Key Features
Load Capacity: 6.6 lb
Maximum Height: 60.4"
Minimum Height: 8.6"
Folded Length: 20.2"
Leg Sections: 4
Aluminum-Constructed Legs
Flip Leg Lock System
Fluid System for Smooth Pans and Tilts
Spring-Assisted Counterbalance
TY-70A Quick-Release Plate
Gain the advantage of using the ET-2004 Aluminum Tripod with VA5 Video Head Kit from Sirui, where features from both the photo and video worlds combine into one tripod. With the quickness of the tripod's flip leg lock system and the compact size of the fluid head, you can be ready to go and capture video at a moment's notice.

Sirui VA-5 Ultra-Compact Video Head
The SIRUI VA-5 Ultra-Compact Video Head uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 6.6 lb. It features independent pan and tilt locks and uses an internal spring-assisted counterbalance mechanism for smoother tilt movements with heavier cameras. A TY-70A quick-release plate comes included, for forward/backward adjustment possible when attached to the head to help balance your camera. A dual safety lock system prevents the plate and your camera from falling off the head when the primary locking mechanism is loosened. To release the plate, simply press the secondary release button. To assist in horizontal alignment of your shots, the head has two bubble levels: one on the base of the head to align the tripod and one on the top of the head to align the camera. One pan handle comes included.

For DSLRs or compact video cameras up to 6.6 lb
Fluid system for smooth pan and tilts
Internal spring-loaded counterbalance mechanism
Quick-release plate with forward/backward adjustment
Dual safety lock system prevents plate from slipping off head
Two bubble levels: one at base of head, one a top of head
Accepts SIRUI TY-50/60/70/70-2 and LP-40/75 and many Arca-compatible quick release plates
Sirui ET-2004 Travel Aluminum Tripod
The ET-2004 Travel Aluminum Tripod from Sirui is a 4-section support with a flip leg lock system that you can disengage to give you the ability to extend the legs along with the standard rapid center column to a maximum height of 57.1". With its three variable leg angles and independent leg spread, the tripod's legs can conform to uneven terrain; splaying the tripod's legs out and switching the standard center column to the included short column, the support can go to a minimum height of 5.3". The legs fold in the reverse to a compact 16.9" to travel with the tripod, and the rubber feet on the legs prevent the tripod from sliding on smooth and flat surfaces. In addition, the feet retract back to reveal metal spikes to further stabilize the support on softer terrain.

Key Features
Knobs for Pan, Tilt & Tension
55 lb Load Capacity
Quick Release Plate
Arca-Type Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-20x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-type clamp for the included quick release plate. The pan, tilt, and quick release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation.

The interior ball locking of the K-20x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 55 lb. The quick release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-type platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-20x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-type quick release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
66 lb Load Capacity
QR Plate with Anti-Twist Rubber Mat
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-30x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation, and the quick-release plate has a rubberized surface that prevents camera twist when it's tilted 90°.

The interior ball locking of the K-30x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 66 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-30x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
77 lb Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-40X Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation. There's also a video pin on the plate to keep camcorders from twisting.

The interior ball locking of the K-40X head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 77 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security and stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-40X is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Easily attachable and detachable, the SIRUI MP-AC-01 mobile phone clamp is compatible with quick release plates and photographic accessories via the built-in 1/4” accessory port for extensive mobile shoots. Need a quick phone setup without a scratch? With a simple press of the tension release button, the phone clamp with rubber cushion padded interior will automatically open to fit or release a mobile phone measuring 4 to 6 inches.

Specifications for the MP-AC-01

Size：：76x32x40mm/2.99 x1.26x1.57inches

Weight：40g/0.09lb

Max. Load Capacity：300g/0.66lbs

Key Features
Works as a Tripod or Selfie Stick
Extends from 15.7 to 54.3" in Height
Supports up to 14.1 oz
Bluetooth Remote Works up to 32.8' Away
Includes Mobile Phone Clamp
Switch Between Portrait/Landscape Mode
Small and Compact
Small and compact, the MS-01K Umbrella Mobile Tripod from Sirui can be configured as either a tripod or a selfie stick. Its supports up to 14.1 oz, has a minimum height of 15.7", and can be extended up to 54.3". Its native mount is a GoPro head, but using the included mobile phone clamp, you'll be able to shoot with smartphones in portrait or landscape mode, and the included Bluetooth remote control works from up to 32.8' away.

