The GVM Turtle Base cstand Grip Arm Kit is specially designed for mounting lighting equipment and a variety of light-shaping tools and accessories.

The C-Stand comes with a detachable turtle base that can be removed from the riser section, for easier transportation and allowing you to mount a light to it.

The stand’s base is a unique staggered 3 leg construction with each leg set at a different height to allow the legs to be nested and placed extremely close to one another on a set.

The 3 riser section columns feature a spring-loaded design that can safely protect the light from the damage of impact caused by the riser suddenly dropping down during adjusting height. to make the whole riser height-adjustable from 53.15”/ 1.35 m to 125.98” / 3.2 m.

In order to improve strength, the riser sections and the base is made of durable stainless steel, making it several times stronger than traditional aluminum designs to sustain the heavyweight of sandbags.

The connectors between riser sections and head grips are chrome coated from aluminum in order to prevent damage and maintain longevity.

Key Features
11 lb Load Capacity
23" Sliding Range
Aluminum Alloy Construction
1/4"-20 and 3/8"-16 Screw Holes
Vertical, Horizontal, and 45° Shooting
Non-Slip Feet
Camera Platform Lock
Controller
Lithium-Ion Battery Pack and Charger
Carrying Bag
The 23" Professional Video Aluminum Alloy Motorized Camera Slider from GVM is a lightweight slider designed for video recording and time-lapse photography. It supports loads up to 11 lb and features 1/4"-20 and 3/8"-16 screw holes for use on the floor, on the table, or via a ball head connected to the camera. It supports vertical, horizontal, and 45° shooting. A controller, lithium-ion battery, battery charger, and carrying bag are included.

Designed for wedding/event photography, studio, and film/video recordings
You can attach the tilt head to the dolly, adjust the slide and tilt head for straight horizontal shots, and find the balance quickly with the built-in precision spirit level
Suitable for all high-performance DSLRs, mirrorless, bridge, and video cameras, and other photographic equipment
Total number of photos calculated based on the time
When using time-lapse photography, you can check the remaining number of shots
Conveyor belt
Non-slip feet
Camera platform lock

Key Features
46" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 48" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 46" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

[Desk Mounting Stand]: You can mount the stand on the table with practical C-clamp that is up to 2.7 inch, saving much available space.
[Durable Material Made]: Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying.
[Applicable and Universal]: Desk clamp stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4? adapter, such as ring light, DSLR camera, video camera, panel light
[What you get]: an aluminum stand

[Desk Mounting Stand]: You can mount the stand on the table with practical C-clamp that is up to 2.7 inch, saving much available space.
[Adjustable Tabletop Light Stand]: Height of stand can be expanded from 12.9 inch(32.7cm) to 22 inch(56cm), support thickness from 0.6 inch(1.5cm) to 3.4 inches(8.8cm).
[Durable Material Made]: Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying.
[Applicable and Universal]: Desk clamp stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4? adapter, such as ring light, DSLR camera, video camera, panel light
[What you get]: an aluminum stand

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Kit Includes】: 2022 Upgraded RGB video lights, Package:(2)GVM 1000D RGB LED Video Light with U Bracket and Barndoor; (2)Power Cable; (2)Power Adapter; (2)White Diffuser; (2)Light Stand; (2)GVM Softbox; (1)Carrying Bag;
【Super Bright Video Light】: Equipped with 736 led beads (96 RGB SMD led beads, 640pcs spotlight led beads), which are brighter than other RGB panel lights. 45W High Power, lumens is 15000lux/0.5m, 5000lux/1m. Super bright that can fill your studio room, providing you a natural and vivid shooting effect.
【Update Simulate Scene Modes】:The video light simulate 8 kinds of the scene lights. It enrich your shooting environment, including TV, Candle, Cop Car, Lightning, Paparazzi, Disco, Party, Bad bulb. Save a lot of time in the editing and more convenient for work.
【APP Bluetooth Control】: This video light has updated APP, no need to use wifi, just connect to the phone’s Bluetooth to use it.Brightness, color temperature(3200K-5600K), hue, saturation, scene mode can all be remotely controlled more smoothly on your phone.In addition, GVM 1000D support master and Slave control mode: You could set one light as the master mode and other studio lights as slave mode.
【Durable Structure & Accessories】: Made of excellent premium aviation aluminum alloy, this video light shows the simple elegant appearance and durable use with better heat dissipation system. Light stand with 23.6-78.7 inches adjustable height is designed for heavy duty work. Come with Softbox, it can help the video light illuminate softer and more uniform light.

