Key Features
46" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 48" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 46" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

[Desk Mounting Stand]: You can mount the stand on the table with practical C-clamp that is up to 2.7 inch, saving much available space.
[Durable Material Made]: Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying.
[Applicable and Universal]: Desk clamp stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4? adapter, such as ring light, DSLR camera, video camera, panel light
[What you get]: an aluminum stand

[Desk Mounting Stand]: You can mount the stand on the table with practical C-clamp that is up to 2.7 inch, saving much available space.
[Adjustable Tabletop Light Stand]: Height of stand can be expanded from 12.9 inch(32.7cm) to 22 inch(56cm), support thickness from 0.6 inch(1.5cm) to 3.4 inches(8.8cm).
[Durable Material Made]: Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying.
[Applicable and Universal]: Desk clamp stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4? adapter, such as ring light, DSLR camera, video camera, panel light
[What you get]: an aluminum stand

Key Features
Wireless Programmable Motorized Slider
Robust 31" Portable Travel Slider
Carbon Fiber Rails
Supports up to 5.5 lb
1/4"-20 and 3/8"-16 Tripod Mounting
Hot Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
Integrated Display on Remote Controller
The 31" GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider is a motorized slider you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of slider travel. The slider carriage has a built-in bubble level, so you can check that your setup is level. Built-in feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot-swap for uninterrupted use. The two included NP-F750 type batteries will run the system for approximately 10 hours. The remote features an integrated display and during time-lapse moves can be turned off to save battery power.

Remote Controller
The wireless controller features its own internal battery and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
The 32″ ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31″ of travel.

The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.

You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:

DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the move

Remote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting

The slider can traverse the 31″ sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation

50SM RGB LED Double-sided Light Bi-Color Soft Panel 2-Light Kit from GVM is a great setup for in the studio or on location when you require complete color control. The kit includes two 50SM RGB panels, each with 4-way barndoors, an AC adapter, a power cable, a honeycomb grid, and a light stand. A carry case is also included for storage and transport. The 50SM RGB LED Studio Video Light Panel measures 14.5 x 13.2 x 2″ and has a CCT range from 3200 to 5600K with a very high CRI rating of 97 to indicate advanced accuracy in color rendering. The light also has an RGB mode with 0-360° hue control and 0-100% saturation control to yield millions of color combinations. The light runs on 100-240 VAC current but it can also be powered by two optional 7.4V 4400mAh li-Ion batteries when AC power is unavailable.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
2-Leaf Metal Design
Measures 13.8" Long
Barndoors Run Whole Length of Fixture
Directional Control, Selective Lighting
The 13.8" Barndoors for LED Wand Light from GVM run the whole length of the narrow fixture, allowing you to shape its output from flood to the narrowest of slits for sidelight, hair light, or special effects, or for rendering long, elegant highlights on glassware.

Key Features
7.4V, 6600mAh Capacity L-Series Battery
Pocket Charger with Fold-Out AC Plug
100-240V Worldwide Power Input
LED Status Indicator
GVM's NP-F970 6600mAh Lithium-Ion Battery with Travel Charger provides a portable solution for powering various devices that use an L-series battery. The 7.4V battery offers a 6600mAh capacity, and the compact pocket charger features a fold-out 2-prong AC plug. The charger supports 100-240V worldwide power input and can be used internationally using the proper plug adapter, sold separately. An LED indicator on the charger confirms whether the battery is still charging or already fully charged.

Key Features
For Content Creators and Vloggers
Output: 877 Lux at 3.3' (6400K)
2700 to 10,000K; RGB Control
4 x 9.5"; AC/DC Operation
CRI 97
Onboard and Bluetooth Control
Passive Cooling
0 to 100% Dimming, 8 Lighting Effects
Cold Shoe Mounting
Separately Available AC Adapter
The RGB20W RGB On-Camera LED Light from GVM is a compact on-camera variable color temperature light fixture that features cold shoe mounting and includes a tiltable cold shoe bracket. The light fixture features selectable CCT, HSI, and Scene modes. Featuring 162 LEDs, it has a CCT output from 2700 to 10,000K and a CRI of 97. It can produce the RGB spectrum with 360° and 0 to 100% saturation adjustment.

