1/4″ and 3/8″ Screw. Motorized camera sliders with 1/4 “and 3/8” tapped holes can be mounted on a tripod or light stand to support multiple angles.

It can also be used on feet and height-adjustable floors.

Multi-target Switching

With 2 axes (horizontal, tilt, and rotation), you can easily switch shooting targets, and also make a smooth transition between these targets as the slider moves.

Multi-angle Shooting with High Load Capacity

The camera slider is compatible with light stands or camera tripods for shooting at different angles.

Moreover, it has a load capacity of up to 11 pounds, which makes horizontal and vertical shooting smoother.

Powered by AC adapter or NP F750 battery (not included). In time-lapse mode, the battery may last for nearly 10 hours
GVM 2D 2-Axis Wireless Carbon Fiber Motorized Slider

1x Motorized Slider

1 x Controller

x Battery

2 x Battery Charger

1 x Controller Connection Line

6 x Shutter Link

1 x Shutter Extension Line

1 x Carrying Bag

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
The 32″ ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31″ of travel.

The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.

You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:

DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the move

Remote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting

The slider can traverse the 31″ sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
Dual-Handgrip Light with Phone Holder
For Vlogging and Tripod-Mount Setups
Vertical and Horizontal Attachment
Smartphone Photo Trigger on Handgrip
Powered by Included L-Series Battery
5600K Color Temperature with 97 CRI
0 to 99% Dimming
White and Orange Filters Included
2 x Cold Shoe Mounts; 1/4"-20 Threads
Optional DC Adapter Supported
The LT-10S Smartphone Video Camera Rig Light from GVM features a dual-handgrip design and includes an adjustable smartphone holder you can attach in the center. Mount virtually any smartphone in-between the two LED panels, which deliver either warm or cool white light thanks to two sets of filters. An included L-series battery neatly installs on the back and powers the light and a photo trigger on one of the handgrips.

Key Features
Dual Ball Heads
1/4" Connectors at Each End
Supports up to 8.8 lb.
The GVM Aluminum Alloy Adjustable Magic Arm greatly expands your options when using a camera, smartphone, LED light, monitor, microphone, etc. It features 1/4" bolts on each end and 180° rotation for your gear. The Magic Arm supports equipment up to 8.8 pounds.

compact and portable power solution for devices powered by L-series and v mount battery.The included V-mount adapter is a slim V-mount plate that accepts both included 6600mAh NP-F970 batteries or any other L-series batteries. The plate can be mounted on V-mount-powered devices such as cameras and lights to deliver power from L-series batteries. When the plate is used for gear such as certain cameras, two L-series batteries are required to be used because such high-powered devices require more than the 7.2V provided by a singe L-series battery.. The dual charger charges two batteries simultaneously and has an LCD showing the charge status of each battery. Designed with automatic current control, the charger also provides overcharge, over-discharge, over-temperature, overcurrent, overvoltage, and short-circuit protection. The charger is USB-powered and can be connected to a standard USB charger, a computer, or a portable USB power bank, and a USB charging cable is included.

Key Features
For Content Creators and Vloggers
Output: 877 Lux at 3.3' (6400K)
2700 to 10,000K; RGB Control
4 x 9.5"; AC/DC Operation
CRI 97
Onboard and Bluetooth Control
Passive Cooling
0 to 100% Dimming, 8 Lighting Effects
Cold Shoe Mounting
Separately Available AC Adapter
The RGB20W RGB On-Camera LED Light from GVM is a compact on-camera variable color temperature light fixture that features cold shoe mounting and includes a tiltable cold shoe bracket. The light fixture features selectable CCT, HSI, and Scene modes. Featuring 162 LEDs, it has a CCT output from 2700 to 10,000K and a CRI of 97. It can produce the RGB spectrum with 360° and 0 to 100% saturation adjustment.

The CCT mode allows you to select your color temperature output with 0 to 100% stepless dimming, allowing you to use the light in a variety of environments from interior to exterior. HSI mode uses the RGB LEDs to provide you a full spectrum color output, so you can adjust the output from 0 to 360° on the RGB scale while adjusting brightness, as well as saturation from 0 to 100%. Scene mode allows you to access eight built-in special effects. A downloadable app allows you to control your fixture from your phone via Bluetooth. Power the light via the built-in L-series battery plate and included battery or using an optional AC power supply.

