The high-quality Leofoto RH-1L panning clamp with Arca-Swiss QP-70 quick release plate is a quick release clamp with panning capability that can be used as an alternative or replacement for the standard Arca-Swiss quick release clamp on various Leofoto tripod heads.
Leofoto RH-1L panning clamp with QP-70 quick release plate
The high-quality Leofoto RH-1L panning clamp with Arca-Swiss QP-70 quick release plate is a quick release clamp with panning capability that can be used as an alternative or replacement for the standard Arca-Swiss quick release clamp on various Leofoto tripod heads. The RH-1L allows very precise positioning of the camera for critical panorama work, and the dial locks the head in exactly the right place.

Interchangeable panning clamp quick release
The professional Leofoto RH-1L panning clamp is CNC machined from black anodized aircraft aluminum, making this clutch very strong yet lightweight. A standard Leofoto coupling can be easily exchanged for the RH-1L panning clamp by loosening the central Allen screw. The screw hole of the RH-1L is 3/8-inch and therefore universally usable for professional applications. The Leofoto RH-1L weighs only 78 grams without the quick release plate, its diameter is 52mm and its thickness is 18mm. Thanks to the built-in spirit level, you can easily level a tripod head when using the RH-1L.

Quick-action coupling with spirit level
The RH-1L has a screw-lock quick release that allows you to tighten the interchangeable QP-70 plate as much as you like, which is useful if you want to move the camera slightly on the tripod head. The professional, 7cm long and 38mm wide QP-70 Arca-Swiss Quick Release Plate allows you to mount your camera on this plate in no time. The 20mm wide clamps of the RH-1L release plate ensure maximum locking of the QP-70 release plate.

Key Features
Load Capacity: 8.8 lb
Max Height: 13.4"
Min Height: 4.5"
Folded Length: 9.5"
Leg Sections: 1
Weight: 15.2 oz
Removable, Extendable Center Column
Arca-Type Compatible Ball Head
Quick-Release Plate
Doubles as Handheld Pole
The red Sirui 3T-35R Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1004K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1004K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1004K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Ball head included
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. Furthermore, it has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Best quality aluminum in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 2,0kg
- Max. Load capacity: 12kg
- Material: Aluminium

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. load capacity: 20kg - Packing size: 20kg Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1004K tripod/monopod Alu
1x SIRUI K-10X ball head Alu with interchangeable plate
3x metal spikes
1x carrying bag

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1204K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1204K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1204K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Including ball head K-10X
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. It also has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Carbon 8-layer in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 1.68kg
- Max. Load capacity: 12kg
- Material: Carbon

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1204K tripod/monopod carbon
1x SIRUI K-10X ball head aluminium with interchangeable plate
3x metal spikes
1x carrying bag

Brand Sirui
Color Black
Compatible Devices Still Camera and Camcorder
Material Carbon Fiber
Item Weight 1.62 Pounds
Weight Limit 22 Pounds
Model Name AM-223+B-00K
Maximum Height 13.8 Inches
Tripod Head Type Ball Heads
Minimum Height 2.3 Inches
Compact Tripod: Material: carbon fiber; Color: Black; Weight: 1.17lbs (tripod) + 0.45lbs (ball head); Sections: 3; Min Tube: 16mm/0.63"; Max Tube: 22mm/0.87"; Min Height: 58mm/2.3"; Max Height: 350mm/13.8"; Retracted Height: 215mm/8.5"; Max Load( tripod) : 33lbs/15KG; Max Load( ball head) : 22lbs/10KG.
Functional characteristics: easy adjustment: 3-section column legs with twist leg locks enables you to adjust the working height from 2. 3" To 13. 8" Instantly; loosen and remove the rubber feet, and replace them with the stainless steel spikes
Material characteristics: The whole set weights only 1. 62 lbs. , So it is easy to carry everywhere and suitable for shooting insects and plants. Except for its lightweight and portability, there are other characteristics of excellent durability and high temperature resistance; It also have outstanding stability, flexibility and load capacity. Minimum tube Diameter is 0. 63", but it is able to bear heavy photographic equipment's
Excellent process: The mounting screw is interchangeable from 3/8" To 1/4"
What You Get: 1 x SIRUI AM-223 Mini Tripod; 1 x B-00K Ball Head; 3 x Stainless Steel Spikes; 2 x Allen Wrench; 1 x Portable Bag; 6 years warranty and prompt customer service.

