10-layer carbon fibre in 3 sections
Included centre column
Mounting plate can be swapped for 75mm half ball adapter
Built-in spirit level in the tripod shoulder
Smooth twist locks – a quarter turn is enough to loosen the section
Covers for secure grip in hot and cold conditions
Stabilising hook with integrated Allen key
Weight: 1.7kg
Max. load: 22kg
The RX series tripods are the largest of the SIRUI tripods. With their high load of up to 25kg, they are particularly suited to working in the studio and with large, heavy DSLR and video cameras. The special feature of the RX series is its removable mounting plate. It can be replaced with the 75mm half ball adapter (and can be used with the optional SIRUI Y-75B levelling half ball). This means that it can be used on a SIRUI video tilt head, for example. To make changing between the plate and the half ball easier, an Allen key is integrated into the stabilising hook.

The leg tubes are made from 10-layer carbon fibre, making the tripod extremely lightweight but very stable. Depending on the surface, the non-slip rubber feet can be replaced with robust stainless steel spikes (included).

– 10-layer carbon fibre in 3 sections
– Included carbon fibre centre column
– Mounting plate can be swapped for 75mm half ball adapter
– 3/8 inch screw for tripod heads, camera or camcorder
– Built-in spirit level in the tripod shoulder
– Locking screw for head
– Smooth twist locks – a quarter turn is enough to loosen the section
– Covers for secure grip in hot and cold conditions
– Stabilising hook with integrated Allen key

– Weight: 1.7kg
– Max. load: 22kg
– Height: 120mm – 1780mm
– Closed size: 61cm
– Tube diameter: 25.8 – 33mm

Compatibility
Cameras, camcorder, tripod heads with 3/8 inch thread

Included
1x SIRUI R-3213X tripod carbon fibre
1x Carbon Center column
1x RX-75A 75mm half ball adapter
3x Stainless steel spikes
1x Transport bag with strap
*Levelling half ball not included
* Video Head not included

Key Features
Load Capacity: 30.9 lb
Maximum Height: 70.3"
Max Height Without Center Column: 60.4"
Minimum Height: 15.4"
Folded Length: 23.2"
Leg Sections: 4
Weight: 7.3 lb
Carbon Fiber Legs with Twist Lock Joints
Geared Center Column with Locking Collar
Carrying Case with Shoulder Strap
The R-4214E Geared Center Column Carbon Fiber Tripod from Sirui is a robust carbon fiber tripod with a maximum height of 70.3", and a load capacity of 30.9 pounds, making it suitable for use with heavy camera setups, telescopes, precision measuring devices, and more. The center column is gear-driven for precise positioning and has a locking collar. The top of the center column features a reversible 3/8"-16 to 1/4"-20 threaded head mounting tip. The base of the center column also features a 3/8"-16 threaded tip for mounting a head in the inverted position.

The carbon fiber legs have independent spread and three locking positions for a variety of heights and to help achieve level on uneven terrain. Each leg has a padded leg cover for improved grip. The tripod legs have a graduated scale in 5cm increments for scenarios that require precise height adjustments. The rubber feet are removable and a set 3x spiked feet are included, so the R-4214E can have traction on any type of surface.

Geared center column with locking collar
Center column crank folds for easy storage
Independent leg spread
Three locking leg angles
Legs feature graduated scales
Padded leg covers for improved grip
Reversible 3/8"-16 to 1/4"-20 head mount
Bubble level
Included 3-spiked foot set

Introducing the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head: Elevate Your Photography Game with Unmatched Precision and Durability

The Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head is a masterpiece of engineering, designed to exceed the expectations of professional photographers and outdoor enthusiasts. This remarkable tripod and ball head combo offers unparalleled stability, exceptional waterproof capabilities, and precise control, allowing you to capture awe-inspiring images in any challenging environment.

Unrivaled Stability and Durability:

Crafted from premium carbon fiber material, the Sirui ST-124 tripod combines strength with lightweight construction, making it easy to carry without compromising stability. Its robust design allows for a maximum load capacity of up to 12 kilograms, ensuring that your camera and lenses remain secure and steady, even when shooting with heavy equipment. Say goodbye to shaky shots and welcome crystal-clear images that truly stand out.

Weatherproof Performance:

With the Sirui ST-124 tripod, adverse weather conditions are no longer an obstacle. This tripod is not just resistant to dust and dirt but waterproof, making it perfect for photographers who are constantly pushing their boundaries. Whether you’re shooting in the rain, near water bodies, or even in sandy environments, rest assured that your gear will remain safe and protected, allowing you to focus on capturing breathtaking moments.

