Key Features
Wireless Programmable Motorized Slider
Robust 31" Portable Travel Slider
Carbon Fiber Rails
Supports up to 5.5 lb
1/4"-20 and 3/8"-16 Tripod Mounting
Hot Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
Integrated Display on Remote Controller
The 31" GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider is a motorized slider you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of slider travel. The slider carriage has a built-in bubble level, so you can check that your setup is level. Built-in feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot-swap for uninterrupted use. The two included NP-F750 type batteries will run the system for approximately 10 hours. The remote features an integrated display and during time-lapse moves can be turned off to save battery power.

Remote Controller
The wireless controller features its own internal battery and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest

Powerful RGB Led Video Light: 2022 Upgraded RGB video lights, 65W high power light, Consist with 960pcs Highlight LED beads, lumen is 25000lux/0.5m, 10000lux/1m.comes with two output ways. The first mode is that you can adjust the color temperature between 3200K-5600K. The second mode is that you can adjust the hue output (0°~360°) and color saturation of red, green, and blue from 0% to 100%
APP Bluetooth Control System: You can set the channel, adjust the color temperature/brightness/HSI parameters/Scenes through the button and knob on the panel with clear LCD screen or by downloading GVM app in such as Apple Store/Google Play, etc through your smart mobile device for easy operation.
Built-in Scenes Modes: This RGB Video Light supports 8 kinds of special lighting scenes to enrich your shooting environment, including TV, Candle, Cop Car, Lightning, Paparazzi, Disco, Party, Bad bulb.
Master & Slave Control Mode: GVM 1300D video light support master and slave control mode. You can set one light as the master mode and the other lights as slave mode, which is convenient to control all lights with the master one (Master mode need to switch the Bluetooth mode if you would like to use the app to control all light)
It consists of 960 LED Lamp beads: This video light is adopted by the American Chip and has a life of more than 100000 hours. It's designed with aerospace aluminum alloy Casing to effectively help the LED light to better dissipate heat. LED Panel light can use two modes to power, you can use an AC adapter and Sony F750/970 battery (not included) to supply power outdoor or indoor

1/4″ and 3/8″ Screw. Motorized camera sliders with 1/4 “and 3/8” tapped holes can be mounted on a tripod or light stand to support multiple angles.

It can also be used on feet and height-adjustable floors.

Multi-target Switching

With 2 axes (horizontal, tilt, and rotation), you can easily switch shooting targets, and also make a smooth transition between these targets as the slider moves.

Multi-angle Shooting with High Load Capacity

The camera slider is compatible with light stands or camera tripods for shooting at different angles.

Moreover, it has a load capacity of up to 11 pounds, which makes horizontal and vertical shooting smoother.

Powered by AC adapter or NP F750 battery (not included). In time-lapse mode, the battery may last for nearly 10 hours
GVM 2D 2-Axis Wireless Carbon Fiber Motorized Slider

1x Motorized Slider

1 x Controller

x Battery

2 x Battery Charger

1 x Controller Connection Line

6 x Shutter Link

1 x Shutter Extension Line

1 x Carrying Bag

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
The 32″ ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31″ of travel.

The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.

You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:

DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the move

Remote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting

The slider can traverse the 31″ sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation

Led video lighting kit with app control: LED Panel lighting kit, app control model, Color temperature is between 2300k-6800k and High brightness is between 10%-100%, Has a new addition of digital display screen, accurately displaying the parameters.
Adjustable light board: The Photography Lighting Kit is distributed and with an adjustable soft board, its very a helpful Studio Lighting Kit for portrait and video.
Ac/ DC power options: wireless operation with AC adapter (supplied) or Sony NP-F550 np-f970 Li-ion battery (not included).
Metal shell and u-shaped frame: featured with the durable aluminum alloy shell, The Lighting Kit has an excellent heat dissipation effect. With an adjustable U-shaped bracket, the Panel Lighting Kit can be put on the light stand or on the ground.
All GVM Photography Lighting Kit includes one year service. Package Includes 2XLED video lights, 2x AC adapters, 2 x bracket-white diffusers, 2 x Power cables, 2 x light stands, and a handbag.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Features
CCT Colour: 3200 to 5600K, Length: 36.8"
Adjustable RGB/Bi-Colour Settings, CRI:97
APP Control, Optional Battery
This GVM RGB LED Tube Wand was created to illuminate the scene when you shoot live broadcasts, outdoor or studio photography, and videos for YouTube. The wand combines an extended continuous variable colour temperature range with a multi-hued RGB colour palette.