General Features
Shoulderless Shooting
With a weight of 0.86 pounds, this can be easily held or shouldered while on the road.
Quick Switch for Extensive Shoots
The MS-01K can be easily configured as either a tripod or a selfie stick.
Break the Framing
Capture more with a smooth extension of the 5-section column to a maximum height of 54.3".
Flexible Angle Adjustments
Shoot at multiple angles with a gradual front or back tilting of the mounting platform. With one simple 90° tweak, you'll be able to capture photos in portrait or landscape mode.
Detachable Bluetooth Remote Shutter
Freeze the moment with a quick press of the Bluetooth remote control shutter from up to 32.8' away.
Solid Umbrella Base
The umbrella base smoothly slides up and down for fast setup.
A Reliable Companion
Get hands free with the leg spreader to shoot steady mobile video, whether recording or live streaming.

Key Features
Load Capacity: 33.1 lb
Maximum Height: 68.1"
Minimum Height: 9.1"
Folded Length: 24.6"
Leg Sections: 4
Weight: 4.5 lb
Aluminum-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The R2004 Aluminum Tripod with E-20 Ball Head set from Sirui combines the lightweight and portable R2004 aluminum leg set with the versatile E-20 ball head with Arca-type quick release system to form a compact and lightweight tripod that is equally at home in the studio or on location.

Sirui R2004 Aluminum Tripod
The 3.7 lb R2004 Aluminum Tripod from Sirui is a 4-section support with aluminum-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

Sirui E-20 Ball Head with TY-50E Plate
The E-20 Ball Head with TY-50E Plate from Sirui is a 12.7 oz aluminum camera support that features an Arca-type compatible quick release system. The head has two separate knobs, the larger knob unlocks to release the ball movement, and the independent pan lock releases the 360° panning base, which has 5° scale markings.

The weight capacity of the ball head is 26.5 lb, which makes it suitable to support large DSLR and medium format cameras. Furthermore, inside the clamp there is a safety stop and on the side of the clamp a security pin release button, which prevents the plate from accidentally sliding and falling out. The included TY-50E plate has a machined eyelet for a hand or shoulder strap.

Arca-type compatible ball head with safety stop and security pin release button
360° panning base with 5° scale increments
Integrated spirit bubble level for balancing
Machined eyelet on the quick release place for a hand or shoulder strap

Key Features
Load Capacity: 33.1 lb
Maximum Height: 64.2"
Minimum Height: 15.2"
Folded Length: 20.7"
Leg Sections: 4
Weight: 2.9 lb
Carbon Fiber-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The 2.9 lb R2204 Carbon Fiber Tripod from Sirui is a 4-section support with carbon fiber-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

SIRUI tripod for studio and large cameras - with center column and bag

The RX series tripods are the largest among the SIRUI tripods. With their high load capacity of 18 to 30kg, they are especially suitable for working in the studio and with large, heavy DSLR and video cameras.

The special feature of the R-2214X is the exchangeable mounting plate. It can be exchanged for the included 75mm adapter half-shell R2X-75A or the also included center column RX-402C. This way, for example, a SIRUI video head can be used on the tripod or the maximum working height can be increased by 38cm with the center column. To facilitate the change between plate and bowl or center column, an Allen key is integrated in the stabilizing hook.

The tubes of the legs are made of 10 layers of carbon, which makes the tripods extremely light but at the same time very stable. Depending on the surface, the non-slip rubber feet can be exchanged for robust stainless steel spikes (included).