ST-10X Ball Head for Precise Control:

The included ST-10X Ball Head is a testament to Sirui’s commitment to precision and excellence. With separate knobs for panning, friction control, and locking, you have full control over the movement of your camera. The Arca-Swiss compatible quick-release plate enables seamless attachment and detachment, ensuring swift camera adjustments on the go. The ST-10X Ball Head allows you to capture the perfect composition with ease, empowering your creative vision.the dual panning clamp and base allow for easy panorama shooting.

Versatility and Adaptability:

The Sirui ST-124 tripod is designed to adapt to any shooting scenario. Its four-section legs can be independently adjusted to three different angles, allowing for stable positioning on uneven terrain. The tripod also features a reversible center column, enabling you to achieve low-angle shots or even use it for macro photography. With its versatility, this tripod opens up endless possibilities for your creative exploration.

Ease of Use and Portability:

Setting up the Sirui ST-124 tripod is a breeze, thanks to its user-friendly design and quick-lock leg system. The twist locks ensure fast and secure leg extension and retraction, allowing you to focus on capturing the perfect shot. When it’s time to move or pack up, the tripod collapses to a compact size for easy transportation. Weighing just 1.6 kilograms, the ST-124 is incredibly lightweight, making it a trusted companion for photographers on the move.

Embrace the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head and elevate your photography game to new heights. With its unbeatable stability, exceptional weatherproof performance, precise control, and adaptability, this tripod is a must-have tool for professionals and adventurers alike. Don’t let challenging environments hinder your creativity—unleash your vision with confidence using the Sirui ST-124.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.6kg
– Max. load: 12kg
– Tripod height: 450mm – 1710mm
– Closed size: 570mm

Included
1x SIRUI ST-124 waterproof tripod carbon fibre
1x ST-10X Ball head with QR plate
1x Transport bag with strap



The Sirui ST-10X Ball Head are designed and built to the highest standards. The ST-10X ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 38mm
– Weight: 0.43kg
– Height: 85mm
– Load Capacity: 20kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Sirui ST-224 Waterproof Carbon Fiber Tripod with ST-20 Ball Head

Load Capacity: 15kg
Leg Sections: 4
Weight: 1.9kg
Ultra Low profile design
Triangle Center Column
Integrated Stainless Steel Spikes and Rubber Feet
ST-20 Ball Head

Knobs for Pan, Tilt & Tension
Panning clamp
550 grams
Aluminium knobs for added durability
35 kg Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui ST-224 Waterproof Carbon Fibre Tripod with ST-20 Ball Head is protected from water, dirt and dust. In addition, it has a newly designed locking mechanism for comfortable operation and a spirit level for accurate alignment. The tripod tubes are manufactured from 8-layer carbon fibre (reduced weight, increased stability, vibration-free). The centre column is made in a triangle shape to enhance rigidity and also allows for the profile of the tripod to be extremely low profile when folded. The legs have three ratchet positions to allow for different angles and extension. The tripod measures just 48cm when collapsed. Each leg is made of 4 sections with 3 sealed twist locks. Rubber feet and metal spikes ensure that the tripod is stable on any surface.

A stabilising hook on the centre column is a SIRUI standard and a transport bag. The bag strap can also be used as a tripod strap.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.9kg
– Max. load: 15kg
– Tripod height: 520mm – 1840mm
– Closed size: 610mm

Included
1x SIRUI ST-224 waterproof tripod carbon fibre
1x ST-20 Ball head with QR plate
1x Transport bag with strap



The Sirui ST-20 Ball Head are designed and built to the highest standards. The ST-20 ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 40mm
– Weight: 0.55kg
– Height: 90mm
– Load Capacity: 35kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Brand Sirui
Color Traveler 5
Compatible Devices Camera
Material Carbon Fiber
Item Weight 1.87 Pounds
Weight Limit 8.8 Pounds
Maximum Height 54.3 Inches
Tripod Head Type Ball Heads
Number of leg sections 5
Solid Construction: High quality carbon fiber camera tripod, construction for maximum lightness and sturdiness. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 8.8lbs/4kg. Tripod weighs only 1.87lbs/0.85kg.
Adjustable and Extendable: 5-section carbon fiber legs with quick release twist-locks allow you to adjust the working height from 6.3" to 54.3" in seconds, while with a folded height of 13". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions.
Aluminum Ball-Head: With two independent control knobs, the ball-head can rotate smoothly and tilt vertically to take panoramic and portrait shots. A quick release plate with standard 1/4" screw is equipped for a fast camera connection.
Multi-angle Shooting: The center column inverted function ensures extreme low angle photography and macro shooting. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights.
Easy to carry: Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 13" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel.

Shoulderless: With a reverse leg fold-up, easily backpack the 12.4 inches/315mm compact fit and carry less at a weight approximate to 1.58lbs/0.72kg(without head).

Multiple Working Height: Remove the center column for low angle and macro shots. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights.

Easy Leg Adjustments: Adjust the legs to your desired angle by pulling out the semi-automatic leg angle adjustment button. Easily set up the legs with a quick turn twist of the leg locks.