Operating Modes
RGB Color Mode
Scroll through the RGB color wheel in 1° increments. Dial-in nearly any color in the visible spectrum.
CCT Mode
The traditional correlated color temperature (CCT) mode allows you to accurately adjust your color temperature from 2700 to 10,000K.
Features
Intuitive On-Unit Interface with OLED Display
The built-in OLED screen offers a simple display, while push buttons and a single rotating knob provide local control of the fixture.
GVM LED App
Install the app on your mobile device to remotely control the fixture via Bluetooth to control color temperature, HSI settings, and brightness, as well as on/off and duration. The app is available for both iOS and Android.
Mounting
The fixture features a 1/4"-20 threaded hole on the bottom and includes a tiltable cold shoe bracket that attaches to the rear of the unit by snapping into slots on the back. This allows you to tilt the fixture forward or back as you desire. The tiltable shoe bracket also has a 1/4"-20 threaded hole for mounting on light stands or other supports.
Accessory
A cold shoe is built into the top of the fixture for mounting accessories on the light.
8 Built-In Scene Modes
Police car, candlelight, TV, bad bulb, lightning, party, disco, paparazzi

Black
Brand GVM Great Video Maker
Compatible Devices Camcorder, Camera
Item Dimensions LxWxH 48 x 7.5 x 4 inches
Item Weight 11 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
【High quality motorized slider】-this 49”, 120cm motorized camera slider is made of carbon fiber with a stable carriage assembly and remote controller for improved strength, efficiency, ease of operation, repeatability and flexibility.
【3 shooting modes】-can achieve horizontal/tracking /120º panoramic shooting via adjusting the rod position to get multi-angle shootings effects.The rod position of tracking shooting is up-left & down-right; Panorama shooting is down-left & up-right; horizontal shooting is the horizontal adjustment.
【2 menus of shooting】-one is video capture to make you have uniform motion speed at any time and auto round trip via set starting point and ending point, another is time lapse to get 1000 pieces photos at this time and can accurate step distance and auto round trip via set starting point and ending point.
【With multiple 1/4 "and 3/8" Screw ports 】-The motorized camera slider equipped with multiple 1/4 "and 3/8" Screw ports for installing on the Most of tripod, using the screw holes can vertical, horizontal and 45 degrees shooting.
【 6 shutter release Cable and 1 extension cable】-the motorized camera slider equipped 6 shutter line to compatible most kinds of camera, you can use the extension cable to solve the issue of the line not enough length.All-round to meet your Shooting needs and Improve the shooting Grade, making the shooting more professional and more shocking.

Color 32"/80cm
Brand GVM Great Video Maker
Compatible Devices Camera, Cellphone
Item Dimensions LxWxH 38 x 24 x 12 inches
Item Weight 10 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
SUPPORT MULTIPLE SHOOTING MODES: Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point. Set A/B Points and Time-Lapse Keyframes: Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images.
1 TO 100% ADJUSTABLE SLIDING SPEED: The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode, In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
WIRELESS IOS/ANDROID APP CONTROL: Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion.
1/4"-20 AND 3/8"-16 TRIPOD MOUNT THREADS: The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. 1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
BELT DRIVEN WITH BATTERY-POWERED MOTOR: The motor is positioned on one end of the slider and features a L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras.

Key Features
For Content Creators and Vloggers
196 Lux at 3.3' (5600K)
Variable Color Temperature: 3200-5600K
Battery-Powered Operation
CRI/TLCI: 97+
Smartphone Photo Trigger on Handgrip
Eight FX Modes
HSI and CCT Modes
Two 1/4"-20 Mounting Threads
Two Cold Shoe Accessory Mounts
The TL15RS RGB Bi-Color Smartphone Video Camera Rig Light from GVM features a dual-handgrip and has an adjustable holder in the center to mount virtually any smartphone. The LEDs deliver a variable color temperature of 3200 to 5600K with 1 to 99% brightness dimming. An included battery neatly installs on the back and powers the light. A photo trigger on one of the handgrips works wirelessly over Bluetooth so you can take photos with your phone without taking your hands off the handgrips. Additionally, two shoe mounts allow you to attach accessories to the top, and 1/4"-20 threads let you mount the rig on a tripod or stand in vertical or horizontal setups.