- Carbon 10x carbon fiber in 4 sections
- incl. center column RX-402C and adapter half-shell R2X-75A
- center column reversible for ground level shooting
- mounting plate exchangeable against 75mm adapter half-shell or center column
- 3/8" screw for tripod heads, camera or camcorder
- Built-in leveling bubble in the tripod shoulder
- Fixation screw for tripod head
- Easy-action twist locks - half a turn is enough to loosen
- Protective handles for a secure grip in cold and heat
- Stabilizing hook with integrated Allen key

- Weight: 1,6kg (with center column 1,95kg)
- Max. Load Capacity: 18kg
- Height: 11.5 - 145cm (183cm with centre column)
- Pack Size: 51cm (with centre column 59cm)
- Tube Diameter: 18,6 - 29,4mm

Compatibility
Cameras, camcorders, tripod heads with 3/8" thread
SIRUI RX-75B levelling hemisphere

Included indelivery
1x SIRUI R-2214X tripod carbon
1x R2X-75A adapter hemisphere ø75mm
1x mounting plate ø63mm
1x RX-402C center column
3x stainless steel spike
1x carrying bag with strap
*Video head, levelling hemisphere not included in delivery

10-layer carbon fibre in 3 sections
Included centre column
Mounting plate can be swapped for 75mm half ball adapter
Built-in spirit level in the tripod shoulder
Smooth twist locks – a quarter turn is enough to loosen the section
Covers for secure grip in hot and cold conditions
Stabilising hook with integrated Allen key
Weight: 1.7kg
Max. load: 22kg
The RX series tripods are the largest of the SIRUI tripods. With their high load of up to 25kg, they are particularly suited to working in the studio and with large, heavy DSLR and video cameras. The special feature of the RX series is its removable mounting plate. It can be replaced with the 75mm half ball adapter (and can be used with the optional SIRUI Y-75B levelling half ball). This means that it can be used on a SIRUI video tilt head, for example. To make changing between the plate and the half ball easier, an Allen key is integrated into the stabilising hook.

The leg tubes are made from 10-layer carbon fibre, making the tripod extremely lightweight but very stable. Depending on the surface, the non-slip rubber feet can be replaced with robust stainless steel spikes (included).

– 10-layer carbon fibre in 3 sections
– Included carbon fibre centre column
– Mounting plate can be swapped for 75mm half ball adapter
– 3/8 inch screw for tripod heads, camera or camcorder
– Built-in spirit level in the tripod shoulder
– Locking screw for head
– Smooth twist locks – a quarter turn is enough to loosen the section
– Covers for secure grip in hot and cold conditions
– Stabilising hook with integrated Allen key

– Weight: 1.7kg
– Max. load: 22kg
– Height: 120mm – 1780mm
– Closed size: 61cm
– Tube diameter: 25.8 – 33mm

Compatibility
Cameras, camcorder, tripod heads with 3/8 inch thread

Included
1x SIRUI R-3213X tripod carbon fibre
1x Carbon Center column
1x RX-75A 75mm half ball adapter
3x Stainless steel spikes
1x Transport bag with strap
*Levelling half ball not included
* Video Head not included

Key Features
Load Capacity: 30.9 lb
Maximum Height: 70.3"
Max Height Without Center Column: 60.4"
Minimum Height: 15.4"
Folded Length: 23.2"
Leg Sections: 4
Weight: 7.3 lb
Carbon Fiber Legs with Twist Lock Joints
Geared Center Column with Locking Collar
Carrying Case with Shoulder Strap
The R-4214E Geared Center Column Carbon Fiber Tripod from Sirui is a robust carbon fiber tripod with a maximum height of 70.3", and a load capacity of 30.9 pounds, making it suitable for use with heavy camera setups, telescopes, precision measuring devices, and more. The center column is gear-driven for precise positioning and has a locking collar. The top of the center column features a reversible 3/8"-16 to 1/4"-20 threaded head mounting tip. The base of the center column also features a 3/8"-16 threaded tip for mounting a head in the inverted position.

The carbon fiber legs have independent spread and three locking positions for a variety of heights and to help achieve level on uneven terrain. Each leg has a padded leg cover for improved grip. The tripod legs have a graduated scale in 5cm increments for scenarios that require precise height adjustments. The rubber feet are removable and a set 3x spiked feet are included, so the R-4214E can have traction on any type of surface.

