
High Definition
Low Reflection
Passes startup calibration

Includes True Color ND4/PL, ND8/PL, ND16/PL and True Color PL
For DJI Mavic 3
The ND/PL are Ideal for Cloudy to Bright Conditions
The ND/PL Lengthen the shutter speed by reducing the amount of light entering the camera – it gives a more natural sense of motion when filming
High Definition Optical Glass
NiSi Nano Coating
Air Frame and Aircraft Aluminum Construction
Low Reflection
Increases saturation
The True Color PL Eliminate Reflections and Glare
The True Color PL offer Greater Color and Tonal Saturation reduces Haze in Landscapes
Compatible with DJI Mavic 3 and Mavic 3 Cine. NOT compatible with Mavic 3 Classic.

Includes ND4, ND8, ND16 and True Color PL
For DJI Mavic 3
The NDs are ideal for Cloudy to Bright Conditions
NDs lengthen the shutter speed by reducing the amount of light entering the camera – it gives a more natural sense of motion when filming
The True Color PL Increases Saturation and Eliminates Reflections and Glare
The True Color PL provides Greater Color and Tonal Saturation reduces Haze in Landscapes
High Definition Optical Glass
NiSi Nano Coating
Air Frame and Aircraft Aluminum Construction
Low Reflection
Compatible with DJI Mavic 3 and Mavic 3 Cine. NOT compatible with Mavic 3 Classic.

Professional Kit including ND8/PL, ND16/PL, ND32/PL, ND64/PL and Enhanced Polarizer for DJI Air 2S
Optical Glass
NiSi Nano Coating
Air Frame and Aircraft Aluminum Construction
High Definition
Low Reflection
Passes startup calibration

Starter Kit including ND8, ND16, and Enhanced Polarizer for DJI Air 2S
Optical Glass
NiSi Nano Coating
Air Frame and Aircraft Aluminum Construction
High Definition
Low Reflection
Passes startup calibration

Starter Kit PLUS including ND8/PL, ND16/PL, and Enhanced Polarizer for DJI Air 2S
Optical Glass
NiSi Nano Coating
Air Frame and Aircraft Aluminum Construction
High Definition
Low Reflection
Passes startup calibration

Starter Kit PLUS including ND8/PL, ND16/PL, and Enhanced Polarizer for DJI Air 2S
Optical Glass
NiSi Nano Coating
Air Frame and Aircraft Aluminum Construction
High Definition
Low Reflection
Passes startup calibration

Key Features
For Beginning Landscapes and Seascapes
V7 100mm Filter Holder
True Color Circular Polarizing Filter
1x 100 x 100mm ND Filter
1x 100 x 150mm Graduated ND Filter
Compatible with Wide Angle Lenses
67mm, 72, 77mm, and 82mm Adapter Rings
Air Blower, Dust Brush, & Cleaning Cloth
82mm Lens Cap
Caddy Filter Pouch
This 100mm V7 Starter Kit from NiSi features the V7 100mm Filter Holder, with a capacity of up to three 100mm-wide, 2mm-thick rectangular filters. It includes a true color Circular Polarizing Filter, which is designed to reduce glare and reflections from non-metallic surfaces, increase saturation and vibrancy in the sky and foliage while ensuring true color reproduction is at its best by eliminating the warming effect that many polarizers may create.

This kit contains a neutral density filter, a medium-edge graduated neutral density filter, which can be used individually or together for greater control over shutter speed and aperture settings. Separately available additional filters can be added when desired.

This kit includes adapter rings making it compatible with most lenses, additional adapter rings are available separately. When working with lenses as wide a full-frame equivalent 16mm, the slim aluminum frame of the V7 will not vignette. In addition, an air blower, dust brush, and microfiber cleaning cloth help to keep the filters clean, in studio or on location. The included Caddy Filter Pouch stores the complete kit for storage or transport.

Features the new NiSi V7 Holder
Includes the new True Color CPL and adaptors for 67mm, 72, 77mm and 82mm
The holder allows the use of 3 square filters + 1 circular polarizer
No vignetting at 16mm (Full Frame)
Includes four filters: 100x100mm IR ND64 6 Stop ND, 100x100mm IR ND1000 10 Stop ND, 100x150mm IR GND8 Reverse 3 Stop and 100x150mm IR GND8 Medium 3 Stop
Includes the NiSi Caddy Pouch, Lens Cap, Clever Cleaner, Cleaning Cloth, and Blower
Great value starter kit for getting started with ND filters and landscape photography
The NiSi 100mm V7 Advance Kit is the ultimate kit for landscape and seascape photographers with everything you need to get started. It’s perfect for anyone who wants to create long exposure images and use ND filters/GND filters with multiple lenses up to 82mm with a standard filter thread. The kit includes the most popular adaptor rings (67mm, 72mm, 77mm and 82mm) with others sold separately. The NiSi 100mm V7 Advance Kit represents a great saving compared to buying all the included items separately.