Dual-handgrip and adjustable smartphone holder
Variable color temperature ranging from 3200 to 5600K
Green/magenta correction feature for color balancing with fluorescent lights
Adjustable hue, saturation, and light intensity
Eight FX modes for lightning, cop car, candle, TV, party, disco, bad bulb, and paparazzi
Rechargeable NP-F battery neatly installs on the rear and powers the light
Bluetooth compatible smartphone photo trigger on handgrip
Two shoe mounts to attach accessories
Optional DC power adapter

Key Features
Tripod-Mount Mobile Teleprompter
Supports up to 10.5" Tablets & Phones
iOS/Android Prompting App
Remote Control with Speed/Pause Controls
Compatible with Small & Mid-Size Cameras
The GVM Teleprompter TQ-M has a traditional tripod-mount prompter design and supports up to 10.5" tablets and smartphones. It includes an iOS/Android GVM prompting app and comes with a Bluetooth remote control that works with the app.

Although traditional, the design is compact and lightweight, consisting mainly of a slim base with a camera bracket on the rear and tablet holder on the front. A phone holder is included that can be installed instead of the tablet holder to support most smartphones. The colorless beamsplitter glass with multi-layer dielectric coating for light loss prevention is positioned in the middle with a hood to keep light out of your camera's lens. Virtually any small- or mid-sized camera with any lens diameter can be lined up behind the glass. The camera bracket can be rotated to support compact cameras on one side and larger ones on the other.

The camera bracket can also be moved forward and backward to properly line up your camera, and it's easily secured tool-free via a knob on the bottom. The tablet cradle on the front can similarly be adjusted forward and backward to line up different-sized tablets and phones to the beamsplitter glass. And the beamsplitter glass can be tilted forward and backward to your talent's needs to more clearly reflect the text from your mobile app.

The GVM app allows you to enter text and adjust font size, playback speed, and background color. The included remote control lets you adjust the scroll speed as well as start and pause scrolling remotely.

The main bracket features 1/4"-20 and 3/8"-16 threaded holes on the bottom for mounting compatibility with virtually all tripods, and included 1/4"-20 and 3/8"-16 thumbscrews secure your camera on top.

For easier transport, the prompter breaks down and the different components can be packed away more compact.

Key Features
Tripod-mount mobile teleprompter with tablet and smartphone holders; supports up to 10.5" tablets
Designed for small- to mid-sized cameras
iOS/Android GVM prompting app with adjustable font size, playback speed, and background color
Bluetooth remote control with scroll speed and scroll start/stop controls
1/4"-20 and 3/8"-16 tripod-mount threads
1/4"-20 and 3/8"-16 camera thumbscrews
Colorless beamsplitter glass with multi-layer dielectric coating ensuring no light loss
Base: 22 lb load capacity

Key Features
For Vlogging, YouTube, Streaming, TikTok
1-Person Shoot to Camera/Phone/Computer
Clip-On Transmitter/Mic + Lav Mic
Clip-On Receiver with Headphone Jack
Automatic Pairing for Easy Operation
3.5mm Cables for Camera & Mobile Device
USB-Rechargeable 4-Hour Batteries
Up to 164' Operating Range
The KKX-WM01 from GVM is a compact wireless microphone system providing hands-free audio for videos on Instagram, YouTube, and TikTok or for live-streaming, vlogging, meetings, interviews, and online classes. It offers a complete, versatile, and simple-to-use solution for recording conversations and speech directly to a mirrorless/DSLR camera or a mobile device with a 3.5mm headphone jack.

The KKX-WM01 consists of a small, lightweight clip-on transmitter with its own built-in microphone along with an included lavalier mic that can be used if you prefer a more discreet mic setup. The lav includes a foam windshield to protect against breath and wind noise. The system also includes a small clip-on receiver that mounts on your camera or mobile device and connects to its 3.5mm input jack. Both a 3.5mm TRS cable, for camera and computer use, and a 3.5mm TRRS cable, for smartphone use, are included.

The system delivers reliable transmission with clear sound at a line-of-sight distance up to 164' (98' with limited obstacles). The receiver features a 3.5mm headphone jack, enabling you to monitor your audio in real time. The built-in rechargeable batteries provide up to 4 hours of operation and recharge via USB Type-C ports. A split USB charging cable is included that allows you to charge both components at the same time.