The light stick can be tuned to meet ambient conditions, with variable colour from 3200 to 5600K, and is dimmable from 0 to 100%. The RGB range allows you to choose from a myriad of colours and hues. The wand has a high CRI rating of 97 to assure accurate colour reproduction. It has an App intelligent control system which can be adjusted by your mobile device. The battery option makes it fun and convenient to use.

Specifications
Light Fixture
Photometrics 84 fc / 903.8 Lux at 3.28' / 1 m
Colour Temperature 3200 to 5600K
Colour Accuracy Standard CRI 97
Dimming Yes
Housing Material ABS Plastic, Aluminium
Fixture Weight 6.94 lb / 3.15 kg
Mounting
Yoke Mount None
Remote Operation
Remote Control Type Bluetooth
Power
AC Input Power 100 VAC, 50 / 60 Hz
DC Input Power 32 VDC at 7 A
Power Source AC Adapter, External Battery

Key Features
For Photo & Video Enthusiasts
Output: 900 Lux at 3.3' for Each Light
3200-5600K CCT; RGB Mode
Onboard & App Control
CRI 97
8 Preset Special Effects
Built-In Rechargeable Battery; AC Power
Double Lamp Bracket for Mounting
Aluminum and Plastic Construction
Includes Power Adapters, Bracket & Bag
Use this GVM BD100 2-Light Kit to illuminate the scene when you shoot live broadcasts, outdoor or studio photography, and videos for YouTube. Each 3' wand outputs up to 900 lux at 3.3' and combines an extended continuous variable color temperature range with a multi-hued RGB color palette. They can be tuned to meet ambient conditions, have variable color from 3200 to 5600K, and are dimmable from 0 to 100%. The RGB range allows you to choose from a myriad of colors and hues while the high CRI rating of 97 assures accurate color reproduction.

The BD100 can be controlled onboard via an easy-to-use OLED display with control via the panel control or an app with your mobile device. You can effortlessly adjust and customize the light's settings to achieve your desired parameters. The integrated battery can be recharged with the included power supply. This kit includes a double lamp bracket for mounting as well as a bag for convenient storage and transportation of the entire kit.

Special Effects
The BD100 features eight built-in special effects to choose from including lightning, cop car, candlelight, TV, bad bulb, party, disco, and paparazzi.

Key Features
Two BD-60 Wands, Cords, Power Adapters
Double Lamp Bracket, Carry Case
For Photo and Video Enthusiasts
Output: 700 Lux at 3.3'
3200-5600K CCT, RGB Mode
Bluetooth and App Remote Control
CRI 97
8 Special Effects
Rechargeable Battery
OLED Display
This BD-60 RGB LED 2-Light Wand Kit with Bracket from GVM is perfect for when you have mastered a single wand, and now want two. Included are two 21.8" RGB LED wands, each with a power adapter and cord. The double bracket allows you to use the lights in tandem.

Key Features
Dual-Handgrip Light with Phone Holder
For Vlogging and Tripod-Mount Setups
Vertical and Horizontal Attachment
Smartphone Photo Trigger on Handgrip
Powered by Included L-Series Battery
5600K Color Temperature with 97 CRI
0 to 99% Dimming
White and Orange Filters Included
2 x Cold Shoe Mounts; 1/4"-20 Threads
Optional DC Adapter Supported
The LT-10S Smartphone Video Camera Rig Light from GVM features a dual-handgrip design and includes an adjustable smartphone holder you can attach in the center. Mount virtually any smartphone in-between the two LED panels, which deliver either warm or cool white light thanks to two sets of filters. An included L-series battery neatly installs on the back and powers the light and a photo trigger on one of the handgrips.