The CCT mode allows you to select your color temperature output with 0 to 100% stepless dimming, allowing you to use the light in a variety of environments from interior to exterior. HSI mode uses the RGB LEDs to provide you a full spectrum color output, so you can adjust the output from 0 to 360° on the RGB scale while adjusting brightness, as well as saturation from 0 to 100%. Scene mode allows you to access eight built-in special effects. A downloadable app allows you to control your fixture from your phone via Bluetooth. Power the light via the built-in L-series battery plate and included battery or using an optional AC power supply.

Operating Modes
RGB Color Mode
Scroll through the RGB color wheel in 1° increments. Dial-in nearly any color in the visible spectrum.
CCT Mode
The traditional correlated color temperature (CCT) mode allows you to accurately adjust your color temperature from 2700 to 10,000K.
Features
Intuitive On-Unit Interface with OLED Display
The built-in OLED screen offers a simple display, while push buttons and a single rotating knob provide local control of the fixture.
GVM LED App
Install the app on your mobile device to remotely control the fixture via Bluetooth to control color temperature, HSI settings, and brightness, as well as on/off and duration. The app is available for both iOS and Android.
Mounting
The fixture features a 1/4"-20 threaded hole on the bottom and includes a tiltable cold shoe bracket that attaches to the rear of the unit by snapping into slots on the back. This allows you to tilt the fixture forward or back as you desire. The tiltable shoe bracket also has a 1/4"-20 threaded hole for mounting on light stands or other supports.
Accessory
A cold shoe is built into the top of the fixture for mounting accessories on the light.
8 Built-In Scene Modes
Police car, candlelight, TV, bad bulb, lightning, party, disco, paparazzi

Key Features
For Streaming, Portraits, and More
3200-5600K CCT | 97 CRI
RGB Mode: Hue, Saturation, Intensity
Dims 0 to 100%, Wireless App Control
AC Adapter or 2 Optional NP-F Batteries
8 Special Effects and LCD Display
The RGB LED Soft Double Ring Light Kit from GVM features the compact 18" light source with a wide CCT range from a warm 3200K to daylight-balanced 5600K to meet any ambient light challenge. The light offers full-spectrum hue/saturation/intensity color control, has multiple pre-loaded special effects, and all modes can be accessed from an optional GVM Control app.

Key Features
2700-7500K Color Temperature, 200W
360° RGB Color Selection
8 Special Effects
iOS/Android App Control
Soft Light Cover, Diffuser
The GVM SD200R is a multi-functional LED spotlight featuring a 2700 to 7500K color temperature in white light mode. Download the free GVM app for iOS or Android to choose from 360° RGB colors, adjust saturation, and select from eight special effects, including candlelight and paparazzi. Brightness is adjustable from 0 to 100%. The light is powered by an included 32 VDC, 7A power supply.

97+ CRI
Aluminum housing
Heat dissipation holes
Acrylic soft light cover
LCD display
Master, slave, rotate, and iOS/Android app modes

Key Features
5600K Color Temperature, 97+ CRI/TLCI
120° Beam Angle, Dims 0-100%
Multi-Voltage Adapter, Quiet Fan Cooling
AC Adapter, Aluminum Construction
Employing a familiar, easy-to-use monolight form factor, the Daylight LED Video Light S300S from GVM is a versatile light source with a daylight color temperature of 5600K to blend seamlessly when shooting outdoors or in situations where daylight-balanced light fixtures are used. The light's high CRI/TLCI rating of 97 is an indicator of advanced accuracy in rendering color. The S300S has beam spread options for selective lighting or wide coverage, and is dimmable from 0 to 100%. You can make adjustments to light intensity using the included wireless remote control or from a console via onboard DMX.

The aluminum-constructed S300S runs on AC voltage using the included multi-voltage adapter, and it has a Bowens-front accessory mount for the reflector and for access to the many modifiers that use this popular mount.