Clip-On Transmitter with Built-In Mic + Lavalier Mic
The compact transmitter is equipped with both a built-in microphone and a 3.5mm input that accepts its included lavalier microphone.
The transmitter can be clipped to your collar, tie, or pocket without having to wire yourself or your talent, providing a fast, truly wireless setup.
Use the lavalier if you prefer a more discreet look and have time to mic up your talent.
Compact Single-Channel Receiver
The tiny, lightweight receiver features a clip to attach to cameras and mobile devices.
The receiver features a 3.5mm output jack.
3.5mm cables for mobile devices and cameras are included.
Straightforward Menu-Free Operation
The system is easy to use, and the components pair automatically.
The transmitter and the receiver are powered for up to 4 hours via a built-in rechargeable battery.
The components feature LEDs to indicate battery status.
A split USB charging cable is included.
Monitor in Real Time
If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.
2.4 GHz Digital Wireless
To avoid interference from TV and radio waves, the system operates in the 2.4 GHz frequency band—far away from television, radio, and UHF wireless microphone transmissions.
The system offers a line-of-sight operating range up to 164 feet or up to 98 feet when some obstacles are present.
For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.
The system offers a low latency of only 10ms.

Key Features
2000 to 5600K Variable Color Dial
Full RGB Color Output
Smartphone App Wi-Fi Control
Dimming, Hue & Saturation Controls
128 x Surface-Mount SMD LEDs
LCD Status Display
10W Power Draw
Includes NP-F550 Type Battery
Includes Tilting Cold Shoe Mount
The RGB-10S LED On-Camera Light from GVM is an LED panel light featuring fully adjustable 2000 to 5600K RGB color, 128 surface-mount SMD LEDs, dual power options, and iOS and Android smartphone app control via Wi-Fi. An LCD on the back of the light shows your chosen brightness, color, and battery levels.

Two dials enable you to adjust the light's intensity and color temperature separately, and an on/off button enables you to save power when the light isn't needed. The GVM RGB-10S comes with a 180° tilt shoe mount, an NP-F550 battery, a compact charger with a flip-out 2-prong wall plug, a soft diffuser, and a velvet storage bag.

Key Features
Full-color RGB 2000 to 5600K output
High 97+ CRI
Smartphone app control via Wi-Fi
128 surface-mount SMD LEDs
Hue, saturation, and dimming control

Key Features
26.1MP APS-C X-Trans BSI CMOS 4 Sensor
X-Processor 4 with Quad CPU
DCI and UHD 4K30 Video; F-Log Gamma
2.36m-Dot OLED Electronic Viewfinder
3.0" 1.04m-Dot Tilting LCD Touchscreen
425-Point Phase-Detection Autofocus
Extended ISO 80-51200, 30 fps Shooting
Bluetooth and Wi-Fi; Sports Finder Mode
XC 15-45mm Lens f/3.5-5.6 OIS PZ Lens
Offering powerful stills and video features, combined with a compact, functional design, the FUJIFILM X-T30 II is a versatile mirrorless camera distinguished by advanced stills and video recording along with sleek and intuitive handling characteristics. Featuring a revised image sensor and processor, both high-resolution stills and 4K video can be recorded while an enhanced autofocus system delivers fast and accurate focusing performance. The 26.1MP APS-C-format X-Trans CMOS 4 image sensor features a back-illuminated design to promote greater image quality throughout the sensitivity range along with a 425-point phase-detection autofocus system for quick, precise AF performance and subject tracking. The 100% phase-detect autofocus provides strong face and eye detection autofocus with a new Face Selection option. Complementing the imaging and focusing is the X-Processor 4, which uses four CPUs for faster image processing as well as continuous shooting up to 8 fps with a mechanical shutter, 30 fps shooting at a 1.25x crop and electronic shutter, and internal DCI/UHD 4K30 video recording.

Sharing a familiar aesthetic of FUJIFILM X-series cameras, the X-T30 II sports a silver finish and classically inspired looks, has prominent physical controls, and has a high-resolution 2.36m-dot OLED electronic viewfinder. The rear 3.0" 1.04m-dot tilting touchscreen LCD can also be used for live view shooting and larger image playback. Additionally, the X-T30 II also sports built-in Bluetooth for wireless sharing and remote control.

FUJIFILM X-T30 II Mirrorless Camera (Silver)
Offering powerful stills and video features, coupled with a compact, functional design, the FUJIFILM X-T30 II is a versatile mirrorless camera distinguished by advanced stills and video recording along with sleek and intuitive handling characteristics. Featuring a revised image sensor and processor, both high-resolution stills and 4K video can be recorded while an enhanced autofocus system delivers fast and accurate focusing performance. The 26.1MP APS-C-format X-Trans CMOS 4 image sensor features a back-illuminated design to promote greater image quality throughout the sensitivity range along with a 425-point phase-detection autofocus system for quick, precise AF performance and subject tracking. The 100% phase-detect autofocus provides strong face and eye detection autofocus with a new Face Selection option. Complementing the imaging and focusing is the X-Processor 4, which uses four CPUs for faster image processing as well as continuous shooting up to 8 fps with a mechanical shutter, 30 fps shooting at a 1.25x crop and electronic shutter, and internal DCI/UHD 4K30 video recording.