Extreme lightness and very high stability combined in the AM2 series tripods
The tripods of the SIRUI AM2 series with their full equipment and compact dimensions are the ideal introduction to professional photography. Here innovative design meets ergonomic functionality. They are always a loyal and reliable companion for the ambitious and professional photographer.

The ideal tripod to have with you at all times: super compact and light but still extremely stable carbon tripod.

The legs are made of 10-ply carbon fibre, which activates three factors:
1. lightness
2. vibration resistance
3. temperature neutrality

The strong ball head also holds DSLR cameras effortlessly.

- Compact tripod with ball head
- Two leg positions for normal or extremely low working height
- Non-slip feet with rubber coating and screw-in stainless steel spikes
- 1/4" accessory connection for flexi arms, microphones etc.
- High quality ball head with quick release lever for extra strong hold
- Safety Lock System to prevent accidental slipping of the camera
- 360° rotation with scale in 10° steps
- Aluminium of best quality

Technical Data Tripod AM-225
- Height: 6 - 119,5cm
- Height (with head): 13,5 - 126,8cm
- Height when folded: 39,5cm
- Height when folded (with head): 46,5cm
- Sections: 5
- Tube diameter: 10-22mm
- Weight: 0,72kg
- Weight (with head): 0,94kg
- Max. Load capacity: 6kg
- Material: 10x Carbon
- Colour: black

Technical data ball head B-00K
- Height: 70mm
- Ball diameter: 29mm
- Base diameter: 41mm
- Weight: 0,21kg
- Max. Max. load: 10kg
- Material: aluminium
- Colour: black

Scope of delivery
1x SIRUI AM-225 tripod Carbon
1x SIRUI B-00K ball head aluminium
1x SIRUI TY-C10 quick release plate aluminium
3x stainless steel spikes
1x snap hook
1x transport bag
*Camera not included

Load Capacity: 12kg
Ultra low profile design
Leg Sections: 4
Weight: 1.4kgs
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-254 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.4kg
Max. load: 12kg
Minimum height: 145mm
Maximum height: 1270mm
Closed size: 525mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-254 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Load Capacity: 15kg
Ultra low profile design
Leg Sections: 4
Weight: 1.6kg
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-284 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.6kg
Max. load: 15kg
Minimum height: 150mm
Maximum height: 1270mm
Closed size: 530mm
Leg diameter 29.4mm – 18.6mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-284 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Key Features
Curves Inwards and Outwards
Combine Lights for Unique Shapes
500 Lux at 3.3'
360° Full RGB Color at TCLI 98/CRI 97
Color Temperature Range: 2700 to 8500K
16 Built-In Special Effects
Wireless Bluetooth Control via App
AC Power or Optional NP-F970 Battery
Unlock advanced and unique lighting setups in the studio or on location with the Bendable RGB LED Light from SIRUI. This strip light has eight adjustable hinge joints that can illuminate a subject from multiple angles. The ends of the light have an interlocking, quick release connection point for lining multiple units in a series to create a variety of different shapes. Expand the creative possibilities further with multiple color selection modes, a broad color temperature range, and color accuracy ratings of CRI 96 and TLCI 98. Sixteen special effect modes turn the light's color versatility into scene lighting for video work.

An optional connector allows two lights to be stacked in parallel on a single light stand. The unit can be powered with the included adapter or via an optional NP-F970 rechargeable battery. Control the unit locally with the buttons on the LED display or wirelessly from your phone over Bluetooth with a downloadable app.

Key Features
Two Lights with Stand Connector
Curves Inwards and Outwards
Combine Lights for Unique Shapes
500 Lux at 3.3'
360° Full RGB Color at TCLI 98/CRI 97
Color Temperature Range: 2700 to 8500K
16 Built-In Special Effects
Wireless Bluetooth Control via App
AC Power or Optional NP-F970 Battery
Unlock advanced and unique lighting setups in the studio or on location with this Bendable RGB LED 2-Light Kit from SIRUI. Each strip light has eight adjustable hinge joints that can illuminate a subject from multiple angles. The ends of the lights feature an interlocking, quick release connection point for lining multiple units in a series to create a variety of different lighting shapes. Expand the creative possibilities further with multiple color selection modes, a broad color temperature range, and color accuracy ratings of CRI 96 and TLCI 98. Sixteen special effect modes turn the light's color versatility into scenes for video work.