Key Features
7.4V, 6600mAh Capacity L-Series Battery
Pocket Charger with Fold-Out AC Plug
100-240V Worldwide Power Input
LED Status Indicator
GVM's NP-F970 6600mAh Lithium-Ion Battery with Travel Charger provides a portable solution for powering various devices that use an L-series battery. The 7.4V battery offers a 6600mAh capacity, and the compact pocket charger features a fold-out 2-prong AC plug. The charger supports 100-240V worldwide power input and can be used internationally using the proper plug adapter, sold separately. An LED indicator on the charger confirms whether the battery is still charging or already fully charged.

compact and portable power solution for devices powered by L-series and v mount battery.The included V-mount adapter is a slim V-mount plate that accepts both included 6600mAh NP-F970 batteries or any other L-series batteries. The plate can be mounted on V-mount-powered devices such as cameras and lights to deliver power from L-series batteries. When the plate is used for gear such as certain cameras, two L-series batteries are required to be used because such high-powered devices require more than the 7.2V provided by a singe L-series battery.. The dual charger charges two batteries simultaneously and has an LCD showing the charge status of each battery. Designed with automatic current control, the charger also provides overcharge, over-discharge, over-temperature, overcurrent, overvoltage, and short-circuit protection. The charger is USB-powered and can be connected to a standard USB charger, a computer, or a portable USB power bank, and a USB charging cable is included.

Key Features
For Content Creators and Vloggers
Output: 877 Lux at 3.3' (6400K)
2700 to 10,000K; RGB Control
4 x 9.5"; AC/DC Operation
CRI 97
Onboard and Bluetooth Control
Passive Cooling
0 to 100% Dimming, 8 Lighting Effects
Cold Shoe Mounting
Separately Available AC Adapter
The RGB20W RGB On-Camera LED Light from GVM is a compact on-camera variable color temperature light fixture that features cold shoe mounting and includes a tiltable cold shoe bracket. The light fixture features selectable CCT, HSI, and Scene modes. Featuring 162 LEDs, it has a CCT output from 2700 to 10,000K and a CRI of 97. It can produce the RGB spectrum with 360° and 0 to 100% saturation adjustment.

The CCT mode allows you to select your color temperature output with 0 to 100% stepless dimming, allowing you to use the light in a variety of environments from interior to exterior. HSI mode uses the RGB LEDs to provide you a full spectrum color output, so you can adjust the output from 0 to 360° on the RGB scale while adjusting brightness, as well as saturation from 0 to 100%. Scene mode allows you to access eight built-in special effects. A downloadable app allows you to control your fixture from your phone via Bluetooth. Power the light via the built-in L-series battery plate and included battery or using an optional AC power supply.

Operating Modes
RGB Color Mode
Scroll through the RGB color wheel in 1° increments. Dial-in nearly any color in the visible spectrum.
CCT Mode
The traditional correlated color temperature (CCT) mode allows you to accurately adjust your color temperature from 2700 to 10,000K.
Features
Intuitive On-Unit Interface with OLED Display
The built-in OLED screen offers a simple display, while push buttons and a single rotating knob provide local control of the fixture.
GVM LED App
Install the app on your mobile device to remotely control the fixture via Bluetooth to control color temperature, HSI settings, and brightness, as well as on/off and duration. The app is available for both iOS and Android.
Mounting
The fixture features a 1/4"-20 threaded hole on the bottom and includes a tiltable cold shoe bracket that attaches to the rear of the unit by snapping into slots on the back. This allows you to tilt the fixture forward or back as you desire. The tiltable shoe bracket also has a 1/4"-20 threaded hole for mounting on light stands or other supports.
Accessory
A cold shoe is built into the top of the fixture for mounting accessories on the light.
8 Built-In Scene Modes
Police car, candlelight, TV, bad bulb, lightning, party, disco, paparazzi