Sharing a familiar aesthetic of FUJIFILM X-series cameras, the X-T30 II sports a silver finish and classically inspired looks, has prominent physical controls, and has a high-resolution 2.36m-dot OLED electronic viewfinder. The rear 3.0" 1.62m-dot tilting touchscreen LCD can also be used for live view shooting and larger image playback. Additionally, the X-T30 II also sports built-in Bluetooth for wireless sharing and remote control.

26.1MP APS-C X-Trans BSI CMOS 4 Sensor and X-Processor 4
Sharing a sensor with the professional-oriented X-T3, the X-T30 II features an APS-C-format 26.1MP X-Trans CMOS 4 sensor, which has a back-illuminated design to afford smooth tonal rendering, improved low-light performance, and a low native ISO 160 setting. As an X-Trans sensor, it utilizes a randomized pixel array, too, which provides a high degree of image quality and sharpness due to the omission of an optical low-pass filter. Versus conventional pixel patterns, the X-Trans design more closely mimics the organic nature of film in order to produce nuanced colors and tonal transitions, while also reducing moiré and aliasing.

The sensor's design also includes a 100% phase-detection autofocus system, which has 425 selectable points that covers nearly the entire sensor area. This AF system delivers faster, more accurate focusing performance along with low-light sensitivity down to EV -7. Complementing the imaging and focusing capabilities, an updated X-Processor 4 is also featured, and delivers faster focus response for subject tracking and also supports Face- and Eye-Detection AF when working in AF-C mode and when recording video.
The X-Processor 4 also utilizes four CPU units for faster image processing and it benefits overall performance with faster AF and tracking speeds. Quick continuous shooting is possible, up to 8 fps with a mechanical shutter or 30 fps with an electronic shutter and a 1.25x crop, and internal UHD 4K30 video recording with F-Log is also supported.

UHD and DCI 4K Video Recording
More than a stills camera, the X-T30 offers an enticing array of video capabilities, including internal UHD 4K30 video recording at up to 200 Mb/s—and simultaneous external and internal recording is possible. DCI 4K30 and Full HD 1080p120 recording is also possible, and video files can be saved using either MPEG-4 AVC/H.264 or HEVC/H.265 compressions, and 4K. Greatly benefitting overall video performance, the speed of the quad-CPU X-Processor 4 enables fast read speeds when recording 4K video, which helps to reduce rolling shutter distortion when filming moving subjects.
The X-T30 II also includes the F-Log gamma setting, which provides a flat picture for use in advanced color grading software during editing. This maximizes the potential dynamic range in difficult scenes and image adjustments can be made, as well, to highlight tone, shadow tone, color, and sharpness. When working in F-Log, an updated noise reduction algorithm is available along with 4K inter-frame noise reduction, and the minimum sensitivity has been lowered to ISO 640 to suit working in a broader range of scene types.