Powerful RGB Led Video Light: 2022 Upgraded RGB video lights, 65W high power light, Consist with 960pcs Highlight LED beads, lumen is 25000lux/0.5m, 10000lux/1m.comes with two output ways. The first mode is that you can adjust the color temperature between 3200K-5600K. The second mode is that you can adjust the hue output (0°~360°) and color saturation of red, green, and blue from 0% to 100%
APP Bluetooth Control System: You can set the channel, adjust the color temperature/brightness/HSI parameters/Scenes through the button and knob on the panel with clear LCD screen or by downloading GVM app in such as Apple Store/Google Play, etc through your smart mobile device for easy operation.
Built-in Scenes Modes: This RGB Video Light supports 8 kinds of special lighting scenes to enrich your shooting environment, including TV, Candle, Cop Car, Lightning, Paparazzi, Disco, Party, Bad bulb.
Master & Slave Control Mode: GVM 1300D video light support master and slave control mode. You can set one light as the master mode and the other lights as slave mode, which is convenient to control all lights with the master one (Master mode need to switch the Bluetooth mode if you would like to use the app to control all light)
It consists of 960 LED Lamp beads: This video light is adopted by the American Chip and has a life of more than 100000 hours. It's designed with aerospace aluminum alloy Casing to effectively help the LED light to better dissipate heat. LED Panel light can use two modes to power, you can use an AC adapter and Sony F750/970 battery (not included) to supply power outdoor or indoor

1/4″ and 3/8″ Screw. Motorized camera sliders with 1/4 “and 3/8” tapped holes can be mounted on a tripod or light stand to support multiple angles.

It can also be used on feet and height-adjustable floors.

Multi-target Switching

With 2 axes (horizontal, tilt, and rotation), you can easily switch shooting targets, and also make a smooth transition between these targets as the slider moves.

Multi-angle Shooting with High Load Capacity

The camera slider is compatible with light stands or camera tripods for shooting at different angles.

Moreover, it has a load capacity of up to 11 pounds, which makes horizontal and vertical shooting smoother.

Powered by AC adapter or NP F750 battery (not included). In time-lapse mode, the battery may last for nearly 10 hours
GVM 2D 2-Axis Wireless Carbon Fiber Motorized Slider

1x Motorized Slider

1 x Controller

x Battery

2 x Battery Charger

1 x Controller Connection Line

6 x Shutter Link

1 x Shutter Extension Line

1 x Carrying Bag

Led video lighting kit with app control: LED Panel lighting kit, app control model, Color temperature is between 2300k-6800k and High brightness is between 10%-100%, Has a new addition of digital display screen, accurately displaying the parameters.
Adjustable light board: The Photography Lighting Kit is distributed and with an adjustable soft board, its very a helpful Studio Lighting Kit for portrait and video.
Ac/ DC power options: wireless operation with AC adapter (supplied) or Sony NP-F550 np-f970 Li-ion battery (not included).
Metal shell and u-shaped frame: featured with the durable aluminum alloy shell, The Lighting Kit has an excellent heat dissipation effect. With an adjustable U-shaped bracket, the Panel Lighting Kit can be put on the light stand or on the ground.
All GVM Photography Lighting Kit includes one year service. Package Includes 2XLED video lights, 2x AC adapters, 2 x bracket-white diffusers, 2 x Power cables, 2 x light stands, and a handbag.

50SM RGB LED Double-sided Light Bi-Color Soft Panel 2-Light Kit from GVM is a great setup for in the studio or on location when you require complete color control. The kit includes two 50SM RGB panels, each with 4-way barndoors, an AC adapter, a power cable, a honeycomb grid, and a light stand. A carry case is also included for storage and transport. The 50SM RGB LED Studio Video Light Panel measures 14.5 x 13.2 x 2″ and has a CCT range from 3200 to 5600K with a very high CRI rating of 97 to indicate advanced accuracy in color rendering. The light also has an RGB mode with 0-360° hue control and 0-100% saturation control to yield millions of color combinations. The light runs on 100-240 VAC current but it can also be powered by two optional 7.4V 4400mAh li-Ion batteries when AC power is unavailable.

Key Features
2 Lights with Stands and Case
For Studio and Video Production
Output: 2000 Lux at 3.3' (5600K)
3200 to 5600K CCT; Bi-Color Control
13.4 x 12.7" Panel; AC/DC Operation
CRI 97 | TLCI 97
On-Board and Wireless Control
Passive Cooling for Silent Operation
0-100% Dimming
Set of 4-Leaf Barndoors and Diffuser
This 672S-B Bi-Color LED Panel 2-Light Kit from GVM offers a complete lighting system with advanced color and power options. The kit includes two black 672S-B bi-color LED panels, each with a set of 4-way barndoors, an AC power adapter, a soft filter, and a light stand. A wireless remote for control and a case for storage and transport are also included.

The panel measures just 10.3 x 9.3 x 3" and is designed to meet ambient light challenges for creative expression. It has a variable color temperature range of 3200 to 5600K and high 97 CRI/TLCI ratings to indicate accurate color.

The panel has a wide beam spread that you control with the four-way barndoors. Simply swing one or more of the barndoor leaves into the path of the beam to keep light from areas you don't want illuminated. The light is dimmable and you can make adjustments locally on the fixture or wirelessly with up to 120 fixtures via GVM's 12-channel Multi-Function Master/Slave Control or with the included wireless remote control. The panel is powered via the included 110-220V AC adapter, but it will also run on user supplied NP-F-type batteries when mains power is unavailable. The light comes with a diffusion filter to soften the bright LEDs.