Key Features
11 lb Load Capacity
23" Sliding Range
Aluminum Alloy Construction
1/4"-20 and 3/8"-16 Screw Holes
Vertical, Horizontal, and 45° Shooting
Non-Slip Feet
Camera Platform Lock
Controller
Lithium-Ion Battery Pack and Charger
Carrying Bag
The 23" Professional Video Aluminum Alloy Motorized Camera Slider from GVM is a lightweight slider designed for video recording and time-lapse photography. It supports loads up to 11 lb and features 1/4"-20 and 3/8"-16 screw holes for use on the floor, on the table, or via a ball head connected to the camera. It supports vertical, horizontal, and 45° shooting. A controller, lithium-ion battery, battery charger, and carrying bag are included.

Designed for wedding/event photography, studio, and film/video recordings
You can attach the tilt head to the dolly, adjust the slide and tilt head for straight horizontal shots, and find the balance quickly with the built-in precision spirit level
Suitable for all high-performance DSLRs, mirrorless, bridge, and video cameras, and other photographic equipment
Total number of photos calculated based on the time
When using time-lapse photography, you can check the remaining number of shots
Conveyor belt
Non-slip feet
Camera platform lock

Key Features
46" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 48" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 46" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Key Features
Wireless Programmable Motorized Slider
Robust 31" Portable Travel Slider
Carbon Fiber Rails
Supports up to 5.5 lb
1/4"-20 and 3/8"-16 Tripod Mounting
Hot Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
Integrated Display on Remote Controller
The 31" GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider is a motorized slider you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of slider travel. The slider carriage has a built-in bubble level, so you can check that your setup is level. Built-in feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot-swap for uninterrupted use. The two included NP-F750 type batteries will run the system for approximately 10 hours. The remote features an integrated display and during time-lapse moves can be turned off to save battery power.

Remote Controller
The wireless controller features its own internal battery and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
For Content Creators and Vloggers
Output: 877 Lux at 3.3' (6400K)
2700 to 10,000K; RGB Control
4 x 9.5"; AC/DC Operation
CRI 97
Onboard and Bluetooth Control
Passive Cooling
0 to 100% Dimming, 8 Lighting Effects
Cold Shoe Mounting
Separately Available AC Adapter
The RGB20W RGB On-Camera LED Light from GVM is a compact on-camera variable color temperature light fixture that features cold shoe mounting and includes a tiltable cold shoe bracket. The light fixture features selectable CCT, HSI, and Scene modes. Featuring 162 LEDs, it has a CCT output from 2700 to 10,000K and a CRI of 97. It can produce the RGB spectrum with 360° and 0 to 100% saturation adjustment.

The CCT mode allows you to select your color temperature output with 0 to 100% stepless dimming, allowing you to use the light in a variety of environments from interior to exterior. HSI mode uses the RGB LEDs to provide you a full spectrum color output, so you can adjust the output from 0 to 360° on the RGB scale while adjusting brightness, as well as saturation from 0 to 100%. Scene mode allows you to access eight built-in special effects. A downloadable app allows you to control your fixture from your phone via Bluetooth. Power the light via the built-in L-series battery plate and included battery or using an optional AC power supply.

Operating Modes
RGB Color Mode
Scroll through the RGB color wheel in 1° increments. Dial-in nearly any color in the visible spectrum.
CCT Mode
The traditional correlated color temperature (CCT) mode allows you to accurately adjust your color temperature from 2700 to 10,000K.
Features
Intuitive On-Unit Interface with OLED Display
The built-in OLED screen offers a simple display, while push buttons and a single rotating knob provide local control of the fixture.
GVM LED App
Install the app on your mobile device to remotely control the fixture via Bluetooth to control color temperature, HSI settings, and brightness, as well as on/off and duration. The app is available for both iOS and Android.
Mounting
The fixture features a 1/4"-20 threaded hole on the bottom and includes a tiltable cold shoe bracket that attaches to the rear of the unit by snapping into slots on the back. This allows you to tilt the fixture forward or back as you desire. The tiltable shoe bracket also has a 1/4"-20 threaded hole for mounting on light stands or other supports.
Accessory
A cold shoe is built into the top of the fixture for mounting accessories on the light.
8 Built-In Scene Modes
Police car, candlelight, TV, bad bulb, lightning, party, disco, paparazzi

Color 32"/80cm
Brand GVM Great Video Maker
Compatible Devices Camera, Cellphone
Item Dimensions LxWxH 38 x 24 x 12 inches
Item Weight 10 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
SUPPORT MULTIPLE SHOOTING MODES: Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point. Set A/B Points and Time-Lapse Keyframes: Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images.
1 TO 100% ADJUSTABLE SLIDING SPEED: The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode, In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
WIRELESS IOS/ANDROID APP CONTROL: Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion.
1/4"-20 AND 3/8"-16 TRIPOD MOUNT THREADS: The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. 1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
BELT DRIVEN WITH BATTERY-POWERED MOTOR: The motor is positioned on one end of the slider and features a L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras.