Benefits
300W COB daylight LED lamp head, which is closer to the natural light
Supports DMX console and remote control operation
Supports multiple modes, including Master, DMX, Rotate, and Slave
Quiet fan cooling
CRI/TLCI: 97+
Dims 0-100%
Bowens front accessory mount
Onboard DMX

Key Features
For Strobe, LED, and Fluorescent Lights
Beam Spread: 270°, Absorbs One Stop
With Bowens-Style Speed Ring
Tension-Based Quick Release Design
Includes Fabric Skirt for Light Control
The Lantern Globe Softbox from GVM is a 26" spherical, globe-style softbox that can evenly illuminate an entire room set, providing a natural-looking soft light. Well suited to both still photo and video applications, the fully assembled modifier sets up in seconds, and uses a tension-based frame to retain its shape. The popular Bowens-style mount is compatible with a wide range of strobe lights and continuous light sources, like LED monolights. The radius of the omni-directional light output may be flagged and controlled by attaching the included softbox skirt.
Omni-directional soft light output
Bowens-style speed ring
Set up and break down in seconds
Fully assembled, no loose rods

Key Features
Tripod-Mount Mobile Teleprompter
Supports up to 10.5" Tablets & Phones
iOS/Android Prompting App
Remote Control with Speed/Pause Controls
Compatible with Small & Mid-Size Cameras
The GVM Teleprompter TQ-M has a traditional tripod-mount prompter design and supports up to 10.5" tablets and smartphones. It includes an iOS/Android GVM prompting app and comes with a Bluetooth remote control that works with the app.

Although traditional, the design is compact and lightweight, consisting mainly of a slim base with a camera bracket on the rear and tablet holder on the front. A phone holder is included that can be installed instead of the tablet holder to support most smartphones. The colorless beamsplitter glass with multi-layer dielectric coating for light loss prevention is positioned in the middle with a hood to keep light out of your camera's lens. Virtually any small- or mid-sized camera with any lens diameter can be lined up behind the glass. The camera bracket can be rotated to support compact cameras on one side and larger ones on the other.

The camera bracket can also be moved forward and backward to properly line up your camera, and it's easily secured tool-free via a knob on the bottom. The tablet cradle on the front can similarly be adjusted forward and backward to line up different-sized tablets and phones to the beamsplitter glass. And the beamsplitter glass can be tilted forward and backward to your talent's needs to more clearly reflect the text from your mobile app.

The GVM app allows you to enter text and adjust font size, playback speed, and background color. The included remote control lets you adjust the scroll speed as well as start and pause scrolling remotely.

The main bracket features 1/4"-20 and 3/8"-16 threaded holes on the bottom for mounting compatibility with virtually all tripods, and included 1/4"-20 and 3/8"-16 thumbscrews secure your camera on top.

For easier transport, the prompter breaks down and the different components can be packed away more compact.

Key Features
Tripod-mount mobile teleprompter with tablet and smartphone holders; supports up to 10.5" tablets
Designed for small- to mid-sized cameras
iOS/Android GVM prompting app with adjustable font size, playback speed, and background color
Bluetooth remote control with scroll speed and scroll start/stop controls
1/4"-20 and 3/8"-16 tripod-mount threads
1/4"-20 and 3/8"-16 camera thumbscrews
Colorless beamsplitter glass with multi-layer dielectric coating ensuring no light loss
Base: 22 lb load capacity

The base and bracket made of aluminum alloy make the equipment both light and strong.

The whole set of equipment adopts a simple and user-friendly hand-twisted screw structure, which is quick to install and has a multi-position installation method.

The distance between the camera/tablet clip/mobile phone clip and the mirror screen and the camera height can be adjusted as needed.

The operation is simple and the control is convenient.
Compatible with the installation of various photographic equipment such as SLR/digital.

The mirror plane adopts a colorless beamsplitter, a multi-layer dielectric coating (hard film) on the surface, no light loss, suitable for the various high-definition lens, wide-angle design, prompter document display is clear, no reflection, and no flaws will be exposed during shooting.