Flexibility is key to the RGB LED Bi-Color Video Light Wand from GVM. The light has variable color temperature from 3200 to 5600K to blend in seamlessly with ambient light conditions, match other fixtures, or express creative effects. It has an RGB mode that enables its red, green, and blue LEDs to select from 360 colors with hue control that produces a myriad of color combinations. Light intensity is variable as well from 0 to 100%. The tube is ready for worldwide use via the included NP-F battery. A separately-purchased AC adapter is available. The light comes with a carrying case for storage and transport.

Color 32"/80cm
Brand GVM Great Video Maker
Compatible Devices Camera, Cellphone
Item Dimensions LxWxH 38 x 24 x 12 inches
Item Weight 10 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
SUPPORT MULTIPLE SHOOTING MODES: Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point. Set A/B Points and Time-Lapse Keyframes: Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images.
1 TO 100% ADJUSTABLE SLIDING SPEED: The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode, In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
WIRELESS IOS/ANDROID APP CONTROL: Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion.
1/4"-20 AND 3/8"-16 TRIPOD MOUNT THREADS: The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. 1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
BELT DRIVEN WITH BATTERY-POWERED MOTOR: The motor is positioned on one end of the slider and features a L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras.

Key Features
Color Temperature: 5600K Daylight
CRI: ≥97
Dimmable
Lithium-Ion Battery Powered
The LED Video Light Wand TD-JY258 from GVM is a lightweight LED wand with a bright, 15W output. The 5600K daylight wand features a high CRI rating of ≥97, so it will render colors and skin tones with very high accuracy when shooting either still or video content. The TD-JY258 will operate for approximately two hours at full power with a fully charged battery. Light output can be dimmed, and also softened using the included white diffuser panel. Also, more pleasing skin tones may be created using the included warm diffuser. The TD-JY258 can be handheld, or mounted to a stand or clamp using the integrated 1/4"-20 receiver in the base of the handle.

High-efficiency LED bulbs
Dimmable
Passive, silent cooling

Key Features
For Content Creators and Vloggers
196 Lux at 3.3' (5600K)
Variable Color Temperature: 3200-5600K
Battery-Powered Operation
CRI/TLCI: 97+
Smartphone Photo Trigger on Handgrip
Eight FX Modes
HSI and CCT Modes
Two 1/4"-20 Mounting Threads
Two Cold Shoe Accessory Mounts
The TL15RS RGB Bi-Color Smartphone Video Camera Rig Light from GVM features a dual-handgrip and has an adjustable holder in the center to mount virtually any smartphone. The LEDs deliver a variable color temperature of 3200 to 5600K with 1 to 99% brightness dimming. An included battery neatly installs on the back and powers the light. A photo trigger on one of the handgrips works wirelessly over Bluetooth so you can take photos with your phone without taking your hands off the handgrips. Additionally, two shoe mounts allow you to attach accessories to the top, and 1/4"-20 threads let you mount the rig on a tripod or stand in vertical or horizontal setups.

Dual-handgrip and adjustable smartphone holder
Variable color temperature ranging from 3200 to 5600K
Green/magenta correction feature for color balancing with fluorescent lights
Adjustable hue, saturation, and light intensity
Eight FX modes for lightning, cop car, candle, TV, party, disco, bad bulb, and paparazzi
Rechargeable NP-F battery neatly installs on the rear and powers the light
Bluetooth compatible smartphone photo trigger on handgrip
Two shoe mounts to attach accessories
Optional DC power adapter