Enhanced Autofocus
The X-Processor 4 quad-core CPU inside X-T30 II uses Intelligent Hybrid AF to offer fast, accurate focus in as little as 0.02 sec on any subject, but significant enhancements have been made to track moving subjects, optimizing autofocus for both stills and its powerful 4K/30p video capabilities. Low light focusing performance has also been expanded from the original model, down to -7EV. 425 sensors provide 100% phase detect AF across the frame, with strong face and eye detection AF with new Face Selection option.
Body Design
A bright and clear means for eye-level viewing, a 2.36m-dot OLED electronic viewfinder offers a 0.62x magnification with a fast refresh rate, wide viewing angle, and adjustable diopter settings. The viewfinder remains blackout free while shooting up to the top 30 fps shooting rate, and a unique Sports Finder Mode can also be employed, which highlights a 16.6MP crop area of the sensor in order to allow you to see outside of the image frame.
In addition to the EVF, a rear 3.0" 1.62m-dot LCD touchscreen is available for intuitive live view shooting, playback and review, and settings adjustment and menu navigation. The screen has a two-way tilting design to suit working from high and low angles regardless if shooting with a horizontal or vertical orientation.
The top plate incorporates a series of dials and levers for fast, intuitive control over exposure settings, including a shutter speed dial that offers direct shutter speed adjustment, a mode dial, and an exposure compensation dial to choose +/- 3 EV in 1/3 steps, while a command dial position expands the range to +/- 5 EV for further control.
Front and rear command dials integrate a push function for easier use and settings selection and function buttons can be assigned to control a range of settings.
A dedicated Focus Lever provides faster, more intuitive control over selecting specific focus points while shooting.
Integrated Bluetooth 4.2 low energy allows you to wirelessly share images to a mobile device or use the device to remotely control the camera.
18 Film Simulation and Grain Effect Modes
Taking advantage of FUJIFILM's vast history in traditional film-based photography, the X-T30 II integrates several Film Simulation modes. These customizable modes mimic the look and feel of some of FUJIFILM's classic film types, including Eterna, which copies the look of cinematic film with understated colors and richer shadow tones; Acros, which offers smooth tones, deep blacks, and fine detail; and Classic Chrome, which is designed to deliver muted tones and a deep color reproduction, similar to that of a dated slide film. Several other effects are also available for both monochrome and color shooting. In addition to simulating specific film types, a customizable Grain Effect mode is also available to replicate the look of old film photos with an organic textured appearance, which is especially noticeable when printing.
Bluetooth V4.2 and Wi-Fi Sharing
Use Bluetooth or Wi-Fi to share images with friends and family on social media, by connecting and downloading images to the FUJIFILM Camera Remote App, or instantly connect and print your favorites from any compatible FUJIFILM INSTAX Smartphone printer.
Interval Shooting and Self-Timer
Programmable interval setting allows a preset number of shots, starting time, interval timer, and shooting exposure smoothing for consistent exposures. The selectable self-timer has 2-second or 10-second delay options.

FUJIFILM NP-W126S Li-Ion Battery Pack
For using the maximum power of your mirrorless camera, the FUJIFILM NP-W126S Li-Ion Battery Pack has been designed to better manage heat and ensure lightning fast camera performance. This battery is also compatible with older cameras that use the NP-W126 battery pack, but users will not see any performance advantages in those bodies.

Compatibility
X-H1
X-Pro2
X-Pro1
X-Pro3
X-T3
X-T2
X-T1
X-T30
X-T20
X-T10
X-T100
X-E3
X-E2S
X-E2
X-E1
X-M1
X-A5
X-A3
X-A2
X-A1
X-A10
X100F
FinePix HS50EXR
FinePix HS33EXR
FinePix HS30EXR

UPC: 074101090086
FUJIFILM Body Cap for FUJIFILM X-Mount Cameras
The twist-on Body Cap for FUJIFILM X-Mount Cameras from FUJIFILM fits all FUJIFILM X-Mount cameras and is essential for keeping dust and other objects from entering a compatible camera's lens throat and landing on the sensor when a lens is not mounted.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 82mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-82D Camera Positioning Bracket from NiSi is a rotating collar that attaches to select DSLR camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-82D is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-82D features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-82D features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 82mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 82mm.

The Wizard W-82D is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
DSLR cameras with lenses less than 82mm in diameter
Not compatible with large profile bodies or cameras using battery grips
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Key Features
102MP 43.8 x 32.9mm BSI CMOS Sensor
X-Processor 5 Image Processor
9.44m-Dot EVF
4K60 Video; 10-Bit Out
5-Axis Sensor-Shift Image Stabilization
3.2" 2.36m-Dot Tilting Touchscreen LCD
ISO 80-12800, Up to 8 fps Shooting
Multi Aspect Ratios
FUJIFILM continues to challenge the expectations of medium format mirrorless cameras with the GFX100 II. By incorporating a powerful new 102MP sensor and X-Processor 5 image processor, this camera not only serves as a commanding second iteration of FUJIFILM's flagship model but proves to be an elite and accessible mirrorless option for photographers and filmmakers alike.
Upgrading upon a critical function of any mirrorless camera, the GFX100 II features a massive 9.44m-dot EVF with 120 fps live view and 5 fps of blackout-free shutter use. Additionally, 8-stops of in-body stabilization helps to create sharper images by reducing camera shake and affords you significantly more control of your shutter speeds.
Superior Autofocus Performance
Improved autofocus algorithms and updated tracking ensures your subject stays locked in focus regardless of their movements. Create images at up to 8 fps with the camera's high-speed mechanical shutter or record 4k/60p video at the full width of the GFX100 II's impressive 55mm imaging sensor.
The introduction of these new features elevates the GFX series and solidifies the GFX100 II as a versatile, high-performing medium format mirrorless camera.