Key Features
For Vlogging, YouTube, Streaming, TikTok
1-Person Shoot to Camera/Phone/Computer
Clip-On Transmitter/Mic + Lav Mic
Clip-On Receiver with Headphone Jack
Automatic Pairing for Easy Operation
3.5mm Cables for Camera & Mobile Device
USB-Rechargeable 4-Hour Batteries
Up to 164' Operating Range
The KKX-WM01 from GVM is a compact wireless microphone system providing hands-free audio for videos on Instagram, YouTube, and TikTok or for live-streaming, vlogging, meetings, interviews, and online classes. It offers a complete, versatile, and simple-to-use solution for recording conversations and speech directly to a mirrorless/DSLR camera or a mobile device with a 3.5mm headphone jack.

The KKX-WM01 consists of a small, lightweight clip-on transmitter with its own built-in microphone along with an included lavalier mic that can be used if you prefer a more discreet mic setup. The lav includes a foam windshield to protect against breath and wind noise. The system also includes a small clip-on receiver that mounts on your camera or mobile device and connects to its 3.5mm input jack. Both a 3.5mm TRS cable, for camera and computer use, and a 3.5mm TRRS cable, for smartphone use, are included.

The system delivers reliable transmission with clear sound at a line-of-sight distance up to 164' (98' with limited obstacles). The receiver features a 3.5mm headphone jack, enabling you to monitor your audio in real time. The built-in rechargeable batteries provide up to 4 hours of operation and recharge via USB Type-C ports. A split USB charging cable is included that allows you to charge both components at the same time.

Clip-On Transmitter with Built-In Mic + Lavalier Mic
The compact transmitter is equipped with both a built-in microphone and a 3.5mm input that accepts its included lavalier microphone.
The transmitter can be clipped to your collar, tie, or pocket without having to wire yourself or your talent, providing a fast, truly wireless setup.
Use the lavalier if you prefer a more discreet look and have time to mic up your talent.
Compact Single-Channel Receiver
The tiny, lightweight receiver features a clip to attach to cameras and mobile devices.
The receiver features a 3.5mm output jack.
3.5mm cables for mobile devices and cameras are included.
Straightforward Menu-Free Operation
The system is easy to use, and the components pair automatically.
The transmitter and the receiver are powered for up to 4 hours via a built-in rechargeable battery.
The components feature LEDs to indicate battery status.
A split USB charging cable is included.
Monitor in Real Time
If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.
2.4 GHz Digital Wireless
To avoid interference from TV and radio waves, the system operates in the 2.4 GHz frequency band—far away from television, radio, and UHF wireless microphone transmissions.
The system offers a line-of-sight operating range up to 164 feet or up to 98 feet when some obstacles are present.
For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.
The system offers a low latency of only 10ms.

Key Features
2000 to 5600K Variable Color Dial
Full RGB Color Output
Smartphone App Wi-Fi Control
Dimming, Hue & Saturation Controls
128 x Surface-Mount SMD LEDs
LCD Status Display
10W Power Draw
Includes NP-F550 Type Battery
Includes Tilting Cold Shoe Mount
The RGB-10S LED On-Camera Light from GVM is an LED panel light featuring fully adjustable 2000 to 5600K RGB color, 128 surface-mount SMD LEDs, dual power options, and iOS and Android smartphone app control via Wi-Fi. An LCD on the back of the light shows your chosen brightness, color, and battery levels.

Two dials enable you to adjust the light's intensity and color temperature separately, and an on/off button enables you to save power when the light isn't needed. The GVM RGB-10S comes with a 180° tilt shoe mount, an NP-F550 battery, a compact charger with a flip-out 2-prong wall plug, a soft diffuser, and a velvet storage bag.

Key Features
Full-color RGB 2000 to 5600K output
High 97+ CRI
Smartphone app control via Wi-Fi
128 surface-mount SMD LEDs
Hue, saturation, and dimming control