Key Features
For Vlogging, YouTube, Streaming, TikTok
1-Person Shoot to Camera/Phone/Computer
Clip-On Transmitter/Mic + Lav Mic
Clip-On Receiver with Headphone Jack
Automatic Pairing for Easy Operation
3.5mm Cables for Camera & Mobile Device
USB-Rechargeable 4-Hour Batteries
Up to 164' Operating Range
The KKX-WM01 from GVM is a compact wireless microphone system providing hands-free audio for videos on Instagram, YouTube, and TikTok or for live-streaming, vlogging, meetings, interviews, and online classes. It offers a complete, versatile, and simple-to-use solution for recording conversations and speech directly to a mirrorless/DSLR camera or a mobile device with a 3.5mm headphone jack.

The KKX-WM01 consists of a small, lightweight clip-on transmitter with its own built-in microphone along with an included lavalier mic that can be used if you prefer a more discreet mic setup. The lav includes a foam windshield to protect against breath and wind noise. The system also includes a small clip-on receiver that mounts on your camera or mobile device and connects to its 3.5mm input jack. Both a 3.5mm TRS cable, for camera and computer use, and a 3.5mm TRRS cable, for smartphone use, are included.

The system delivers reliable transmission with clear sound at a line-of-sight distance up to 164' (98' with limited obstacles). The receiver features a 3.5mm headphone jack, enabling you to monitor your audio in real time. The built-in rechargeable batteries provide up to 4 hours of operation and recharge via USB Type-C ports. A split USB charging cable is included that allows you to charge both components at the same time.

Clip-On Transmitter with Built-In Mic + Lavalier Mic
The compact transmitter is equipped with both a built-in microphone and a 3.5mm input that accepts its included lavalier microphone.
The transmitter can be clipped to your collar, tie, or pocket without having to wire yourself or your talent, providing a fast, truly wireless setup.
Use the lavalier if you prefer a more discreet look and have time to mic up your talent.
Compact Single-Channel Receiver
The tiny, lightweight receiver features a clip to attach to cameras and mobile devices.
The receiver features a 3.5mm output jack.
3.5mm cables for mobile devices and cameras are included.
Straightforward Menu-Free Operation
The system is easy to use, and the components pair automatically.
The transmitter and the receiver are powered for up to 4 hours via a built-in rechargeable battery.
The components feature LEDs to indicate battery status.
A split USB charging cable is included.
Monitor in Real Time
If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.
2.4 GHz Digital Wireless
To avoid interference from TV and radio waves, the system operates in the 2.4 GHz frequency band—far away from television, radio, and UHF wireless microphone transmissions.
The system offers a line-of-sight operating range up to 164 feet or up to 98 feet when some obstacles are present.
For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.
The system offers a low latency of only 10ms.

Key Features
Color Temp: 3200 to 5600K, CRI/TLCI: 97
Stepless Dimming, AC Adapter
Optional NP-F Battery Power
Desktop Stand and Carry Case
The Bi-Color Edge Video LED Soft Light (10") from GVM is a good choice for beauty, makeup, hair, or for use as a main light in fashion or portraiture. The round, dimmable fixture has a 10" diameter and variable color temperature from 3200 to 5600K to match ambient light conditions, other fixtures, or just for creative expression. A bonus of the light's form factor are the natural-looking catchlights reflected in your subject's eyes. While you can control adjustments locally on the fixture, you can also make them wirelessly via a smart device app. The Y30D160 runs on AC voltage but it will also run on two optional NP-F-type batteries when AC power is unavailable.

Stepless, adjustable, dual color temperature feature: color range of 3200-5600K, CRI and TLCI 97+
App-intelligent system can be controlled by your smart mobile devices
Stable digital screen display system can support 360° rotation
Host and Slave Modes: If you have two or more devices you can switch one device to Host Mode and the other(s) to Slave Mode, and control the Host Mode device through the app, while the Slave devices will mirror the performance of the Host
Pressing the Wi-Fi reset button for 5 seconds allows resetting of the Wi-Fi username and password