Geared center column with locking collar
Center column crank folds for easy storage
Independent leg spread
Three locking leg angles
Legs feature graduated scales
Padded leg covers for improved grip
Reversible 3/8"-16 to 1/4"-20 head mount
Bubble level
Included 3-spiked foot set

Technical data Softbox
- 16 struts
- Diameter: 101 cm
- Depth: 43.5 cm
- Pack size: Height 65 cm / Diameter: 18 cm
- Weight (with grid and diffuser fabrics): 1800 g

Compatibility
SIRUI C-Series LED Continuous Lights
Flashes or continuous lights with Bowens S-Type bayonet

Scope of delivery
1x SIRUI RGX105 softbox 101cm
1x front diffuser
1x inner diffuser
1x grid
1x softbox bag
*flashgun, continuous light & tripod not included.

- 16 struts
- Diameter: 60 cm
- Depth: 30 cm
- Pack size: Height 42.5 cm / Diameter: 18 cm
- Weight (with grid and diffuser fabrics): 1100 g

Compatibility
SIRUI C-Series LED continuous lights
Flashes or continuous lights with Bowens S-Type bayonet

Scope of delivery
1x SIRUI RGX60 softbox 60cm
1x front diffuser
1x inner diffuser
1x grid
1x softbox bag
*flashgun, continuous light & tripod not included.

Key Features
For Photo, Video & Film Production
Output: 700 Lux at 3.3'
2500–8000K CCT; RGB Mode
Local, DMX, and Bluetooth Control
CRI 97 | TLCI 97
14 Built-In Special Effects
Battery Power / AC Power
Versatile in form and function, the Telescopic RGB Tube Light from SIRUI expands the creative potential of any shoot with its adjustable length and full spectrum of color outputs. The tube light is built to extend from 2 to 4', while the RGB and hue, saturation, and intensity modes allow for precision color selection. The color temperature range spans from 2500K to 8000K with an additional green/magenta adjustment for blending with any ambient light situation. The light also features 14 built-in special effects including police car, broken bulb, and candle.

A companion iOS/Android app allows for full functional control of the light via your phone with Bluetooth from distances up to 49'. Connect and control light groups with the app or with dual 3.5mm DMX interfaces. The light is powered by an internal lithium-ion battery that lasts for up to 2.5 hours on a full charge. The light can also be used while connected to the included charging adapter. A 1/4"-20 thread on the bottom lets you mount the light on an optional mini tripod or other compatible support.

Key Features
18 to 29" Length Adjustment
360° Full Color RGB Mode
14 Built-In Special Effects
Music Mode: Reacts to Music or Sound
2500-8000K Color Temperature / 97 CRI
iOS/Android App & 2.4GHz Remote Control
Mounting Ring & 1/4"-20 Mounting Thread
Mini Tripod Included
Memory Function for Saving Settings
Integrated 2-Hour Battery
Not only a tube light but a telescopically adjustable one, the T60 Telescopic RGB LED Video Light from Sirui is highly portable and easily suitable for a wide range of applications. It telescopically adjusts from 18 to 29" in length. A 1/4"-20 thread on the bottom lets you mount the light on an included mini tripod or various other supports. On the opposite end is a pull-out ring for hanging the light on a hook or something similar. You can also use the light handheld.

Three operating modes and a companion iOS/Android app together allow you to simulate numerous lighting effects. Using the app, you can control all functions of the light from a distance. A 2.4GHz wireless remote control is also included. It comes attached to the grip handle of the light and is removable and works from up to 49' away. You can use it to control multiple units by assigning them to specified groups.

The color temperature is adjustable from a warm 2500K to a cool white 8000K, and color accuracy is up to 97 CRI/TLCI. The three operating modes are 360° full color RGB mode, effects mode, and music mode. Color mode lets you select any color from the color spectrum and adjust saturation and brightness. Effects mode offers 14 built-in special effects, such as flash, laser, candle, and fireworks. In music mode, the light reacts to music or sound, useful for music videos and other purposes. There's a pickup hole on the bottom of the light for this purpose.