This kit comes with a connector that allows you to stack the two lights in parallel on a single light stand. The unit can be powered with the included adapter or by an optional NP-F970 rechargeable battery. Control the lights locally using the buttons on the LED display or wirelessly from your phone over Bluetooth with a downloadable app.

Max Height 2.8m/9.2ft; Buffer Spring; Reliable & Durable

Buffer Spring
Gently descend to protect the light

Reliable & Durable
The light stand is made of stainless steel and aluminum alloy to be reliable and durable.

Universal Standard 1/4"-20 Screw
Buffer Spring
Reliable & Durable


Material: Aluminum Alloy and Stainless Steel
Load Capacity: Max: 22 lbs (10kg)
Threaded Hole: 1/4-20"
Max Height: 9.2' (2.8m)
Folded Height: 38.6" (980mm)
Spreader Height: 27.8" (705mm)
Weight: 3.75 lbs (1.7kg)

Key Features
Load Capacity: 18 lb
Max Height: 55"
Min Height: 5"
Folded Length: 16.5"
Leg Sections: 4
Weight: 3.6 lb
E-10 Ball Head with TY-50E QR Plate
Reverse-Folding Legs
Short Center Column Included
Custom Padded Case & Shoulder Strap
The ET-1004 Aluminum Tripod with E-10 Ball Head from Sirui is a 4-section aluminum tripod with an included ball head and quick release plate.

With the center column extended, the tripod's maximum height is 55" The tripod weighs 3.6 lb and can support up to 18 lb. An included short center column allows for changeover to shoot macro or from low angles. Also, the center column can be inverted to shoot from under the tripod.

The 4-section legs feature flip locks for easy adjustment and each leg can be independently placed at three position angles and automatically lock in place for secure shooting on uneven ground. The legs on the ET-1004 fold up 180º for compact storage and transport; its folded length is just 16.5". The tripod's rugged spider is made from forged aluminum alloy and the legs are made from economical aluminum alloy for stability, performance and longevity.

The E-10 ball head and a quick-release plate are supplied with the ET-1004 tripod . The ball head provides separate adjustment knobs for panning and locking, the locking knob is metal with a solid grip and wear-resistant surface. The E-10 ball head's locking mechanism can support up to 40 lb and is built to for smooth, vibration-free movement. A bubble-level is supplied for fast and accurate alignment.

Key Features
For Photo, Video & Film Production
Output: 700 Lux at 3.3'
2500–8000K CCT; RGB Mode
Local, DMX, and Bluetooth Control
CRI 97 | TLCI 97
14 Built-In Special Effects
Battery Power / AC Power
Versatile in form and function, the Telescopic RGB Tube Light from SIRUI expands the creative potential of any shoot with its adjustable length and full spectrum of color outputs. The tube light is built to extend from 2 to 4', while the RGB and hue, saturation, and intensity modes allow for precision color selection. The color temperature range spans from 2500K to 8000K with an additional green/magenta adjustment for blending with any ambient light situation. The light also features 14 built-in special effects including police car, broken bulb, and candle.

A companion iOS/Android app allows for full functional control of the light via your phone with Bluetooth from distances up to 49'. Connect and control light groups with the app or with dual 3.5mm DMX interfaces. The light is powered by an internal lithium-ion battery that lasts for up to 2.5 hours on a full charge. The light can also be used while connected to the included charging adapter. A 1/4"-20 thread on the bottom lets you mount the light on an optional mini tripod or other compatible support.

Key Features
18 to 29" Length Adjustment
360° Full Color RGB Mode
14 Built-In Special Effects
Music Mode: Reacts to Music or Sound
2500-8000K Color Temperature / 97 CRI
iOS/Android App & 2.4GHz Remote Control
Mounting Ring & 1/4"-20 Mounting Thread
Mini Tripod Included
Memory Function for Saving Settings
Integrated 2-Hour Battery
Not only a tube light but a telescopically adjustable one, the T60 Telescopic RGB LED Video Light from Sirui is highly portable and easily suitable for a wide range of applications. It telescopically adjusts from 18 to 29" in length. A 1/4"-20 thread on the bottom lets you mount the light on an included mini tripod or various other supports. On the opposite end is a pull-out ring for hanging the light on a hook or something similar. You can also use the light handheld.