Complete lighting system with advanced color and power options
Variable color temperature range of 3200 to 5600K
High CRI/TLCI ratings are 97 for accurate color
Dimmable fixture with wide beam spread
Includes barndoors and diffuser
Dual-voltage for worldwide use
Runs on optional NP-F-type batteries when mains power is unavailable

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

The RGB LED Studio Video Light Bi-Color Soft Light Panel GVM-850D is specially designed for senior photography enthusiasts. The product is suitable for live/outdoor / studio photography, and also for youtube video shooting.

The main features of the product are Step-less adjustable RGB color and dual color temperature feature, color range 3200K ~ 5600k, with 624 LED bulbs, which is helpful to restore and enrich the color of objects and provide you with natural and vivid shooting effect;

App intelligent control system, which can be controlled by your intelligent mobile device;

Master-Slave Control System: Download the app “GVM” on your mobile phone, you can easily control any video lighting. It also has a wireless Master-Slave Control function. Each LED Panel could be set as the master video light to control the same series of LED video lights.

With an LCD screen and stable system, it supports 360° rotation and can effectively control the light. You can also install a folding and soft light board to avoid excess light, make the light softer, and customize the fill light, allowing you to easily and casually shoot the desired results.

The product can simulate 8 kinds of scene lights: Lightning, Police car, Candlelight, TV, Bad light bulb, Party, disco, Paparazzi.

Features
CCT Colour: 3200 to 5600K, Length: 36.8"
Adjustable RGB/Bi-Colour Settings, CRI:97
APP Control, Optional Battery
This GVM RGB LED Tube Wand was created to illuminate the scene when you shoot live broadcasts, outdoor or studio photography, and videos for YouTube. The wand combines an extended continuous variable colour temperature range with a multi-hued RGB colour palette.

The light stick can be tuned to meet ambient conditions, with variable colour from 3200 to 5600K, and is dimmable from 0 to 100%. The RGB range allows you to choose from a myriad of colours and hues. The wand has a high CRI rating of 97 to assure accurate colour reproduction. It has an App intelligent control system which can be adjusted by your mobile device. The battery option makes it fun and convenient to use.

Specifications
Light Fixture
Photometrics 84 fc / 903.8 Lux at 3.28' / 1 m
Colour Temperature 3200 to 5600K
Colour Accuracy Standard CRI 97
Dimming Yes
Housing Material ABS Plastic, Aluminium
Fixture Weight 6.94 lb / 3.15 kg
Mounting
Yoke Mount None
Remote Operation
Remote Control Type Bluetooth
Power
AC Input Power 100 VAC, 50 / 60 Hz
DC Input Power 32 VDC at 7 A
Power Source AC Adapter, External Battery

Key Features
For Photo & Video Enthusiasts
Output: 900 Lux at 3.3' for Each Light
3200-5600K CCT; RGB Mode
Onboard & App Control
CRI 97
8 Preset Special Effects
Built-In Rechargeable Battery; AC Power
Double Lamp Bracket for Mounting
Aluminum and Plastic Construction
Includes Power Adapters, Bracket & Bag
Use this GVM BD100 2-Light Kit to illuminate the scene when you shoot live broadcasts, outdoor or studio photography, and videos for YouTube. Each 3' wand outputs up to 900 lux at 3.3' and combines an extended continuous variable color temperature range with a multi-hued RGB color palette. They can be tuned to meet ambient conditions, have variable color from 3200 to 5600K, and are dimmable from 0 to 100%. The RGB range allows you to choose from a myriad of colors and hues while the high CRI rating of 97 assures accurate color reproduction.

The BD100 can be controlled onboard via an easy-to-use OLED display with control via the panel control or an app with your mobile device. You can effortlessly adjust and customize the light's settings to achieve your desired parameters. The integrated battery can be recharged with the included power supply. This kit includes a double lamp bracket for mounting as well as a bag for convenient storage and transportation of the entire kit.

Special Effects
The BD100 features eight built-in special effects to choose from including lightning, cop car, candlelight, TV, bad bulb, party, disco, and paparazzi.

Key Features
Two BD-60 Wands, Cords, Power Adapters
Double Lamp Bracket, Carry Case
For Photo and Video Enthusiasts
Output: 700 Lux at 3.3'
3200-5600K CCT, RGB Mode
Bluetooth and App Remote Control
CRI 97
8 Special Effects
Rechargeable Battery
OLED Display
This BD-60 RGB LED 2-Light Wand Kit with Bracket from GVM is perfect for when you have mastered a single wand, and now want two. Included are two 21.8" RGB LED wands, each with a power adapter and cord. The double bracket allows you to use the lights in tandem.

GVM Barndoors for P80S, G100W, RGB150S, LS150D, and S300S LED Lights
Key Features
4-Leaf Metal Design
Measures 13 x 13"
Directional Control, Selective Lighting
The all-metal Barndoors for P80S, G100W, RGB150S, LS150D, and S300S LED Lights from GVM slip easily into the accessory channel of these fixtures to modify the shape of the output. Simply swing one or more barndoors leaves into the fixture's beam to light areas you want to be lit while keeping light from areas you don't want illuminated.