102MP BSI CMOS Sensor and X-Processor 5
Featuring a new 102MP resolution 43.8 x 32.9mm BSI CMOS sensor and X-Processor 5, the GFX100 II delivers brilliant autofocus performance with improved tracking. The combination of this high-resolution sensor and processor work together to achieve remarkably fast operation, wide dynamic range, and incredible photo quality, even at higher ISO sensitivities. By incorporating internal subject detection and enhanced autofocus algorithms, FUJIFILM has created a notably reliable autofocus system that keeps subjects in focus while tracking their movement.
4K/60p Video Recording
Take full advantage of the GFX100 II's large sensor and internally record video in 4:2:2, 10-bit Apple ProRes, or use HDMI to record 12-bit 4:2:2 Apple ProRes RAW or Blackmagic RAW in resolutions of up to 8K/30p, or, at the full width of GFX100 II's 55mm sensor, at 4K/60p. Accelerate a project's delivery to color grading workflows in Da Vinci Resolve or Adobe Premiere Pro without any need to transcode original camera files before editing.

Key Features
Medium Format | f/1.7 to f/22
44mm (Full-Frame Equivalent)
Extremely Fast Portrait Prime
DC Motor with GMR Sensor AF System
Rounded 11-Blade Diaphragm
2 x Aspherical, 2 x ED Elements
Weather-Sealed Design & Fluorine Coating
The GF 55mm f/1.7 Lens from FUJIFILM is a lightweight cine-style portrait prime lens designed for GFX-system cameras. This extremely fast prime features a wide f/1.7 aperture to allow for optimum low-light performance and excellent control of your depth of field. 11 aperture blades render the out-of-focus areas of your frame into a smooth, rounded bokeh. With a 44mm full-frame equivalency, this lens functions well for various subjects ranging from street photography to portraiture.

DC Motor with GMR Sensor AF System
The GF 55mm utilizes a powerful DC motor and precision GMR sensor for fast and accurate autofocus.
Wonderous Detail
11 aperture blades create a beautifully rounded bokeh with minimal chromatic aberrations and color shifts.
Lightweight Yet Resilient
Weighing just 1.72 lb, this lens won't slow you down when traveling. Also, enjoy peace of mind even in the rain with the lens's weather-resistant design.

Key Features
40.2MP APS-C X-Trans CMOS 5 HR Sensor
X-Processor 5 Image Processor
Fujinon 23mm f/2 Lens
35mm Full-Frame Equivalent
6-Stop In-Body Image Stabilization
425-Point Intelligent Hybrid AF System
Hybrid 0.66x OVF with 3.69m-Dot OLED EVF
3.0" 1.62m-Dot Tilting Touchscreen
Bluetooth and Wi-Fi Connectivity
20 Film Simulation Modes with REALA ACE

Timeless Design, Cutting-Edge Tech, Unforgettable Imagery
Having refined the retro styling and ergonomics of the rangefinder-inspired X100-series in its viral fifth iteration, FUJIFILM follows up with the tricked-out black X100VI Mirrorless Camera, filling out the timeless, compact, touch-friendly body with the speed, power, and pixel count of its flagship APS-C sensor-and-processor combo. Featuring unsurpassed design and a wealth of upgraded tech, the X100VI is poised to be the every day, everywhere darling of photographers who yearn to transform the mundane into the magical.

40MP X-Trans CMOS 5 HR Sensor, X-Processor 5
The high-resolution 40.2MP X-Trans CMOS 5 HR sensor has an enhanced image-processing algorithm that boosts resolution without compromising the signal-to-noise ratio, delivering astonishing image quality. This sensor has an improved pixel structure, allowing light to be received more efficiently. Partner to the newly designed sensor is a fresh engine X-Processor 5-which uses 64-bit processing to realize 3x faster speeds for both video and photo tasks. The combination of this high-resolution sensor and processor achieves remarkably fast operation, wide dynamic range, and incredible photo quality, even at higher ISO sensitivities.

Powerful Video Capabilities
The powerful video function afforded by the sensor-processor combo means movies can be recorded internally at up to 6.2K at 30p in 10-bit color, along with a 4K HQ mode which oversamples 6.2K footage for superior 4K output. Higher frame rate videos, at 4K 60p or FHD 240p, are also available.

In-Body Image Stabilization, Improved Autofocus
The upgraded sensor-processor combination allows the X100VI to be the first in the series to feature in-body image stabilization. The five-axis sensor-shift IBIS helps to minimize the appearance of camera shake by up to six stops. The improved processing also benefits autofocus performance, producing a faster, more intelligent hybrid focusing system using 425 phase-detection points. Backed by deep learning, an AI adaptive algorithm means this focusing system is better suited to automatically detect and track a variety of subject types, ensuring the magic moment is never missed.