Three operating modes and a companion iOS/Android app together allow you to simulate numerous lighting effects. Using the app, you can control all functions of the light from a distance. A 2.4GHz wireless remote control is also included. It comes attached to the grip handle of the light and is removable and works from up to 49' away. You can use it to control multiple units by assigning them to specified groups.

The color temperature is adjustable from a warm 2500K to a cool white 8000K, and color accuracy is up to 97 CRI/TLCI. The three operating modes are 360° full color RGB mode, effects mode, and music mode. Color mode lets you select any color from the color spectrum and adjust saturation and brightness. Effects mode offers 14 built-in special effects, such as flash, laser, candle, and fireworks. In music mode, the light reacts to music or sound, useful for music videos and other purposes. There's a pickup hole on the bottom of the light for this purpose.

The light features a memory function where you can save up to 20 dialed-in settings so that you can access them directly the next time around. The T60 is powered by an internal lithium-ion battery that runs up to two hours at full power. A charging adapter is included for recharging it in approximately 1.5 hours.

The T60 uses SMD RGB LEDs. Also, it's designed to ensure consistent light output with no flicker.

Key Features
For Film and Video Production
Output: 7000 Lux at 3.3' (5600K)
5600K CCT
AC and Optional Battery Power
Onboard, DMX, and Bluetooth App Control
CRI 96 | TLCI 98
Fan Cooled
Bowens S-Mount Compatibility
8 Built-In Lighting Effects
Compact and Lightweight Design
A compact and lightweight fixture for film and video production, this Sirui 150W Daylight LED Monolight features an impressively high output of 7000 lux at 3.3' and a daylight-balanced color temperature of 5600K. An independent control box lets you quickly change settings without touching the fixture itself, and the light can also be wirelessly controlled via the Sirui Light app. Additionally, for more advanced control methods, the control box is equipped with a 5-pin DMX input and output.

The light is designed with a Bowens S-mount for use with the included reflector and a wide range of other optional light modifiers, and eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding. For mounting on a light stand, a flexible yoke with two locking knobs let you rotate the fixture 360°, and a convenient hand strap is also included for on-the-fly and handheld use. Designed for indoor and outdoor setups, the light is equipped with an AC adapter and power cord for continuous use with mains power, and for location shoots the light can be conveniently powered by one V-mount battery.

Compact and lightweight design featuring consistent light output and excellent color reproduction.
Crafted from high-quality aluminum alloy for use in tough and demanding environments.
Independent control box to quickly change settings without touching the fixture itself.
Compatible with Sirui Light app for wireless operation.
DMX input and output for use with light boards.
Eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding.
Built-in fan to quietly dissipate heat.
Universally recognized Bowens S-mount compatible with a wide range of separately purchased light modifiers.
Compatible with optional V-mount batteries.

150w Bi-colour Monolight
Lightweight compact design
RCM approved for use in Australia
2800-7000K
12 lighting effects
Bluetooth app and unit controllable
6100LUX @1m
Dual power options
96 CRI, 98 TLCI
Introducing the Sirui C150B Bi-Colour LED Monolight.

Portable, compact, and high-powered the C150B is perfect for a constant light source for photography or video.

The C150B has an adjustable temperature from 2800k – 7000k, which is perfect for matching ambient light. An ultra-quiet operation matches perfectly with video use, where any ambient noise needs to be kept at a minimum. The C150B can be controlled via the SIRUI light app via Bluetooth or directly on the light controller itself. Twelve modes can be implemented to achieve different lighting situations or effects.

The Bowens mount is compatible with a vast range of diffusers or modifiers on the market, including Sirui’s range of soft boxes and diffusers. The U shaped bracket is perfect for quick and easy direction change and is easy to attach to a light stand.