Key Features
Tripod-Mount Mobile Teleprompter
Supports up to 10.5" Tablets & Phones
iOS/Android Prompting App
Remote Control with Speed/Pause Controls
Compatible with Small & Mid-Size Cameras
The GVM Teleprompter TQ-M has a traditional tripod-mount prompter design and supports up to 10.5" tablets and smartphones. It includes an iOS/Android GVM prompting app and comes with a Bluetooth remote control that works with the app.

Although traditional, the design is compact and lightweight, consisting mainly of a slim base with a camera bracket on the rear and tablet holder on the front. A phone holder is included that can be installed instead of the tablet holder to support most smartphones. The colorless beamsplitter glass with multi-layer dielectric coating for light loss prevention is positioned in the middle with a hood to keep light out of your camera's lens. Virtually any small- or mid-sized camera with any lens diameter can be lined up behind the glass. The camera bracket can be rotated to support compact cameras on one side and larger ones on the other.

The camera bracket can also be moved forward and backward to properly line up your camera, and it's easily secured tool-free via a knob on the bottom. The tablet cradle on the front can similarly be adjusted forward and backward to line up different-sized tablets and phones to the beamsplitter glass. And the beamsplitter glass can be tilted forward and backward to your talent's needs to more clearly reflect the text from your mobile app.

The GVM app allows you to enter text and adjust font size, playback speed, and background color. The included remote control lets you adjust the scroll speed as well as start and pause scrolling remotely.

The main bracket features 1/4"-20 and 3/8"-16 threaded holes on the bottom for mounting compatibility with virtually all tripods, and included 1/4"-20 and 3/8"-16 thumbscrews secure your camera on top.

For easier transport, the prompter breaks down and the different components can be packed away more compact.

Key Features
Tripod-mount mobile teleprompter with tablet and smartphone holders; supports up to 10.5" tablets
Designed for small- to mid-sized cameras
iOS/Android GVM prompting app with adjustable font size, playback speed, and background color
Bluetooth remote control with scroll speed and scroll start/stop controls
1/4"-20 and 3/8"-16 tripod-mount threads
1/4"-20 and 3/8"-16 camera thumbscrews
Colorless beamsplitter glass with multi-layer dielectric coating ensuring no light loss
Base: 22 lb load capacity

Key Features
For Vlogging, YouTube, Streaming, TikTok
1-Person Shoot to Camera/Phone/Computer
Clip-On Transmitter/Mic + Lav Mic
Clip-On Receiver with Headphone Jack
Automatic Pairing for Easy Operation
3.5mm Cables for Camera & Mobile Device
USB-Rechargeable 4-Hour Batteries
Up to 164' Operating Range
The KKX-WM01 from GVM is a compact wireless microphone system providing hands-free audio for videos on Instagram, YouTube, and TikTok or for live-streaming, vlogging, meetings, interviews, and online classes. It offers a complete, versatile, and simple-to-use solution for recording conversations and speech directly to a mirrorless/DSLR camera or a mobile device with a 3.5mm headphone jack.

The KKX-WM01 consists of a small, lightweight clip-on transmitter with its own built-in microphone along with an included lavalier mic that can be used if you prefer a more discreet mic setup. The lav includes a foam windshield to protect against breath and wind noise. The system also includes a small clip-on receiver that mounts on your camera or mobile device and connects to its 3.5mm input jack. Both a 3.5mm TRS cable, for camera and computer use, and a 3.5mm TRRS cable, for smartphone use, are included.

The system delivers reliable transmission with clear sound at a line-of-sight distance up to 164' (98' with limited obstacles). The receiver features a 3.5mm headphone jack, enabling you to monitor your audio in real time. The built-in rechargeable batteries provide up to 4 hours of operation and recharge via USB Type-C ports. A split USB charging cable is included that allows you to charge both components at the same time.

Clip-On Transmitter with Built-In Mic + Lavalier Mic
The compact transmitter is equipped with both a built-in microphone and a 3.5mm input that accepts its included lavalier microphone.
The transmitter can be clipped to your collar, tie, or pocket without having to wire yourself or your talent, providing a fast, truly wireless setup.
Use the lavalier if you prefer a more discreet look and have time to mic up your talent.
Compact Single-Channel Receiver
The tiny, lightweight receiver features a clip to attach to cameras and mobile devices.
The receiver features a 3.5mm output jack.
3.5mm cables for mobile devices and cameras are included.
Straightforward Menu-Free Operation
The system is easy to use, and the components pair automatically.
The transmitter and the receiver are powered for up to 4 hours via a built-in rechargeable battery.
The components feature LEDs to indicate battery status.
A split USB charging cable is included.
Monitor in Real Time
If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.
2.4 GHz Digital Wireless
To avoid interference from TV and radio waves, the system operates in the 2.4 GHz frequency band—far away from television, radio, and UHF wireless microphone transmissions.
The system offers a line-of-sight operating range up to 164 feet or up to 98 feet when some obstacles are present.
For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.
The system offers a low latency of only 10ms.