Shoot Beyond Your View: Smoothly pan the head 360° to capture a beautiful landscape panorama shot.
SIRUI Compact Traveler Tripod 5CX
MATERIAL: CARBON FIBER
Sections: 5
Max. Tube Diameter(mm/inch): 22/0.87
Min. Tube Diameter(mm/inch): 10/0.39
Min. Height(mm/inch): 90/3.54
Max. Height(mm/inch): 1320/51.97
Retracted Height(mm/inch): 535/21.1
Folded Height(mm/inch): 315/12.4
Weight(kg/lbs): 0.85/1.87
Max. Load(kg/lbs): 4/8.8
Ball Head Specification:
Diameter(mm/inch): 29/1.15
Height(mm/inch): 70/2.76
Weight(kg/lbs): 0.21/0.45
Max. Load(kg/lbs): 10/22

Brand Sirui
Color Black
Compatible Devices Camcorder, Cellphone, Camera
Special Feature Full-size, Compact, Adjustable-panning
Material Carbon Fiber
Weight Limit 6.61 Pounds
Maximum Height 62.6 Inches
Tripod Head Type Fluid Heads
Minimum Height 17.72 Inches
Number of leg sections 4
Carbon Fiber Construction - High quality carbon fiber video tripod, lightweight and sturdy. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 3kg/6.61lb. Tripod weighs only 2.8lbs/1.27kg (Without video head).
Adjustable and Extendable - 4 section Carbon Fiber legs with quick release twist-locks allow you to adjust the working height from 17.7" to 62.6" in seconds, while with a folded height of 18.5". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions.
2-in-1 Video Tripod and Monopod - 2 in 1 video camera tripod, it's functional design allows it to be used in video tripod, monopod or alpenstock mode to make your photography more diverse, you can converted into a full size monopod by screwing together the center column and the removable tripod leg. Its invertible central column also allows for super low shots and great Macro control.
VA-5 Ultra-Compact Fluid Video Head - The VA-5 Fluid Video Head weighing in at 1.3 lbs while holding up to 6.6 lbs. The VA-5 fluid head utilizes two bubble levels – one on the base of the head for tripod alignment and one on the top for camera alignment. An internal spring-assisted counter-balance provides for smooth 360° pans and +90°/-70° tilts.
Easy to Carry - Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 18.5" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel.

Designed for cleaning of camera lenses and other optical items
The cleaning tip has a slightly concave shape for a better fit
A retractable dust-removal brush is built-in
Its non-liquid carbon cleaning compound won’t spill or dry out
It’s safe to use and environmentally friendly

Professional carbon fiber photography slide

The new GVM-GP-80FW is a professional carbon fiber photography slide with flywheel. It supports up to 11 pounds of load and provides 31″ travel distance. The upgraded version of fluid damping is a very practical core technology: it can run at constant speed only by hand. Even the new photographer can easily use it, and the actual picture quality is quite stable.

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Key Features
Wireless Programmable Motorized Slider
Robust 31" Portable Travel Slider
Carbon Fiber Rails
Supports up to 5.5 lb
1/4"-20 and 3/8"-16 Tripod Mounting
Hot Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
Integrated Display on Remote Controller
The 31" GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider is a motorized slider you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of slider travel. The slider carriage has a built-in bubble level, so you can check that your setup is level. Built-in feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot-swap for uninterrupted use. The two included NP-F750 type batteries will run the system for approximately 10 hours. The remote features an integrated display and during time-lapse moves can be turned off to save battery power.

Remote Controller
The wireless controller features its own internal battery and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest

1/4″ and 3/8″ Screw. Motorized camera sliders with 1/4 “and 3/8” tapped holes can be mounted on a tripod or light stand to support multiple angles.

It can also be used on feet and height-adjustable floors.

Multi-target Switching

With 2 axes (horizontal, tilt, and rotation), you can easily switch shooting targets, and also make a smooth transition between these targets as the slider moves.

Multi-angle Shooting with High Load Capacity

The camera slider is compatible with light stands or camera tripods for shooting at different angles.

Moreover, it has a load capacity of up to 11 pounds, which makes horizontal and vertical shooting smoother.

Powered by AC adapter or NP F750 battery (not included). In time-lapse mode, the battery may last for nearly 10 hours
GVM 2D 2-Axis Wireless Carbon Fiber Motorized Slider

1x Motorized Slider

1 x Controller

x Battery

2 x Battery Charger

1 x Controller Connection Line

6 x Shutter Link

1 x Shutter Extension Line

1 x Carrying Bag

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
The 32″ ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31″ of travel.

The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.