Built for Speed, Built for the Street
Further benefiting street photographers, the X100VI is ready for action, no matter how fast the subject is moving. A top electronic shutter speed of 1/180,000 sec and a maximum mechanical shutter speed of 1/4000 sec will stop any subject in its tracks. Keep your finger down, and the X100VI records images at up to 20 fps with the electronic shutter at a 1.29x crop and 11 fps with the mechanical shutter.

Fujinon 23mm f/2 Lens
Updated in the fifth generation, the camera's Fujinon 23mm f/2 lens features a revised optical design that includes two aspherical elements for improved sharpness and clarity through the reduction of spherical aberrations and distortion. With a 35mm full-frame equivalency, the lens' bright f/2 design handles low-light conditions and affords a shallow depth of field. When it's bright, the built-in 4-stop ND filter can also be used for more control over your exposures and to better enable working with shallow depth of field. While the lens has a fixed focal length, the X100VI integrates 1.4x and 2x digital teleconverter settings to simulate the look of working with longer focal lengths of 49mm and 70mm, respectively.

Advanced Hybrid Viewfinder
Both optical and electronic viewfinder types are incorporated into the unique Advanced Hybrid Viewfinder, which lets you select from the simplicity and familiarity of an OVF as well as the versatility of an EVF. The optical viewfinder provides a clear, lifelike view of the scene for easier composition and subject tracking. Its enhanced design incorporates an Electronic Rangefinder function, which mimics the functionality of a mechanical rangefinder, and simultaneously overlays information from the electronic viewfinder on top of the optical viewfinder for comparative manual focus control.

Film Simulation Modes
Film Simulation modes allow you to reproduce the look and feel of several of FUJIFILM's film types. The X100VI boasts FUJIFILM's latest recipe-REALA ACE-and also includes 19 other modes, including Provia, Velvia, Astia, Classic Chrome, PRO Neg. Std, PRO Neg. Hi, Classic Neg., Nostalgic Neg., Eterna Cinema, Eterna Bleach Bypass, Acros, Acros + Ye Filter, Acros + R Filter, Acros + G Filter, Black & White, Black & White + Ye Filter, Black & White + R Filter, Black & White + G Filter, and Sepia.
In addition to simulating specific film types, a Grain Effect mode is also available to replicate the look of old film photos with an organic textured appearance, which is especially noticeable when printing. Color Chrome and Color Chrome Blue effects are also available to deepen color, tonal response, and gradation with higher saturation colors.

Frame.io Camera-to-Cloud integration
Deliver photos or video straight to the cloud moments after they're created with the first accessory-free integration for Frame.io Camera to Cloud. Use the camera's built-in Wi-Fi or Ethernet LAN connection to connect to Frame.io and deliver hi-res raw or JPEG images, send h.264 video proxies, or upload video securely for review.

Body Design
With the same 5 x 3 x 2.1" dimensions as its predecessor, it weighs just 1.5 oz more for a portable 1.1 lb total weight.
The tilting 3.0" 1.62m-dot LCD has a touchscreen design for intuitive operation and playback.
The durable design can be made weather-resistant when paired with the optional AR-X100 Adapter Ring and optional weather-sealing protection ring.
The top plate incorporates a series of locking dials and levers for fast, intuitive control over exposure settings, including dials for shutter speed and exposure compensation.
Front and rear command dials integrate a push function for easier use and settings selection.
The rear joystick is available for intuitive selecting and switching of AF points as well as menu navigation and image playback.
Integrated Bluetooth and Wi-Fi connectivity allow for wirelessly sharing images to a mobile device or to use the device to remotely control the camera.
Single SD memory card slot supports up to the UHS-I standard.
Included NP-W126S battery provides approximately 310 frames per charge when working with the EVF or 450 frames per charge when working with the OVF.

This CB20 Backpack from Godox holds two AD200, AD200Pro, AD300Pro, or AD400Pro strobe units complete with batteries, chargers, wireless remotes, and compact umbrellas for a fully portable lighting setup. Even when fully packed with the lights and accessories, the CB20 still has room to add a camera with lenses and a spacious lined pocket holds a 15" laptop or tablet.

This backpack features padded construction with dividers to protect its contents. The padded, reinforced shoulder straps offer all-day comfort. It incorporates a reflective strip for high visibility and the strap buckle has an integrated safety whistle in case of an emergency.