Key Features
For Film and Video Production
Output: 12,500 Lux at 3.3' (5600K)
5600K CCT
AC and Optional Battery Power
Onboard, DMX, and Bluetooth App Control
CRI 96 | TLCI 98
Fan Cooled
Bowens S-Mount Compatibility
8 Built-In Lighting Effects
Compact and Lightweight Design
A compact and lightweight fixture for film and video production, this Sirui 300W Daylight LED Monolight features an impressively high output of 12,500 lux at 3.3' and a daylight-balanced color temperature of 5600K. An independent control box lets you quickly change settings without touching the fixture itself, and the light can also be wirelessly controlled via the Sirui Light app. Additionally, for more advanced control methods, the control box is equipped with a 5-pin DMX input and output.

The light is designed with a Bowens S-mount for use with the included reflector and a wide range of other optional light modifiers, and eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding. For mounting on a light stand, a flexible yoke with two locking knobs let you rotate the fixture 360°, and a convenient hand strap is also included for on-the-fly and handheld use. Designed for indoor and outdoor setups, the light is equipped with an AC adapter and power cord for continuous use with mains power, and for location shoots the light can be conveniently powered by two V-mount batteries.

Compact and lightweight design featuring consistent light output and excellent color reproduction.
Crafted from high-quality aluminum alloy for use in tough and demanding environments.
Independent control box to quickly change settings without touching the fixture itself.
Compatible with Sirui Light app for wireless operation.
DMX input and output for use with light boards.
Eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding.
Built-in fan to quietly dissipate heat.
Universally recognized Bowens S-mount compatible with a wide range of separately purchased light modifiers.
Compatible with optional V-mount batteries.

Key Features
For Film and Video Production
Output: 11,500 Lux at 3.3' (5600K)
2800-7000K CCT
AC and Optional Battery Power
Onboard, DMX, and Bluetooth App Control
CRI 96 | TLCI 98
Fan Cooled
Bowens S-Mount Compatibility
12 Built-In Lighting Effects
Compact and Lightweight Design
A compact and lightweight fixture for film and video production, this Sirui 300W Bi-Color LED Monolight features an impressively high output of 11,500 lux at 3.3' and a color temperature range of 2800-7000K. An independent control box lets you quickly change settings without touching the fixture itself, and the light can also be wirelessly controlled via the Sirui Light app. Additionally, for more advanced control methods, the control box is equipped with a 5-pin DMX input and output.

The light is designed with a Bowens S-mount for use with the included reflector and a wide range of other optional light modifiers, and twelve built-in special lighting effects including lightning, flash, broken bulb, candle, fire, fireworks, CCT loop, impulse, welding, TV, blast, and SOS. For mounting on a light stand, a flexible yoke with two locking knobs let you rotate the fixture 360°, and a convenient hand strap is also included for on-the-fly and handheld use. Designed for indoor and outdoor setups, the light is equipped with an AC adapter and power cord for continuous use with mains power, and for location shoots the light can be conveniently powered by two V-mount batteries.

Compact and lightweight design featuring consistent light output and excellent color reproduction.
Crafted from high-quality aluminum alloy for use in tough and demanding environments.
Independent control box to quickly change settings without touching the fixture itself.
Compatible with Sirui Light app for wireless operation.
DMX input and output for use with light boards.
Twelve built-in special lighting effects including lightning, flash, broken bulb, candle, fire, fireworks, CCT loop, impulse, welding, TV, blast, and SOS..
Built-in fan to quietly dissipate heat.
Universally recognized Bowens S-mount compatible with a wide range of separately purchased light modifiers.
Compatible with optional V-mount batteries.

Introducing the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head: Elevate Your Photography Game with Unmatched Precision and Durability

The Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head is a masterpiece of engineering, designed to exceed the expectations of professional photographers and outdoor enthusiasts. This remarkable tripod and ball head combo offers unparalleled stability, exceptional waterproof capabilities, and precise control, allowing you to capture awe-inspiring images in any challenging environment.

Unrivaled Stability and Durability:

Crafted from premium carbon fiber material, the Sirui ST-124 tripod combines strength with lightweight construction, making it easy to carry without compromising stability. Its robust design allows for a maximum load capacity of up to 12 kilograms, ensuring that your camera and lenses remain secure and steady, even when shooting with heavy equipment. Say goodbye to shaky shots and welcome crystal-clear images that truly stand out.