You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:

DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the move

Remote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting

The slider can traverse the 31″ sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Black
Brand GVM Great Video Maker
Compatible Devices Camcorder, Camera
Item Dimensions LxWxH 48 x 7.5 x 4 inches
Item Weight 11 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
【High quality motorized slider】-this 49”, 120cm motorized camera slider is made of carbon fiber with a stable carriage assembly and remote controller for improved strength, efficiency, ease of operation, repeatability and flexibility.
【3 shooting modes】-can achieve horizontal/tracking /120º panoramic shooting via adjusting the rod position to get multi-angle shootings effects.The rod position of tracking shooting is up-left & down-right; Panorama shooting is down-left & up-right; horizontal shooting is the horizontal adjustment.
【2 menus of shooting】-one is video capture to make you have uniform motion speed at any time and auto round trip via set starting point and ending point, another is time lapse to get 1000 pieces photos at this time and can accurate step distance and auto round trip via set starting point and ending point.
【With multiple 1/4 "and 3/8" Screw ports 】-The motorized camera slider equipped with multiple 1/4 "and 3/8" Screw ports for installing on the Most of tripod, using the screw holes can vertical, horizontal and 45 degrees shooting.
【 6 shutter release Cable and 1 extension cable】-the motorized camera slider equipped 6 shutter line to compatible most kinds of camera, you can use the extension cable to solve the issue of the line not enough length.All-round to meet your Shooting needs and Improve the shooting Grade, making the shooting more professional and more shocking.

Color 32"/80cm
Brand GVM Great Video Maker
Compatible Devices Camera, Cellphone
Item Dimensions LxWxH 38 x 24 x 12 inches
Item Weight 10 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
SUPPORT MULTIPLE SHOOTING MODES: Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point. Set A/B Points and Time-Lapse Keyframes: Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images.
1 TO 100% ADJUSTABLE SLIDING SPEED: The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode, In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
WIRELESS IOS/ANDROID APP CONTROL: Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion.
1/4"-20 AND 3/8"-16 TRIPOD MOUNT THREADS: The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. 1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
BELT DRIVEN WITH BATTERY-POWERED MOTOR: The motor is positioned on one end of the slider and features a L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras.

The Cinema C5 Matte Box Filmmaker Kit from NiSi is a lightweight, clamp-on matte box system that supports 4 x 4" and 4 x 5.6" filters. Crafted for cinema-style production applications, the C5 works in concert with NiSi's cinema line of filters and 4 x 4" rotating circular filters. Built from plastic, aluminum, and carbon fiber, the matte box has a carbon fiber top flag for better control over glare from overhead light sources.

The filter holder features a top slot for 4x4 filters and a side slot for 4 x 5.65" filters, with the included filter trays supporting 2 and 4mm thick filters. The matte box facilitates having the filters as close as possible to the lens to ensure that vignetting does not occur. This kit includes a filter pouch for storing filters and additional accessories, as well as a set of adapter rings for using the matte box on lenses with 67, 72, 77, and 82mm front threads. Also included with this kit are a True Color VND 1-5 Stops filter, an FS ND16 4 x 5.65" filter, and a 1/8 Black Mist 4 x 5.65" filter.

The Cinema C5 Matte Box Cinema Kit from NiSi is a lightweight, clamp-on matte box system that supports 4 x 4" and 4 x 5.6" filters. Crafted for cinema-style production applications, the C5 works in concert with NiSi's cinema line of filters and 4 x 4" rotating circular filters. Built from plastic, aluminum, and carbon fiber, the matte box has a carbon fiber top flag for better control over glare from overhead light sources.

The filter holder features a top slot for 4x4 filters and a side slot for 4 x 5.65" filters, with the included filter trays supporting 2 and 4mm thick filters. The matte box facilitates having the filters as close as possible to the lens to ensure that vignetting does not occur. This kit includes a filter pouch for storing filters and additional accessories, as well as a set of adapter rings for using the matte box on lenses with 67, 72, 77, and 82mm front threads. Also included with this kit are a True Color VND 1-5 Stops filter, a True Color Rotating PL filter, an FS ND16 4 x 5.65" filter, and a 1/8 Black Mist 4 x 5.65" filter.

The Cinema C5 Matte Box Starter Kit from NiSi is a lightweight, clamp-on matte box system that supports 4 x 4" and 4 x 5.6" filters. Crafted for cinema-style production applications, the C5 works in concert with NiSi's cinema line of filters and 4 x 4" rotating circular filters. Built from plastic, aluminum, and carbon fiber, the matte box has a carbon fiber top flag for better control over glare from overhead light sources.

The filter holder features a top slot for 4x4 filters and a side slot for 4 x 5.65" filters, with the included filter trays supporting 2 and 4mm thick filters. The matte box facilitates having the filters as close as possible to the lens to ensure that vignetting does not occur. This kit includes a filter pouch for storing filters and additional accessories, as well as a set of adapter rings for using the matte box on lenses with 67, 72, 77, and 82mm front threads.