The light features a memory function where you can save up to 20 dialed-in settings so that you can access them directly the next time around. The T60 is powered by an internal lithium-ion battery that runs up to two hours at full power. A charging adapter is included for recharging it in approximately 1.5 hours.

The T60 uses SMD RGB LEDs. Also, it's designed to ensure consistent light output with no flicker.

Key Features
Robust Aluminum Lens for APS-C Cameras
2.4:1 De-Squeezed Format; 10-Blade Iris
Schott Glass with Nano Coatings
Horizontal Blue Streaks/Less Stray Light
The Sirui 50mm f/1.8 Anamorphic 1.33x Lens, with an X-mount, is designed for APS-C cameras and increases the horizontal FOV by 33% in comparison with traditional 50mm APS-C lenses. The result is equivalent to a wider, 37.5mm APS-C lens. After a de-squeeze, the captured image is displayed in an anamorphic 2.4:1 format in a 16:9 setting. This fast f/1.8 lens is designed with an aluminum housing and features optics with multilayer Nano coatings. It has renowned Schott optical glass lens elements and delivers rectangular aspect ratios, long horizontal lens flares, and oval bokeh.

One of the features of this lens is that it produces horizontal blue streaks with less stray light, which Sirui calls sci-fi horizontal flares. A key aspect of anamorphic lenses is highlighted oval bokeh, and this lens achieves a shallow depth of field and oval bokeh with its 10 aperture blades. While the lens has a robust housing, it's also designed to be lightweight for use with your compact APS-C camera.

Key Features
Robust lens with advanced optics for compact APS-C cameras
33% horizontal field of view increase over standard 50mm APS-C lenses
Anamorphic 2.4:1 format in a 16:9 setting after de-squeeze
Aluminum housing
Schott optical glass
Multilayer Nano coatings
Horizontal blue streaks with less stray light
10 aperture blades
2.8' minimum focusing distance
67mm filter thread
Magnification: 1:15.38 (V), 1:20.17 (H)

Key Features
75mm Anamorphic Fuji X Mount Cine Lens
f/1.8 Maximum Aperture, 13-Blade Iris
Robust Aluminum Lens for APS-C Cameras
2.4:1 Aspect Ratio; 13-Blade Iris
1.33x Cinematic Anamorphic Squeeze
Schott Glass with Nano Coatings
Distance Markings in Feet and Meters
Horizontal Blue Streaks, Oval Bokeh
Manual Focus, M67 Filter Size
Capture cinematic widescreen images when using a cine camera with an APS-C sensor size with this 75mm f/1.8 1.33x Anamorphic Lens from Sirui. The lens features a Fuji X mount and captures a widescreen 1.33x anamorphic image squeeze with an ultra-wide 2:4:1 aspect ratio when used with an APS-C sensor size. This design gives you a 33% increase in the horizontal field of view for a beautiful cinematic widescreen look.

This 75mm manual-focus lens is designed with a durable housing and features optics with protective lens coatings, 16 elements in 12 groups, a 13-blade iris, a minimum focus distance of 3.9', and a fast f/1.8 maximum aperture. It can also produce horizontal blue streaks with less stray light and has a soft, oval bokeh with a shallow depth of field while maintaining a sharp focus. You can utilize 67mm filters on the front of the lens, and it features distance markings in both feet and meters.

Key Features
Robust lens with advanced optics for cameras with an APS-C sensor
Anamorphic 2.4:1 format in a 16:9 frame after de-squeeze
Horizontal blue streaks with less stray light
Soft, oval bokeh with a shallow depth of field
13-blade iris
3.9' minimum focusing distance
67mm filter thread
Magnification: 1:14.47 (V), 1:18.45 (H)
Manual focus
Optical design features 16 elements in 12 groups
Distance markings in feet and meters

Key Features
For Film and Video Production
Output: 7000 Lux at 3.3' (5600K)
5600K CCT
AC and Optional Battery Power
Onboard, DMX, and Bluetooth App Control
CRI 96 | TLCI 98
Fan Cooled
Bowens S-Mount Compatibility
8 Built-In Lighting Effects
Compact and Lightweight Design
A compact and lightweight fixture for film and video production, this Sirui 150W Daylight LED Monolight features an impressively high output of 7000 lux at 3.3' and a daylight-balanced color temperature of 5600K. An independent control box lets you quickly change settings without touching the fixture itself, and the light can also be wirelessly controlled via the Sirui Light app. Additionally, for more advanced control methods, the control box is equipped with a 5-pin DMX input and output.