Weatherproof Performance:

With the Sirui ST-124 tripod, adverse weather conditions are no longer an obstacle. This tripod is not just resistant to dust and dirt but waterproof, making it perfect for photographers who are constantly pushing their boundaries. Whether you’re shooting in the rain, near water bodies, or even in sandy environments, rest assured that your gear will remain safe and protected, allowing you to focus on capturing breathtaking moments.

ST-10X Ball Head for Precise Control:

The included ST-10X Ball Head is a testament to Sirui’s commitment to precision and excellence. With separate knobs for panning, friction control, and locking, you have full control over the movement of your camera. The Arca-Swiss compatible quick-release plate enables seamless attachment and detachment, ensuring swift camera adjustments on the go. The ST-10X Ball Head allows you to capture the perfect composition with ease, empowering your creative vision.the dual panning clamp and base allow for easy panorama shooting.

Versatility and Adaptability:

The Sirui ST-124 tripod is designed to adapt to any shooting scenario. Its four-section legs can be independently adjusted to three different angles, allowing for stable positioning on uneven terrain. The tripod also features a reversible center column, enabling you to achieve low-angle shots or even use it for macro photography. With its versatility, this tripod opens up endless possibilities for your creative exploration.

Ease of Use and Portability:

Setting up the Sirui ST-124 tripod is a breeze, thanks to its user-friendly design and quick-lock leg system. The twist locks ensure fast and secure leg extension and retraction, allowing you to focus on capturing the perfect shot. When it’s time to move or pack up, the tripod collapses to a compact size for easy transportation. Weighing just 1.6 kilograms, the ST-124 is incredibly lightweight, making it a trusted companion for photographers on the move.

Embrace the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head and elevate your photography game to new heights. With its unbeatable stability, exceptional weatherproof performance, precise control, and adaptability, this tripod is a must-have tool for professionals and adventurers alike. Don’t let challenging environments hinder your creativity—unleash your vision with confidence using the Sirui ST-124.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.6kg
– Max. load: 12kg
– Tripod height: 450mm – 1710mm
– Closed size: 570mm

Included
1x SIRUI ST-124 waterproof tripod carbon fibre
1x ST-10X Ball head with QR plate
1x Transport bag with strap



The Sirui ST-10X Ball Head are designed and built to the highest standards. The ST-10X ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 38mm
– Weight: 0.43kg
– Height: 85mm
– Load Capacity: 20kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Perfect Travel Tripod
Reverse-Folding Legs
Removable Center Column for Low-Angles
Arca-Type Compatible QR Plate
Includes Soft Case and Tools
Weighs only 1kg
The Sirui Traveler 5A Aluminium Tripod with 3T-35 Ball Head – small and compact, yet extremely stable.

This high-quality travel tripod from SIRUI offer secure support for your compact or system camera despite its compact design. It is easy to handle in any situation and can be packed into any bag. The legs can be folded up by 180° meaning that the tripod can be collapsed to a height of just 33cm. Each leg is made of 5 sections with 4 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces. Cold-weather grips are a SIRUI standard offering control in cold weather environments. The Traveler 5 Series features a removable centre column. The head can also be mounted directly onto the tripod shoulder, increasing stability. For additional stability, there is a small keyring with a carabiner underneath the tripod shoulders so you can mount additional weight.

Tripod specifications (Including Head)
• Material: Aluminium
• Extendible and removable centre column
• Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
• Legs fold up by 180°
• Sealed twist locks for secure support
• Carabiner for stabilising and cold weather grips
• Max. load: 4kg
• Height range – 15.5cm – 138cm
• Closed size: 33cm
• Tube diameter: 10 – 22mm
• Weight: 1kg
– Colour: black

Ball head specifications
– Material: Aluminium
– 360° panorama function – infinitely variable friction control
– Rubber release plate – size: 30x38mm
– Release plate with 1/4″ stainless steel screw – head with 3/8″ thread
– Safety Lock System – prevents the plate from accidentally slipping
– Vertical slot
– Max. load: 4kg
– Height: 70mm
– Base plate: ø37mm
– Weight: 172g (including plate)
– Colour: black

Included
1x SIRUI Traveler 5A tripod aluminium black
1x SIRUI 3T-35K ball head black
1x SIRUI TY-C10 release plate black
1x Transport case