The light is designed with a Bowens S-mount for use with the included reflector and a wide range of other optional light modifiers, and eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding. For mounting on a light stand, a flexible yoke with two locking knobs let you rotate the fixture 360°, and a convenient hand strap is also included for on-the-fly and handheld use. Designed for indoor and outdoor setups, the light is equipped with an AC adapter and power cord for continuous use with mains power, and for location shoots the light can be conveniently powered by one V-mount battery.

Compact and lightweight design featuring consistent light output and excellent color reproduction.
Crafted from high-quality aluminum alloy for use in tough and demanding environments.
Independent control box to quickly change settings without touching the fixture itself.
Compatible with Sirui Light app for wireless operation.
DMX input and output for use with light boards.
Eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding.
Built-in fan to quietly dissipate heat.
Universally recognized Bowens S-mount compatible with a wide range of separately purchased light modifiers.
Compatible with optional V-mount batteries.

150w Bi-colour Monolight
Lightweight compact design
RCM approved for use in Australia
2800-7000K
12 lighting effects
Bluetooth app and unit controllable
6100LUX @1m
Dual power options
96 CRI, 98 TLCI
Introducing the Sirui C150B Bi-Colour LED Monolight.

Portable, compact, and high-powered the C150B is perfect for a constant light source for photography or video.

The C150B has an adjustable temperature from 2800k – 7000k, which is perfect for matching ambient light. An ultra-quiet operation matches perfectly with video use, where any ambient noise needs to be kept at a minimum. The C150B can be controlled via the SIRUI light app via Bluetooth or directly on the light controller itself. Twelve modes can be implemented to achieve different lighting situations or effects.

The Bowens mount is compatible with a vast range of diffusers or modifiers on the market, including Sirui’s range of soft boxes and diffusers. The U shaped bracket is perfect for quick and easy direction change and is easy to attach to a light stand.

Key Features
For Film and Video Production
Output: 12,500 Lux at 3.3' (5600K)
5600K CCT
AC and Optional Battery Power
Onboard, DMX, and Bluetooth App Control
CRI 96 | TLCI 98
Fan Cooled
Bowens S-Mount Compatibility
8 Built-In Lighting Effects
Compact and Lightweight Design
A compact and lightweight fixture for film and video production, this Sirui 300W Daylight LED Monolight features an impressively high output of 12,500 lux at 3.3' and a daylight-balanced color temperature of 5600K. An independent control box lets you quickly change settings without touching the fixture itself, and the light can also be wirelessly controlled via the Sirui Light app. Additionally, for more advanced control methods, the control box is equipped with a 5-pin DMX input and output.

The light is designed with a Bowens S-mount for use with the included reflector and a wide range of other optional light modifiers, and eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding. For mounting on a light stand, a flexible yoke with two locking knobs let you rotate the fixture 360°, and a convenient hand strap is also included for on-the-fly and handheld use. Designed for indoor and outdoor setups, the light is equipped with an AC adapter and power cord for continuous use with mains power, and for location shoots the light can be conveniently powered by two V-mount batteries.

Compact and lightweight design featuring consistent light output and excellent color reproduction.
Crafted from high-quality aluminum alloy for use in tough and demanding environments.
Independent control box to quickly change settings without touching the fixture itself.
Compatible with Sirui Light app for wireless operation.
DMX input and output for use with light boards.
Eight built-in special lighting effects including lightning, flash, broken bulb, TV, SOS, firework, impulse, and welding.
Built-in fan to quietly dissipate heat.
Universally recognized Bowens S-mount compatible with a wide range of separately purchased light modifiers.
Compatible with optional V-mount batteries.